|
green squares/screen on all dvds
|
|
|
94s10
Newbie
|
15. February 2005 @ 08:52 |
Link to this message
|
ive been trying to burn some dvds and ive had no luck at all. i cant figure out why though. i tried both a downloaded movie and a dvd i own and had the same results. ive used nero, dvd decrypter, dvd shrink, dvd x copy....and i get all the same results. here's a pic of what all the burns come out to be
the dvd will start to play and looks like that, the sound is choppy and the player then freezes. it happens in windows media player, power dvd and on a home dvd player. ive tried a verbatim, memorex, and liteon media + and -. ive even tried a different dvd burner(plextor px716a and lite on sohw-1633s06c) and still got the same results. so now im stumped. anyone have any suggestions?
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
15. February 2005 @ 14:11 |
Link to this message
|
|
Here are a few things that could possibly cause that problem.
1. Over compressing the movie to fit the blank media.
2. Cheap/poor quality blank media.
3. Stick on paper labels.
4. Burning the dvd faster than 4x speed.
5. Multi-tasking or web browsing while burning.
6. IDE channels in PIO mode instead of DMA causing very slow data transfer.
7. Possible defective equipment.
8. Programs running in the backgroung -AntiVirus etc.
Thats a few off the top of my head. Hope this helps.
Jerry
This message has been edited since posting. Last time this message was edited on 15. February 2005 @ 14:11
|
Moderator
|
16. February 2005 @ 03:14 |
Link to this message
|
|
i've seen that quite a bit on downloaded movies/music vid clips (ie on the downloaded file itself). But if it's happening when dvd copying see previous post by Jerry
Rich
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
94s10
Newbie
|
16. February 2005 @ 05:41 |
Link to this message
|
|
i figured it out....it was something with the ide cables. i had to put that drive on a cable by itself, im not sure why though....it just worked after that. i also think, something with my seperate dvd drive had something to do with it.
but it works now.....so thanks anyways.
|
|
babelfish
Senior Member
|
16. February 2005 @ 05:57 |
Link to this message
|
|
hmmmm - really you want all IDE devices on seperate cables - for example if you have a raided/extended IDE mobo then you can have upto 4 IDE devices on seperate cables - something to do with the IDE controller having better control over devices etc...
|
AfterDawn Addict
|
16. February 2005 @ 07:16 |
Link to this message
|
|
hi
if you set the jumpers correctly on the back of the drives it should be ok! i have 2 cables with 2 drives on each! 1 is a 160gig HD the other 3 are cd/dvd/rw drives
as i have raid connections for my twin hard drives, so i have 6 things connected alltogether...
Nothing here to see, move along folks.
 |
|
Whisperer
Senior Member
|
16. February 2005 @ 10:05 |
Link to this message
|
|
Jerry746
Good list of variables but you forgot the big one: a scratched original can be ripped by many programs but the backup will play with blocky pixellation.
Best regards
Whisperer
|
|
ScubaBud
AfterDawn Addict
|
16. February 2005 @ 10:41 |
Link to this message
|
|
Rotary
Ya got enough stuff packed in that PC of yours or what?!?!?! <G>
|
|
Advertisement
|
|
|
|
CKY_2084
Suspended due to non-functional email address
|
16. February 2005 @ 17:19 |
Link to this message
|
Yeah
Quote:
ROTARY YOU STOLE MY SIG GIVE IT BACK!
|
