|
Best Jailbreak option?
|
|
|
Modking30
AfterDawn Addict
|
3. November 2010 @ 17:02 |
Link to this message
|
I have been doing some reading. I have read that new games have 3.5 encryption and that the jailbreak won't work? I have also read the best method to boot games is an internal hard drive. Can I install a 500GB 2.5" sata? If I can only play old games, then I probably won't do it. I am sure banning is a risk like on the xbox. If I can play all games, then what jailbreak device is the best? I would like to have something I don't have to keep plugged in, but if price is a huge difference, that's fine. Any help appreciated.
|
|
Advertisement
|
 |
|
|
|
emugamer
Suspended due to non-functional email address
|
3. November 2010 @ 18:19 |
Link to this message
|
Originally posted by Modking30:
I have been doing some reading. I have read that new games have 3.5 encryption and that the jailbreak won't work? I have also read the best method to boot games is an internal hard drive. Can I install a 500GB 2.5" sata? If I can only play old games, then I probably won't do it. I am sure banning is a risk like on the xbox. If I can play all games, then what jailbreak device is the best? I would like to have something I don't have to keep plugged in, but if price is a huge difference, that's fine. Any help appreciated.
The new games that I've come across can be patched to run on 3.41. I haven't played one that can't. Force Unleashed 2 is the latest that I've patched to work on my JB PS3. Although I haven't tried MOH, people say it works.
I'd like to see the reasons why booting off the internal HDD is the best. Makes no difference to me. There are a handful of games that have files that are too large for a FAT32 drive. I only have 8 of those installed on my PS3. My remaining backups are all off my external drive. Of all the games I've tried, about 90% work. I guess it helps if you want to play a 4-player local game. But you can always ftp games back and forth from PS3 to PC if you run low on HDD space.
Banning is not even something to think about now. You can only JB with 3.41 or lower. So you can't even sign on to the PSN since they require you to get the latest firmware. So only JB if you've resigned yourself to not being able to go online anymore.
You don't need to keep the JB device plugged in. Once you get it in JB mode, you can remove it and go about your business. At least that is what I've done with the TI-84+.
As far as I know, you can't update games yet. When a game asks if you want to update to the latest version, then the only thing to do is cancel and proceed with the game. Retail update packages can be downloaded, but not installed in JB mode. Someone correct me if I'm wrong. It's been a few weeks since I've looked into game updates.
This message has been edited since posting. Last time this message was edited on 3. November 2010 @ 18:20
|
|
Modking30
AfterDawn Addict
|
3. November 2010 @ 18:29 |
Link to this message
|
|
So which jail break device should I buy? Preferably one that can be updated when needed.
|
|
fyygame
Suspended due to non-functional email address
|
4. November 2010 @ 03:13 |
Link to this message
|
|
The ps3key is better. it support update
Cool Game Accessories and Game Consoles supply-PS Jailbreak USB
|
|
GBX_Lee
Member
|
4. November 2010 @ 03:57 |
Link to this message
|
All the PS3 Jailbreaks are all the same , But I would recommend P3GO , at least it may have extra features and the price is competitive .
|
AfterDawn Addict
1 product review
|
4. November 2010 @ 07:54 |
Link to this message
|
|
They are not all the same...the most expensive one never gets updates, some of the best units don't have cases, and you can even switch between PL3 and Hermes V4B on some units (like my arduino). Plus, some of them have PICs that can't be reprogrammed without desoldering.
BTW...I do not recommend the arduino unless you already have one around or if you just like to solder. I think there are other units with payload selection, I just haven't looked.
|
|
Modking30
AfterDawn Addict
|
4. November 2010 @ 09:14 |
Link to this message
|
I'm a total Ps3 noob. All I want it to do is boot all games and make sure it is going to last. I want one that has the best support I guess. Is there a guide on here on how to jailbreak? I have not seen one.
|
|
Riisan
Junior Member
|
4. November 2010 @ 11:32 |
Link to this message
|
i have a ps3key and its quite ok so far. they're already updated up to v4.
encountered some probs but looks like they're common probs for all jailbreakers
(booting game probs)
*edit* oh yea and its quite simple to jb ur ps3
all usb dongles come with their own tutorial - mainly booting up with usb plugged in
This message has been edited since posting. Last time this message was edited on 4. November 2010 @ 11:34
|
|
Modking30
AfterDawn Addict
|
4. November 2010 @ 11:45 |
Link to this message
|
|
How much am I looking at? Can someone tell me which one to get? LOL
|
|
Riisan
Junior Member
|
4. November 2010 @ 12:37 |
Link to this message
|
|
u cant get a single name as its a matter of opinion
its up to u to decide
they're all good
and most of them arent that expensive
just search one which is
not a clone
upgradable
affordable for ur own budget
they all work
This message has been edited since posting. Last time this message was edited on 4. November 2010 @ 12:39
|
|
Modking30
AfterDawn Addict
|
4. November 2010 @ 14:53 |
Link to this message
|
|
where is the best place to get the P3GO?
This message has been edited since posting. Last time this message was edited on 4. November 2010 @ 14:57
|
|
emugamer
Suspended due to non-functional email address
|
4. November 2010 @ 21:35 |
Link to this message
|
Originally posted by Modking30:
where is the best place to get the P3GO?
I'd stay away from clones. My advice is to choose the usb dev board option. You will be able to update a lost faster from the open source community. You'll always have the ability to load custom payloads. P3GO has impressive specs and "promises" to provide the ability to load "non-official" updates "soon." I personally don't like to keep any of my eggs in one basket.
|
|
Modking30
AfterDawn Addict
|
4. November 2010 @ 22:38 |
Link to this message
|
Originally posted by KillerBug:
They are not all the same...the most expensive one never gets updates, some of the best units don't have cases, and you can even switch between PL3 and Hermes V4B on some units (like my arduino). Plus, some of them have PICs that can't be reprogrammed without desoldering.
BTW...I do not recommend the arduino unless you already have one around or if you just like to solder. I think there are other units with payload selection, I just haven't looked.
which one would you recommend?
|
AfterDawn Addict
1 product review
|
5. November 2010 @ 04:04 |
Link to this message
|
The x3max is a good choice because it is essentially a Teensy 2.0++, but with more features and at a lower cost...and it has a nice plastic case. (and unlike the Teensy++, it is not on global backorder) The P3GO seems like it should be the best unit around, but it seems to need unique firmware designed for it (I can't say this for sure; this is just what I have picked up from their spec sheet that says the unit uses a professionally designed firmware)...so I can't recommend it.
|
|
Modking30
AfterDawn Addict
|
5. November 2010 @ 10:04 |
Link to this message
|
|
Thanks guys. Any tips on where to buy the x3max?
|
AfterDawn Addict
|
5. November 2010 @ 12:29 |
Link to this message
|
Quote:
Thanks guys. Any tips on where to buy the x3max?
Depends on where you live.
Here are the distributors list on where to order one from.
x3MAX
|
|
Modking30
AfterDawn Addict
|
5. November 2010 @ 13:05 |
Link to this message
|
|
$50 for it + shipping. Wow, seems to be pricy but worth it. Cost of one game.
|
AfterDawn Addict
1 product review
|
5. November 2010 @ 23:30 |
Link to this message
|
|
It is the Porsche of jailbreaks...we know a lot more about the P3GO now, and it is clear that the x3max is still better, at least for the time being.
|
Junior Member
|
6. November 2010 @ 03:35 |
Link to this message
|
Originally posted by KillerBug:
The x3max is a good choice because it is essentially a Teensy 2.0++
Well, I guess we'll have to take their word for that.
This statement would be easier to verify, if the X3MAX manufacturers hadn't disfigured their own chips by scraping all the identifying markings off the top of them :
http://www.ps3-hacks.com/2010/10/30/x3-max-setup-and-review/
... thanks to bigo93 for the link :-)
Does that give you a warm and fuzzy feeling about the quality of the X3MAX product ?
Originally posted by KillerBug:
at a lower cost.
The Teensy++ 2.0 is only $24 + shipping (the "with pins" version is $3 extra, but you don't need this for JB) :
http://www.pjrc.com/store/teensypp.html
The X3MAX is $48.50 + shipping.
How do you conclude the X3MAX is "at a lower cost" ?
Originally posted by KillerBug:
unlike the Teensy++, it is not on global backorder
PJRC are receiving a sh*tload of new stock on November 22. Not long to wait for a quality product !
This message has been edited since posting. Last time this message was edited on 6. November 2010 @ 03:42
|
AfterDawn Addict
1 product review
|
6. November 2010 @ 04:51 |
Link to this message
|
Right now, the only way to get a ++ is to buy from one of the scalpers, at $60 or more...so the x3 is cheaper.
They claim they will have stock in Nov 22; they also claimed they would have stock back in october, and before that it was september. I am still waiting for my order from september. If you buy now, you will be waiting.
The x3max is essentially the teensy++ because it can use teensy++ hex files...like AsbestOS. It is not identical; this is obvious from the fact that it has more features.
|
Junior Member
|
14. January 2011 @ 12:37 |
Link to this message
|
Originally posted by KillerBug:
Right now, the only way to get a ++ is to buy from one of the scalpers, at $60 or more...so the x3 is cheaper.
They claim they will have stock in Nov 22; they also claimed they would have stock back in october, and before that it was september. I am still waiting for my order from september. If you buy now, you will be waiting.
The x3max is essentially the teensy++ because it can use teensy++ hex files...like AsbestOS. It is not identical; this is obvious from the fact that it has more features.
Hi People,
I ordered the X3max only a few days ago from teensy.co.uk, the unit itself cost me £26.00 GBP. I reside in Leeds. The parcel arrived at my address within a few days, it is a neat looking piece of kit, I had read quite a lot about it on the forums, as I was also very interested in geohot's jailbreak for the PS3 system with 3.55 firmware which is what my original PS3 has installed on it at the moment, I have been looking at the vast amount of videos, regarding how easy this jailbreak, though to be honest I am struggling myself and have sent an email to teensy to enquire why I am having problems getting the X3 to work correctly on my laptop, I have gone through the tutorials online, and have successfully transferred the bin flash file to the X3, but I cannot find the hex files and so on, if I cannot find them, I cannot update the hex files to do the jailbreak on my PS3, they should reply ina matter of a couple of day's.
I also want to know if the X3 can be used as an ordinary flash drive, because at the moment, when I do plug the X3 into my laptop, I right click on the start menu(Vista home basic pc) and choose explore I cannot see the usb drive at all, it is the same thing when I plug the X3 into my PS3, anyone else having any problems or errors with these units.
Regards
|
|
Advertisement
|
|
|
Junior Member
|
18. January 2011 @ 03:08 |
Link to this message
|
Actually , every jailbreak it similar,PS3 break , P3Go , E3 card are all available. Just make sure don't buy from a untrustworthy site!
This message has been edited since posting. Last time this message was edited on 18. January 2011 @ 03:12
|
