hello,
i kinda a need help on how to burn a game for xbox 360... i have cracked my console.. and its a ntsc console....
i read the steps to burn a game..
The steps are as follow:
Requirements To Burn & Play:
1x DVD+R Dual Layer Burner (Capable of book changing)
1+ DVD+R DL CDS (Recommended: Verbatim Or Aone)
1x Firmware Flashed Or Chipped 360 (Recommended: IXtreme Latest Flash)
1x ImgBurn (Latest)
1+ Xbox 360 PAL = Europe, NTSC = North America, Region Free = Any console, ISO + DVD File (you can make your own dvd file, look at question 1).
1x Brain
Quick Notes:
DVD-R DL will not work as Layer Break is required, DVD-R DL doesnt have the feature to select Layer Break.
ISOS/GAMES/ROMS can be found in various torrent sites, (torrentz.com, piratebay.org)
Burning Speed should be between 2.4x - 4x, i burn at 4x on DVD+R DL Aone discs and they work perfect)
BURNING TUTORIAL
STEP 0:
Insert Blank DVD+R DL Disc into your drive
STEP 1:
Make sure you have all the requirements and have your iso + dvd ALONE in a folder
STEP 2:
Open up ImgBurn then click on Write Image File To Disc, click on the icon with the folder + magnifying glass
and open up your DVD FILE.
Step 3:
Change write speed to 2.4x or 4x (4x works for me)
Step 4:
make sure Test Mode and Verify are not ticked
Step 5:
Make sure destination says your DVD writers name and the writer that your disc is in and not some printer or whatever
Step 6:
Click the open book at the bottom right of imgburn
Step 7:
Find the name of the company that provided your burner, TSST is samsung btw.
Step 8:
Once youve clicked on the company, click Change For: and select DVD+R DL
Step 9:
NEW SETTING: DVD-ROM, click on change, itll say SUCCESS! then click OK
USer Specified : 1913760 > OK (this will set it permanantly but you might want to double check every time)
Step 11:
Make sure all steps are covered, Verify and Test Mode are unchecked, Copies is set to 1 and Write Speed is either 2.4x (40+ mins) or 4x (20+ mins)
Step 12:
Click on that big icon below Verify and test mode of a document disc with an arrow next to it pointing to a disc, it means WRITE!
Step 13:
Wait for disc to finish burning, once finished, exit imgburn then eject disc.
now the problem is:
i followed the above steps...
everything goes fine, disc gets burn succesfully. But when i insert the disc in my console..it first displays reading then open tray option and nothing happens...i m stuck at this point..... pls help me out........
