|
100MB/s connection to gamecube dont work, crashes.
|
|
Senior Member
6 product reviews
|
16. February 2005 @ 11:58 |
Link to this message
|
|
So, when i'm streaming game to gamecube with GC-Sim (that has 100MB/s support), it loads, and before game menus will show up, gamecube just boots. with 10MB/s it works, but lags:(
What settings i have to put that 100MB/s will work? i have Smartlink 10/100MB NIC and fast enough computer that it could work(1GHz,256RAM)
what settings to enable etc. in PSO and NIC configuration?
and what is suggested delay/frequency/cache?
by the way, in phoenix, can choose cache 1-100, but gamecube has RAM only 24MB...
The future is not set. Theres no fate but that which we make for ourselves.
Oon Consoleforumsin mysticy, PS2-Scenen MysTiCy ja Maxconsolen toad86.
Modailen PS2, Wii, Gamecube, Nintendo DS. Porissa. Asentelen jälleen FreeMCBootia :)
Super Nintoaster! :D https://sites.google.com/site/markosstuff/super-nintoaster
|
|
Advertisement
|
 |
|
|
|
tempest9
Junior Member
|
16. February 2005 @ 12:31 |
Link to this message
|
|
What are you using to load the dol?
I run at 100Mbps using SDload and GCSIMpreviewrepack. Do not use SDIPDATA.CFG, I delete it completly off SD card to be sure, but you should be able to edit ON to OFF. Start up s3-gcsim.exe on PC select ISO, wait for HDD activity to stop and then start up s3-gcsim.dol on the cube. Now initialization errors 9 times out of 10.
To cut down on Xs I have max speed down to 16-20. Intro scenes are choppy, but game play is fine.
Good Luck
Gamecube: NTSC DOL-001 REV A - BIOS Rev 1.1 - Drive Model 04 2002/02 (61) - LaserPot = 183 ohms now tweaked to ~150
Mod Chip: XENOGC
Soft Mods(replaced by xenoGC, but still useful!): BBA, AR 1.07, SD Adapter, Samson's Loader Mem Card - GcoM2.3 for ripping
Burner/Media: NEC2100 (flashed to 2510) / Office Depot mini, Teon full size
|
|
Icemonkey
Senior Member
|
16. February 2005 @ 14:35 |
Link to this message
|
|
Try a Netgear of 3Com NIC if you have one available. Is your NIC an onboard model? If so it's probably not reliable.
PS2 - v8
Mod - Magic V
Burner - CenDyne (Pioneer) DVR-A05
Media - Anything Cheap
Gamecube w/Broadband Adapter
Phantasy Star Online
Animal Crossing Loader v1.4
Phantasy Star Uploader v1.1
Gamecube ISO Ripping Server v1.0.0.29 |
Senior Member
6 product reviews
|
17. February 2005 @ 04:03 |
Link to this message
|
Quote:
To cut down on Xs I have max speed down to 16-20.
how i change that?
Quote:
I run at 100Mbps using SDload and GCSIMpreviewrepack.
will SDload work with PSO too?, is'nt SDload to SD-card-thing too? and if it works with PSO, is it better than PSUL or PSOload, and how?
The future is not set. Theres no fate but that which we make for ourselves.
Oon Consoleforumsin mysticy, PS2-Scenen MysTiCy ja Maxconsolen toad86.
Modailen PS2, Wii, Gamecube, Nintendo DS. Porissa. Asentelen jälleen FreeMCBootia :)
Super Nintoaster! :D https://sites.google.com/site/markosstuff/super-nintoaster
|
|
tempest9
Junior Member
|
17. February 2005 @ 04:36 |
Link to this message
|
|
Q1:
Open s3-gcsim.dat with a text editor (ex notepad).
Follow instructions in the file.
Q2:
With SDload you do not need PSO, AT ALL!
s3-gcsim.dol initializes the BBA at 100Mbps.
Good Luck!
Gamecube: NTSC DOL-001 REV A - BIOS Rev 1.1 - Drive Model 04 2002/02 (61) - LaserPot = 183 ohms now tweaked to ~150
Mod Chip: XENOGC
Soft Mods(replaced by xenoGC, but still useful!): BBA, AR 1.07, SD Adapter, Samson's Loader Mem Card - GcoM2.3 for ripping
Burner/Media: NEC2100 (flashed to 2510) / Office Depot mini, Teon full size
|
Senior Member
6 product reviews
|
17. February 2005 @ 04:54 |
Link to this message
|
|
i found a GC-sim GUI, and there's that max speed setting=)
The future is not set. Theres no fate but that which we make for ourselves.
Oon Consoleforumsin mysticy, PS2-Scenen MysTiCy ja Maxconsolen toad86.
Modailen PS2, Wii, Gamecube, Nintendo DS. Porissa. Asentelen jälleen FreeMCBootia :)
Super Nintoaster! :D https://sites.google.com/site/markosstuff/super-nintoaster
|
Senior Member
6 product reviews
|
17. February 2005 @ 05:43 |
Link to this message
|
Quote:
With SDload you do not need PSO, AT ALL!
how i do that?, i downloaded SDload and there was that i need a SD card, and i dont have that.
but by the way, i had a thought that if download those SD-files to regular memory card throught PSO, then when the files are in card, it acts like a SD card, and then is no need to PSO because in boot comes a menu.
could that work? and if, how? is it done already?
The future is not set. Theres no fate but that which we make for ourselves.
Oon Consoleforumsin mysticy, PS2-Scenen MysTiCy ja Maxconsolen toad86.
Modailen PS2, Wii, Gamecube, Nintendo DS. Porissa. Asentelen jälleen FreeMCBootia :)
Super Nintoaster! :D https://sites.google.com/site/markosstuff/super-nintoaster
|
Senior Member
6 product reviews
|
17. February 2005 @ 07:10 |
Link to this message
|
|
I tried to stream game to GC with that GCSim-gui, but on Starcube screen, there comes "Detecting network settings..." then comes "INITIALIZATION ERROR"
what can be reason to it?
The future is not set. Theres no fate but that which we make for ourselves.
Oon Consoleforumsin mysticy, PS2-Scenen MysTiCy ja Maxconsolen toad86.
Modailen PS2, Wii, Gamecube, Nintendo DS. Porissa. Asentelen jälleen FreeMCBootia :)
Super Nintoaster! :D https://sites.google.com/site/markosstuff/super-nintoaster
|
|
tempest9
Junior Member
|
17. February 2005 @ 09:29 |
Link to this message
|
|
I have not gotten the GUI version to work, pretty sure some of the defaults are wrong (port #, etc) at least for me.
As far as I know, an SD card and adapter are needed to run SDload.
Gamecube: NTSC DOL-001 REV A - BIOS Rev 1.1 - Drive Model 04 2002/02 (61) - LaserPot = 183 ohms now tweaked to ~150
Mod Chip: XENOGC
Soft Mods(replaced by xenoGC, but still useful!): BBA, AR 1.07, SD Adapter, Samson's Loader Mem Card - GcoM2.3 for ripping
Burner/Media: NEC2100 (flashed to 2510) / Office Depot mini, Teon full size
|
Senior Member
6 product reviews
|
18. February 2005 @ 01:55 |
Link to this message
|
|
ok, but SDcard works without Pc too, so regular memory card could work too. so, do you know any program that i can upload any data to memory card with PSO+BBA?
The future is not set. Theres no fate but that which we make for ourselves.
Oon Consoleforumsin mysticy, PS2-Scenen MysTiCy ja Maxconsolen toad86.
Modailen PS2, Wii, Gamecube, Nintendo DS. Porissa. Asentelen jälleen FreeMCBootia :)
Super Nintoaster! :D https://sites.google.com/site/markosstuff/super-nintoaster
|
|
tempest9
Junior Member
|
18. February 2005 @ 05:30 |
Link to this message
|
|
uhm no,
When SD card is readied for use the the GC you run a program called SDpatch. Read the info that comes in the SDload zip.
I do not know how or if you could run off a GC memory card.
Gamecube: NTSC DOL-001 REV A - BIOS Rev 1.1 - Drive Model 04 2002/02 (61) - LaserPot = 183 ohms now tweaked to ~150
Mod Chip: XENOGC
Soft Mods(replaced by xenoGC, but still useful!): BBA, AR 1.07, SD Adapter, Samson's Loader Mem Card - GcoM2.3 for ripping
Burner/Media: NEC2100 (flashed to 2510) / Office Depot mini, Teon full size
|
|
Icemonkey
Senior Member
|
18. February 2005 @ 18:18 |
Link to this message
|
|
Initialization Error occurs when an unsupport NIC is being used to stream from the PC to the Gamecube. Try a 3Com or a Netgear NIC and see if that solves the problem.
PS2 - v8
Mod - Magic V
Burner - CenDyne (Pioneer) DVR-A05
Media - Anything Cheap
Gamecube w/Broadband Adapter
Phantasy Star Online
Animal Crossing Loader v1.4
Phantasy Star Uploader v1.1
Gamecube ISO Ripping Server v1.0.0.29
|
Senior Member
6 product reviews
|
18. February 2005 @ 23:18 |
Link to this message
|
|
this afterdawn goes offline often, and my previous message seems have been vanished somehow:(
but when i tried again gcsim gui, there did'nt came initialization error, it seems to come sometimes and sometimes not.
problem after problem... when i got 100MB/s to work, it was only streaming about 5MB/s, and i thought that it was because i have tweaked my windows net settings etc. and windows was besides slow(unformatted 1 year) then i formatted and installed windows again. then, Phoenix did'nt work when i installed it again. when i doubleklick to phoenix, it does nothing. is there any file that is needed that it works?
The future is not set. Theres no fate but that which we make for ourselves.
Oon Consoleforumsin mysticy, PS2-Scenen MysTiCy ja Maxconsolen toad86.
Modailen PS2, Wii, Gamecube, Nintendo DS. Porissa. Asentelen jälleen FreeMCBootia :)
Super Nintoaster! :D https://sites.google.com/site/markosstuff/super-nintoaster
|
|
Advertisement
|
|
|
|
tempest9
Junior Member
|
19. February 2005 @ 07:09 |
Link to this message
|
|
reload an earlier version and then replace the.exe with 2.5 Search forum - his has been discused.
and yes initialization errors can be hit or miss
Unfotunalty for me I am using a laptop and cannot easily change to the NICs recommended by Icemonkey.
<edit>
Actually, I just searched eBay and I could get a 3com to replace my Xircom and miniPCI is easy to swap out! :)
Does the use of a crossover help or hurt?
Gamecube: NTSC DOL-001 REV A - BIOS Rev 1.1 - Drive Model 04 2002/02 (61) - LaserPot = 183 ohms now tweaked to ~150
Mod Chip: XENOGC
Soft Mods(replaced by xenoGC, but still useful!): BBA, AR 1.07, SD Adapter, Samson's Loader Mem Card - GcoM2.3 for ripping
Burner/Media: NEC2100 (flashed to 2510) / Office Depot mini, Teon full size
This message has been edited since posting. Last time this message was edited on 20. February 2005 @ 17:14
|
