|
|
|
sony dru-510a won't burn
|
|
|
emenon1
Newbie
|
16. January 2005 @ 20:33 |
Link to this message
|
|
i'm having difficulty burning anything with my new dru-530a burner. right now there are 2 drives in the comptuer, both on the same IDE connection. the other drive is an optorite 5205 cd-rw. both have the lastest firmware updates and i have tried both as master and the other as slave and also both on cable select. none of these configurations work. neither drive can burn unless i take the other one out. i have also tried the latest nero and the lastest sonic record now to see if the software was the problem. it is not the cable bc i have used it before with 2 drives and it both still work as long as they are the only drive. both are detected by the bios and both can read correctly, the only problem is burning. the motherboard also has the lastest bios, it is an abit nf7-s ver. 2.0. thanks.
This message has been edited since posting. Last time this message was edited on 18. January 2005 @ 16:27
|
|
Advertisement
|
 |
|
|
|
johns3304
Suspended due to non-functional email address
|
17. January 2005 @ 16:13 |
Link to this message
|
|
Um, are you sure you mean 510a? The new Sony's for late 2004 and Jan 2005 are Sony DRU-710a. I might not come back to this thread because of a trip I might take... but if you could describe what happens when you can't burn it might help others figure it out.
|
|
emenon1
Newbie
|
17. January 2005 @ 21:33 |
Link to this message
|
|
this is what happens when i try to burn. the drive spins up and starts to write to the media. then only a few seconds in it stops with an error and the entire computer freezes for about 4 or 5 seconds. then it unfreezes for a few seconds and then freezes again. that freezing and unfreezing continues until i shutdown my computer or if i end nero and imapi.exe through the task manager everything will go back to normal but that doesn't work everytime. the same thing happens with the optorite drive and it happens with both music and data. i haven't tried to burn a dvd yet so i don't know how that would work but i can imagine it wouldn't be good. also even though it briefly shows its writing to the cd it doesn't actually do anything to it. and another note, the drive never spins down, it just keeps spinning and won't eject either.
i don't know what this is worth but here is the log created by nero.
BAKER
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.3
Recorder: <SONY DVD RW DRU-530A> Version: 2.1c - HA 1 TA 0 - 6.3.0.3
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1c - HA 1 TA 0 - 6.3.0.3
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-530A 2.1c nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : OPTORITECD-RW CW5205 220E nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
OPTORITE CD-RW CW5205 F: CDRom1
SONY DVD RW DRU-530A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 173MB (177972kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.1.2005
CD-ROM (ISO)
2:30:49 AM #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:30:49 AM #2 Text 0 File Reader.cpp, Line 118
Reader running
2:30:49 AM #3 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-530A running
2:30:49 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
2:30:50 AM #5 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using CD-R/RW media
2:30:50 AM #6 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 276410 ( 61:27.35)
2:30:50 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
2:30:50 AM #8 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: SONY DVD RW DRU-530A;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
2:30:50 AM #9 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:30:50 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 276411 (276411) = #276411/61:25.36
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 276411 blocks [SONY DVD RW DRU-530A ]
--------------------------------------------------------------
2:30:50 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY DVD RW DRU-530A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 566396928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
276411 | lead-out | 1 | 0x00 | 0x41
2:30:50 AM #12 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started
2:30:50 AM #13 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
2:30:50 AM #14 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed
2:30:50 AM #15 Phase 32 File dlgbrnst.cpp, Line 1800
Simulation started at 40x (6,000 KB/s)
2:30:50 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:30:50 AM #17 Text 0 File Mmc.cpp, Line 14883
StartDAO : CD-Text - Off
2:30:50 AM #18 Text 0 File Mmc.cpp, Line 19487
Set BUFE: Power-Burn -> OFF
2:30:50 AM #19 Text 0 File Mmc.cpp, Line 15170
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 3d 1b 24
2:30:59 AM #20 SCSI -500 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x036F0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
2:30:59 AM #21 CDR -500 File Writer.cpp, Line 301
SCSI command aborted
SONY DVD RW DRU-530A\H1 T0
2:31:03 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:31:03 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
2:31:03 AM #24 SCSI -1065 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
2:31:03 AM #25 CDR -1065 File WriterStatus.cpp, Line 164
Invalid command
2:31:03 AM #26 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
2:31:03 AM #27 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
2:31:03 AM #28 Phase 34 File dlgbrnst.cpp, Line 1800
Simulation failed at 40x (6,000 KB/s)
2:31:13 AM #29 SCSI -1169 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 18. January 2005 @ 16:27
|
|
emenon1
Newbie
|
17. January 2005 @ 21:37 |
Link to this message
|
|
just a couple side notes about the log.
yes i know that i have simulation turned on, that was how i was able to get the log without the computer freezing. i know i'm not using the latest version of nero that is because i tried reinstalling it and haven't gotten around to updating yet, but the SAME thing happens with the new version. if i need to update and create another log i'd be happy to, just let me know.
This message has been edited since posting. Last time this message was edited on 18. January 2005 @ 16:26
|
|
colw
Senior Member
|
18. January 2005 @ 00:31 |
Link to this message
|
|
It would help if you enabled DMA mode on your burner.
_________________________________________________________________________________
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-530A 2.1c nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : OPTORITECD-RW CW5205 220E nvidesm Port 0 ID 1 DMA: Off
_________________________________________________________________________________
|
|
emenon1
Newbie
|
18. January 2005 @ 03:25 |
Link to this message
|
|
ok, i wasn't sure how to enable DMA so i checked a couple places. i looked in the drive's properties in windows and that led to nothing. then i went into my BIOS and the Ultra DMA option for all of my drives has 2 options, disable or auto, and they are all on auto. i enabled Bus Mastering to see what that would do and had the same results as b4, same log. i don't know what PIO mode is but there was an option to change that between 5 different modes, mode 1 through mode 5.
This message has been edited since posting. Last time this message was edited on 18. January 2005 @ 16:26
|
|
Advertisement
|
|
|
|
emenon1
Newbie
|
18. January 2005 @ 16:24 |
Link to this message
|
thought this may help a little, this is the log from Nero when it successfully burns with only the sony drive. notice DMA is off but it still burns without a problem.
BAKER
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.3
Recorder: <SONY DVD RW DRU-530A> Version: 2.1c - HA 1 TA 0 - 6.3.0.3
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1c - HA 1 TA 0 - 6.3.0.3
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-530A 2.1c nvidesm Port 0 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-530A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 342MB (350236kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.1.2005
CD-ROM (ISO)
9:20:17 PM #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:20:17 PM #2 Phase 94 File dlgbrnst.cpp, Line 1800
Power-Burn activated
9:20:17 PM #3 Text 0 File Reader.cpp, Line 118
Reader running
9:20:17 PM #4 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-530A running
9:20:17 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
9:20:17 PM #6 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using CD-R/RW media
9:20:17 PM #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 202481 ( 45:01.56)
9:20:17 PM #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
9:20:17 PM #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: SONY DVD RW DRU-530A;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
9:20:17 PM #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:20:17 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 202482 (202482) = #202482/44:59.57
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 202482 blocks [SONY DVD RW DRU-530A ]
--------------------------------------------------------------
9:20:17 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY DVD RW DRU-530A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 414990336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
202482 | lead-out | 1 | 0x00 | 0x41
9:20:17 PM #13 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started
9:20:17 PM #14 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
9:20:17 PM #15 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed
9:20:17 PM #16 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 40x (6,000 KB/s)
9:20:17 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:20:17 PM #18 Text 0 File Mmc.cpp, Line 14883
StartDAO : CD-Text - Off
9:20:17 PM #19 Text 0 File Mmc.cpp, Line 19487
Set BUFE: Power-Burn -> ON
9:20:17 PM #20 Text 0 File Mmc.cpp, Line 15170
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 2d 01 39
9:22:23 PM #21 Text 0 File WriterStatus.cpp, Line 115
<SONY DVD RW DRU-530A > start writing Lead-Out at LBA 202482 (316F2h), lenght 0 blocks
9:22:32 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:22:32 PM #23 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
9:22:32 PM #24 Phase 37 File dlgbrnst.cpp, Line 1800
Burn process completed successfully at 40x (6,000 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
