My problem is that I can't see the Bios screen when I tried to connect via hdmi in my monitor!!! This is my first built! Also I have observed a red light (led) in my motherboard which is near the CPU . Any help-recommendation would be highly appreciated. Thanks, Furnos.
No one can really help you from here. You have something physically wrong and the possibilities are near limitless. A jumper setting is wrong or something isn't seated correctly. I will assume all the hardware is correct. Maybe there is a mom & pop computer store near you. Have them set it up. It shouldn't cost you too much more than $50. Someone that does a few a day can figure it out in a few minutes but you might never get it right. That is much smarter than frying something.
Originally posted by Mez: No one can really help you from here. You have something physically wrong and the possibilities are near limitless. A jumper setting is wrong or something isnt seated correctly. I will assume all the hardware is correct. Maybe there is a mom & pop computer store near you. Have them set it up. It shouldnt cost you too much more than $50. Someone that does a few a day can figure it out in a few minutes but you might never get it right. That is much smarter than frying something.
Yep you are wright. One small question though, If the cpu doesnt work properly, then the bios cant load? I mean , to have the bios screen loaded, is cpu a dominant factor? ( Yes I know that the cpu is the most vital hardware in the pc ) . Thanks!
More importantly, you reduce the possibility of frying something. Frying is not covered by any warrentee any more than hitting it with a hammer. It is more common than you think. It is probably the most common cause of returns.
Lastly, you don't hear any beeping? If there is beeping it might be your video. There is a set number of beeps for different problems. I don't remeber the code but you can look it up. No vidio no display no bios display or do you see something? Double check your memory. Make sure they are seated properly and put in the right slots.
Originally posted by Mez: More importantly, you reduce the possibility of frying something. Frying is not covered by any warrentee any more than hitting it with a hammer. It is more common than you think. It is probably the most common cause of returns.
Lastly, you don't hear any beeping? If there is beeping it might be your video. There is a set number of beeps for different problems. I don't remeber the code but you can look it up. No vidio no display no bios display or do you see something? Double check your memory. Make sure they are seated properly and put in the right slots.
Thanks Mez , whenever I tried to connect the hdmi (through video card installed in the motherboard) to my samsung tv I see that something has connected but nothing visual (= no Bios) . Btw, I think that at the first time we tried to power on the system, we noticed a burning smell but it wasn't intensive and we thought it was normal as it was fist ever time that our parts had received electricity!!! Do you think that this is the culprit? At least , we thought we have configured correctly ,so what may have caused this?
