|
log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 16:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12
Nero version: 6.6.0.0
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.17 - HA 0 TA 0 - 6.6.0.0
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-ROM DVD-121 >Version: 1.07 - HA 3 TA 0 - 6.6.0.0
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-121 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A E: CDRom0
PIONEER DVD-ROM DVD-121 F: CDRom4
AXV CD/DVD-ROM K: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 147MB (151344kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.2.2005
DVD-Copy on the fly
10:10:56 #1 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2
10:10:56 #2 SCSI -1066 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x036B6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xC9 0x02 0x02 0x01 0x42 0x54 0x59 0x50 0x45 0x01 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:10:56 #3 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2
10:10:56 #4 Text 0 File Reader.cpp, Line 127
Reader running
10:10:56 #5 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2510A running
10:10:56 #6 Text 0 File DVDCopy.cpp, Line 267
DVD Track-Information from source disc
S01 T01 Con 0x04 Start 0 Len 2286112 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
10:10:56 #7 Text 0 File DVDCopy.cpp, Line 370
Max -1 tracks of 1 allowed to copy
1: 0 - 2286112 = 2286112, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
10:10:56 #8 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media
10:10:57 #9 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
10:10:57 #10 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
10:10:57 #11 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
10:10:57 #12 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:10:57 #13 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------
10:10:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
10:10:57 #15 Phase 36 File dlgbrnst.cpp, Line 1861
Burn process started at 8x (11,080 KB/s)
10:10:57 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:10:57 #17 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 7:07,636 (427636ms) -> OK
10:10:57 #18 Text 0 File DVDR.cpp, Line 1955
Recording mode: Sequential Recording Mode
10:10:57 #19 Text 0 File Mmc.cpp, Line 20542
Set BUFE: Buffer underrun protection -> ON
10:10:57 #20 Text 0 File DVDR.cpp, Line 2096
Start write address at LBA 0
DVD high compatibility mode: Yes
10:10:57 #21 Text 0 File Cdrdrv.cpp, Line 8259
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:10:57 #22 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2
10:10:57 #23 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2
10:10:57 #24 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2
10:10:57 #25 Text 0 File DVDR.cpp, Line 4674
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM
10:11:10 #26 Text 0 File Cdrdrv.cpp, Line 1281
10:11:10.437 - _NEC DVD_RW ND-2510A\H0 T0 : Queue again later
10:20:32 #27 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
10:20:32 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:20:33 #29 Text 0 File DVDR.cpp, Line 2338
EndDAO: Last written address was 2286111
10:20:39 #30 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in RAM, command version 2
10:20:39 #31 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in RAM, command version 2
10:20:39 #32 Text 0 File DVDR.cpp, Line 4674
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM
10:20:39 #33 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
10:20:39 #34 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
10:20:39 #35 Phase 37 File dlgbrnst.cpp, Line 1861
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 16:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 27/12/2004 17:33:16 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 04/08/2004 02:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
