|
The Official OC (OverClocking) Thread!
|
|
|
NO Fanboy comments needed
|
Member
|
4. March 2005 @ 18:16 |
Link to this message
|
|
madgreek celerons has always been great overclock in the past a 333mhz celereon could go up to 500-600mhz imagine that from 2.4 to 3.2 is great jump and at that temp is great!!! dont be greedy jejejeje
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
Advertisement
|
 |
|
|
|
madgreek
Suspended permanently
|
5. March 2005 @ 03:19 |
Link to this message
|
I know. I tried eveything last night I can't get it to go any higher. I played rise of nations for like 6 hours so i know its a stable overclock. I also burned 6 dvd's with DVD Shrink and Nero so its good. I have a gig of 2700 ram in there now. I am going to add one more stick and be done with the computer. My next project will be to see what I can do with a celeron d 2.93. There is some great overclocking potential there.
|
|
tryhard
Suspended due to non-functional email address
|
5. March 2005 @ 06:30 |
Link to this message
|
|
hi everybody i push my machine yesterday a litle bit more an i oc my v card bad lol but everything wase ok the temp wase good and its sure is stable i play doom3 (very hight graph quality)for 2 or 3 hours and i didnt crash and heat up so mayby im in the good way see ya all
amd athlon 2800+xp ov to 2186mhz nut finish to ov yet:op
1024 ddR ram
bfg tech chip set nvidia 5700le ov 256mg
|
|
madgreek
Suspended permanently
|
5. March 2005 @ 06:43 |
Link to this message
|
|
Did u use coolbits?
|
|
tryhard
Suspended due to non-functional email address
|
5. March 2005 @ 14:28 |
Link to this message
|
|
nope what is it???
amd athlon 2800+xp ov to 2186mhz nut finish to ov yet:op
1024 ddR ram
bfg tech chip set nvidia 5700le ov 256mg
|
|
tryhard
Suspended due to non-functional email address
|
5. March 2005 @ 14:42 |
Link to this message
|
|
ok i check for coolbits but no i use riva tuner for oc my card is coolbits better
amd athlon 2800+xp ov to 2186mhz nut finish to ov yet:op
1024 ddR ram
bfg tech chip set nvidia 5700le ov 256mg
|
|
angusman
Inactive
|
7. March 2005 @ 23:29 |
Link to this message
|
|
hey does the creative labs PMC portable media center play mpeg1 encoded with DVDx 2.2
|
|
madgreek
Suspended permanently
|
8. March 2005 @ 05:04 |
Link to this message
|
|
Anyone do any sempron overclocking???
|
|
nohelpme
Senior Member
|
17. March 2005 @ 09:37 |
Link to this message
|
|
hgfhgfhfgh
|
|
Decrypto
Inactive
|
22. March 2005 @ 00:55 |
Link to this message
|
|
is anyone here using the thermaltake big-water or similar water cooling systems?
or are they a bit of an over kill?
|
|
gmill002
Newbie
|
30. March 2005 @ 20:58 |
Link to this message
|
|
I was guiding my little brother through overclocking his Sempron 200 over the net, and upon hitting apply in SuperStep (the MoBo utility), the screen went fuzzy and an alarm went off. I got him to switch it off and reset the CMOS, an have not been game to overclock since. Now he tells me the system reboots itself randomly a couple of times per day.
He overclocked it from 166hz to 221hz when it fuzzed out.
any clues as to if there is damage to the chip?
It runs consistently at 36 degrees c.
Sempron 2200
Winfast K7S41MG-6L
768mb Generic DDR400 2700 ram
350w PSU
|
Member
|
31. March 2005 @ 12:59 |
Link to this message
|
|
well gmill if it boots is ok. semprons are good overclockers with less heat than xp try not going that far again
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
AZcustom
Newbie
|
7. April 2005 @ 02:06 |
Link to this message
|
|
Hullo there. I built a system recently for a friend, a gamer system, and when setting it up, I didn't notice any problems. A week went by and just when I thought it was home safe and sound, he called me to tell me it's overheating. I at first suspected the case. It's one of the " Demon" cases, black with red LED's, about fifty bucks pretty much anywhere. It's an athlon XP 3200, the 400mhz core, running at stock speed, 2 sticks of Geil gold 512MB PC3200 Dual Channel, running in dual channel mode on an Abit NF7-S 2.0 motherboard. Maxtor 60GB Sata HD. Geforce 5500 256mb Video Card. He chose the video card from one of his older systems, I didn't get it for him. Last system I built I threw a Sapphire Radeon X800XT Platinum into the thing, out the box nearly 14k on 3dMark 04.
He says to me, "it overheats". I told him where to DL a program from Asus that monitors his CPU / MB temps, and sure enough, its hotter than a firecracker.
It locks up and/or reboots during heavy load. I have tried several things, at first thinking it was the board, then suspecting the ram. I have tried bumping it back to single-channel mode on the RAM, played with the latencies, upgraded the BIOS, and I cannot get the temp to drop enough to make it playable. I have replaced the stock fan with a Thermaltake Volcano 10, with Arctic Silver 2 compound, to no avail. Could it just be a bad proc? Or is there something I have not yet tried? I'm at my wits end, it should be a sweet system, but it's giving me nightmares....
AZCustom -
This message has been edited since posting. Last time this message was edited on 7. April 2005 @ 02:15
|
|
ppiper
Junior Member
|
7. April 2005 @ 06:44 |
Link to this message
|
|
it sounds like u know what your doing i would take off heatsink and clean it real good with 99% alcohol and make sure u dont have any fingerprints or hairs on it and i use arctic silver 5. if you r putting to much or too less artic silver then your temps r gonna suck. i use artic silver 5 with a xp-90 and a loud tornado fan on my amd 64 3500 with a total of 6 fans wich =COOL make sure u have more air BLOWING OUT than in or equal air flow through the case u want all that hot air blowing out of your case. if it ran good for a week and then took a dive it could be more than one issue i would do the heatsink/fan/cpu cleaning /reappling first then if that dont work id check each part one at time next the ram then psu etc. run memtest86 and make sure u have your bios configured right. and also after i burned in my gskill ram they did perform better ,i used to believe that burning in the ram didnt work but it does for me.
|
Member
|
7. April 2005 @ 12:13 |
Link to this message
|
|
hello azcustom that a nice gamer system.
ok first where you reading your temps from? compare the temps from your bios and any windows application the bios is the most accurate.
some mobos has bugs in bios sensors there are bios updates for temps reading problems.
do this:
1-check airflow thru the case (small cases hold more the warm air).
2-try to get from abit.com the bios update for temps reading issues
what temps are you reading?
3-reseat your heatsink and correctly applay artic silver 5 (highly recommend it).
4-READ temps from both bios and abiteq application
let me know?
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
AZcustom
Newbie
|
7. April 2005 @ 21:37 |
Link to this message
|
|
I'm ordering another motherboard for that Athlon XP nightmare system.. Also gonna go with a little less restrictive case.. Will post my findings.
AZCustom
|
|
bakasamaz
Newbie
|
11. April 2005 @ 17:06 |
Link to this message
|
can someone help me. i OC'ed my x800 pro vivo to xt Pe, but somehow some blackspots / squares appearing on some 3d applications and game. those applications and games that affected are: doom3 and 3dmark05.
Not all tests on 3dmark05 affected, but only one affected. That is the 3rd test: Water Dragon and a flying Vehicle.
here are some snapshots i took:
http://www.geocities.com/audighozalli@sbcglobal.net/blkspots.JPG
http://www.geocities.com/audighozalli@sbcglobal.net/blckspts.JPG
please someone help me out. i tried everything i could but nothing can solve this problem. one time i tried to flash back to x800 pro vivo and the black spots/squares still appearing on those application and game.
thankyou
|
|
CruiserX
Newbie
|
18. April 2005 @ 05:01 |
Link to this message
|
|
I was wondering whether I could possibly take my CPU higher by overclocking. Below are my system's specs. Thanks in advance for any suggestions.
EPOX EP-3RDA+ nforce 2 ultra 400 (SPP)MB
ATHLON XP 3000+ (running @ 2310 Mhz -10.5x225 1.65V)
2x TakeMs 256 DDRAM PC3200 400FSB, DualChannel
Galaxy Geforce FX 5500 70 Core/400 Memory,OC: 308/438
2x Western Digital 80JD Raid O, CDRW ETC.
|
Member
|
19. April 2005 @ 12:02 |
Link to this message
|
|
hello cruiserx of course you can you have the proper hardware to do so!.
there are to ways for overclocking a cpu(i dont know if you are new to this or you already know in that case don`t read this jejeje).
1-increasing the fsb:
your athlon 3000+ has a 400mhz fsb (as i read in your sig)
200 internal bus.
you can increase your fsb by 1mhz at time or a little bit more(like 5mhz or 10mhz) until you get the highest and stable settings.
2-changin multiplier:
your xp3000+ runs on a barton core which is lock so you wont be able to change that :(.
3-vcore:
your xp3000+ vcore 1.65v you can increase it in 0.25v(1.65,1.7,1.725 and so on) try not to overpass the 1.85v.
why increase vcore?? to cope with higher fsb more performance more power is need it!!.
and last but not least:
cooling overclocking makes your cpu produce more heat especially vcore increase!! amd says that over 85 degrees celcius is xp fry temp! so you need extra cooling like a couple of case fans,and a bigger or better heatsinkfan (copper is the best material) in order to keep your cpu under 50Cº celcius...
about memory your mem is ddr 400mhz so it should do well with your cpu that runs on 400 fsb set the cpu fsb/ddr ratio 1/1.
and use tight memory timings 6-3-3-2.5t(some generic brand memorys wont let you use small timings values).
hope i help..
let me know.
``overclocking is not about numbers...
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
CruiserX
Newbie
|
20. April 2005 @ 04:56 |
Link to this message
|
|
Thanks a lot for the suggestions. As you can see, I have already overclocked the CPU. Its default frequency is 2100 Mhz and now it is running, at over 2300 with an increase of 25 in the FSB. But that's as far as I can get. Even with increased voltage, after a time the system crashes. I managed to boot at almost 2500 Mhz, with increased voltage, but Windows XP eventually crashed. So, I guess that's the limit for my system.
EPOX EP-3RDA+ nforce 2 ultra 400 (SPP)MB
ATHLON XP 3000+ (running @ 2310 Mhz -10.5x225 1.65V)
2x TakeMs 256 DDRAM PC3200 400FSB, DualChannel
Galaxy Geforce FX 5500 70 Core/400 Memory,OC: 308/438
2x Western Digital 80JD Raid O, CDRW ETC.
|
Member
|
20. April 2005 @ 05:46 |
Link to this message
|
|
ok as i said you push it until it crash to kn ow your system limits every cpu is different when you overclock.
most people recomend 25% or maybe 30% of cpu capacity.
so if your syst. at 2.3 or 2.4 performs good or theres no difference you should leave it at stock values or just a little jump..
xp`s 2800-3200 are not good for xtreme overclocking like older ones like 1800,2200,2400 and the best of all the 2500+ barton.
let check this:
1-what temps are you reading? at 2.5 or 2.4
2-your memory settings,timings fsb/ddr ratio?
3-what vcore values did you use?
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
striker68
Suspended permanently
|
20. April 2005 @ 08:20 |
Link to this message
|
|
Has anyone here overclocked a Sempron. I have a 3000+ running at 2000 but would like to overclock.
|
Member
|
20. April 2005 @ 14:28 |
Link to this message
|
|
is your sempron socket a(462) or 754??
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
striker68
Suspended permanently
|
20. April 2005 @ 15:09 |
Link to this message
|
|
socket A
AMD Sempron 3000+ (barton)OC'd to 200FSB@ 2400MHZ
ATI Radeon 9550 OC'd with CoolerMaster VGA cooler
MSI K7N2 Delta2 mobo
Volcano 12
1024 CorsairXMS DDR400 PC3200
|
|
Advertisement
|
|
|
|
CruiserX
Newbie
|
21. April 2005 @ 02:23 |
Link to this message
|
|
Well. Right now, the settings are as follows:
FSB: 220, multiplier 10.5 (my xp3000+ has a default fsb of 200)
CPU Voltage: 1.675 (the default was 1.65v, had to increase it to keep the system stable)
RAM: timings: 6,3,3,2.5, Memory FSB: 220
Temperature reading: 47-49 deg in stand-by, 55-56 deg full load.
I have a TITAN 10 $ cooler on the CPU.
That's all I can tell you for now.
EPOX EP-3RDA+ nforce 2 ultra 400 (SPP)MB
ATHLON XP 3000+ (running @ 2310 Mhz -10.5x225 1.65V)
2x TakeMs 256 DDRAM PC3200 400FSB, DualChannel
Galaxy Geforce FX 5500 70 Core/400 Memory,OC: 308/438
2x Western Digital 80JD Raid O, CDRW ETC.
|
