|
|
|
Tried installing DVD Drive myself- PROBLEMS....
|
|
|
colin72
Newbie
|
4. March 2005 @ 12:52 |
Link to this message
|
|
I have a HP Pavilion Desktop (9680C), Win 98 SE, 650 Pentium 3, 128 MB RAM.
It came with a CD-rom and a DVD-rom. I just bought a NEC DVD+/-RW ND-3520A. I'm very much a NOVICE but thought I could install the NEC Drive. Following instructions from the HP site, I took the DVD-rom out and replaced it with the new NEC Drive.
The original CD-rom was and still is the master and the NEC is the slave.
M: is the CD-rom
D: is the new NEC
E: is still present and I assume that was my old DVD-rom
In my Device Mgr:
NEC DVD_RW ND-3520A
AXV CD/DVD-ROM
TEAC CD-W54E
If I double click the NEC drive in the Device Mgr, the device status says it's working properly, but it also says:
Device Type: CDROM
Manufacturer: (standard CD-ROM device)
Hardware version: not available
Obviously I screwed this up. Could someone help me out, and remember, I'm a novice.
Thanks
|
|
Advertisement
|
|
|
|
|
ScubaBud
AfterDawn Addict
|
4. March 2005 @ 13:05 |
Link to this message
|
|
colin72
I would have suggested that you first make your new DVD Burner the Master and put back your DVD-Rom drive making it the slave since your DVD Burner will also be what you will use for your CD burning as well. This way when you backup a DVD movie, you can use your DVD-Rom for ripping and your Burner for Burning the blank media. Hopefully your new burner came with a different ribbon cable such as one with a blue end which goes to the MB, a black plug which goes to the master, and a grey plug that goes to your slave.
Edit: "Does not require drivers for Windows 98"
This message has been edited since posting. Last time this message was edited on 4. March 2005 @ 14:10
|
|
colin72
Newbie
|
4. March 2005 @ 13:40 |
Link to this message
|
|
My New NEC Drive did not come with any cables, software, etc (nothing but the drive- I got it online from Newegg).
|
|
ScubaBud
AfterDawn Addict
|
4. March 2005 @ 14:12 |
Link to this message
|
|
I did a search and all I found was drivers for Dos, etc. so it should be fine without anything special. Try the setup I spoke of above and see what happens. I also would look into getting an 80 wire ribbon since this drive could be set to a DMA 4 level which would require the ribbon I mentioned. Normal cables only are good for a max of DMA2.
This message has been edited since posting. Last time this message was edited on 4. March 2005 @ 14:13
|
|
GRCRYSTYK
Newbie
|
4. March 2005 @ 14:37 |
Link to this message
|
|
Hello fellas,...
First post, and first reply on the site. Been doing a lot of reading lately on the subject of DVD burning, and have been seeing alot of info from you Mr. Scuba,...I really enjoy, and appreciate you help,...Thanks,...
About the problem at hand here,..I too have had a starnge event with the same NEC burner. Mine is a bit different however, int he fact, I set mine as the slave, but it has caused my system, P4, XP Pro, to take a veeery long time to load after resart. The drive seems to operate fine after the system is up, but I can't stand to wait so long for the system to come up, and it seems there is obviously something amiss anyway,....I am going to change the jumpers on mine as well, and see how it goes.
I just thought you might find it interesting, that another user is experiencing trouble as well,....Not to mention, the drive was purchased from the same supplier. Maybe they got a bad batch,...??
Glad to be here, and thanks again,....
GRCRY,...>>>--->
|
|
ScubaBud
AfterDawn Addict
|
4. March 2005 @ 14:47 |
Link to this message
|
|
At colin72 & GRCRYSTYK
I don't want to mislead you on that issue of master and slave. It really doesn't matter much anymore which is master or slave, just as long as they are jumpered correctly and on a good IDE cable. I was making this reference since colin72 was setting his up and still using his CD-Rom instead of keeping his DVD-Rom drive. There can also be other issues such as your secondary channel not being on DMA mode, but instead, on PIO. You can check for this in your device manager and see if the secondary controller under ATA/IDE shows DMA or not.
|
AfterDawn Addict
|
4. March 2005 @ 14:53 |
Link to this message
|
|
GRC and colin72: I have my lite-on 167t set as secondary master/benq 1620 set as secondary slave. My H drive set as primary master and I drive set as primary slave.It's working great for me.
GRCry:If your pc is running slow when you boot up try shutting down some of those programs during startup: click run/type in msconfig/ok/ click startup tab/ then you can untick those programs that you do not need to start up with like msn messenger,quicktime,etc.
Then click apply,and then reboot. That should speed you back up.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
|
ScubaBud
AfterDawn Addict
|
4. March 2005 @ 16:25 |
Link to this message
|
|
colin72
One other thing. After you get your drives back in and setup, go into device manager and remove them/unistall them from there, and then reboot. See if that corrects your problem of showing the wrong drives.
saugmon
How did you like those Sony 8X DVD-R's you purchased? The label on mine show "Made In Taiwan, not Made In Japan.
This message has been edited since posting. Last time this message was edited on 4. March 2005 @ 16:27
|
AfterDawn Addict
|
4. March 2005 @ 16:52 |
Link to this message
|
|
Yo scubabud, I've only burned a couple just to check the compatability on my stand alones. They seem very good.I still have 1 issue of my brother's older sherwood that will not play the dash format from both my 16x burners.This includes ritek go4,mxl-rgo2,and mxl-rg03.
I am on another sony thread,looks like those +1-8x's that say made in japan on sale this week are not coded yuden-000-to2.I haven't opened my 1 spindle up yet.I still have 6 spindles from their last month's sale. They seem to code as SONYD11 this time,the same code I ran into in december on the 25 pack spindles at staples-that were made in taiwan.
Did you get that same sony08D1's on the taiwanese dash 1x-8x sony's?
I did run into the same problem on the -1x-4x's.It had the mfg code: sony04D1 on both the taiwanese and austrian spindles. Looks like sony uses those same exact codes on different countries.
Those taiwanese +1x-8x still rocked,can't complain there.I thought I had them figured out,but I still feel more at ease with them stating "Made In Japan".
Staple's have the +/- 1x-8x 25 pack spindles on sale sunday for $9.94. I went in there earlier to check up on them and they were all taiwanese.I forgot to look at the dash sony's.
I wander how colin72 is getting along?
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
|
|
ScubaBud
AfterDawn Addict
|
4. March 2005 @ 17:31 |
Link to this message
|
|
Did you get that same sony08D1's on the taiwanese dash 1x-8x sony's?
Yes, I found the wrap from my Sony's and I thought that they were Japan, but the fine print did say Taiwan. They have been great with me and burned well even at 16x. Like you, I would of felt much better if they did say Japan.
colin72 how are you making out? And you too GRCRYSTYK?
|
|
GRCRYSTYK
Newbie
|
4. March 2005 @ 18:25 |
Link to this message
|
|
Hey guys,...
I seem to be straightened out. Swapped the drives, and swapped jumpers on both of them,..Has booted up as it did before three times now,....Time will tell however.
I had read that there are a few drives out there, that just don't play nice with other drives on the same ribbon. Thought I may have run into that. My system must have just had a small glitch,....
As for shutting off most start up items, I run as few as I can in the background, so I knew it wasn't that. I think it will run ok now,...Never had that happen before though,....
Now if I can just figure out which software I like...;) Wow! There is sooo much to become familiar with,..I'm going cross eyed trying to read everything. Any suggestions for a newbie?
Thanks again guys,...GRCRY,...>>>--->
|
AfterDawn Addict
|
4. March 2005 @ 23:10 |
Link to this message
|
Grcry, now you see the media problems we run into on dvd burning.Sony is not a bad brand name,it just seems the 1x-8x speeds seem a lot better than their 4x. You should check out some codes for memorex,pretty scary.
This is not like your old cd-burning. Lots of things can go wrong because of where we play those backups. Quality media is a must. That cheap/generic/store brand names like staples-bestbuy-office depot brands/and memorex are best just won't cut it.It can screw us up in a zillion different ways.You stick with the good stuff made in japan,and a lot of issues will be prevented.
What software to like? Not sure of what kind of files you are trying to put on dvd, but DVD Shrink , Nero , and DVD Decrypter are some great programs to have on your pc.Nero and shrink do 95% of my dvd movie backups.
You stick with the good media, backup target set at 4360 mbs,and a nice sensible 4x burn speed and you should be ok. Just a few pointers for you. Just search around here,there's a whole lot of info,tools,free software,and programs at your service.Ps, And a slew of great members from all over the world.
Good Luck and burn on!!!!!!
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
|
|
ScubaBud
AfterDawn Addict
|
4. March 2005 @ 23:44 |
Link to this message
|
GRCRYSTYK
Glad you have your system starting better. That is interesting that just that change helped, but it might have been a "Freshen Up/Spring Cleaning" so to speak for your Device Manager, putting things back in place for a while. If that does happen again, I would look at your DMA setting on your Opticals to see whether they went from a DMA mode to a PIO mode. Windows will slow down, or change your DMA settings whenever there is a problem while reading disks, or running into CRC errors. After about 5 or 6 times, it puts your drive or drives back to the PIO mode, which is very, very slow. :)
I started to just use AnyDVD in the background and Recode2 for my movie backups lately. It's very fast and easy that way also. My family used to say, ?I want everything on there including the extras,? but now has given me permission to just copy Movie Only with Menu's. When you pop in the disk you get right to the movie and besides, I can?t even recall when the last time was that any of us looked at any special features. Several of the movies lately needed little to no compression this way, going from a DVD9 to a DVD5. No & Low is good when it comes to backing up movies! Good luck with anyway you choose since there are many ways to accomplish backing up your DVD?s. :)
|
AfterDawn Addict
|
5. March 2005 @ 00:20 |
Link to this message
|
|
Yo scubabud, don't you ever sleep?lol
Or are you a midnight shift worker with another screwed up weekend like me?
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
|
|
ScubaBud
AfterDawn Addict
|
5. March 2005 @ 00:26 |
Link to this message
|
|
Hey saugmon,
Nope... Just that my wife snores... <G>
(wife peering over my shoulder)
Woops.... Just kidding Hunnee, Just kidding! :)
This message has been edited since posting. Last time this message was edited on 5. March 2005 @ 00:27
|
|
colin72
Newbie
|
5. March 2005 @ 00:39 |
Link to this message
|
|
ScubaBud:
"I would have suggested that you first make your new
DVD Burner the Master and put back your DVD-Rom drive making it the slave since your DVD Burner will also be what you will use for your CD burning as well. This way when you backup a DVD movie, you can use your DVD-Rom for ripping and your Burner for Burning the blank media. Hopefully your new burner came with a different ribbon cable such as one with a blue end which goes to the MB, a black plug which goes to the master, and a grey plug that goes to your slave."
As I said, my burner did not come with anything. So where does that leave me?
-------------------------------------------
I tried to use the NEV DVD Drive to burn some files to and free up hard drive space. I also wanted to see if it would work. It doesn't.
I've tried twice now and each time, it starts burning and then my computer freezes. Once it got about 20% complete burning 4 GB of data.
So as I've said it seems that I do not have this set up correctly.
Any ideas?
|
|
ScubaBud
AfterDawn Addict
|
5. March 2005 @ 00:50 |
Link to this message
|
colin72
Lets get a bit more information about your system.
What are your PC specs:
CPU
Memory
Hard Drive size and most important, how much free space on it now. This might be your one of your problems.
Your Power supply also is important. What is it's rating? 300 watts, 350watts, etc. (We just had another member that had the same problem and it was his PSU under rated.)http://forums.afterdawn.com/thread_view.cfm/162336
|
AfterDawn Addict
|
5. March 2005 @ 01:01 |
Link to this message
|
Colin, your pc specs are very low. The usual recommendation is 256 mbs ram,windows xp,10 extra gigs of empty hard drive space, and at least 1.0 ghz processor. I have my spare pc set up to burn and it has a p3-celeron 598 mhz,,256 mbs ram,xp-sp1, and I have an extra 30 gig hard drive,set up very similar to my main pc.It takes a little longer,especially on those larger DVD-9 movies,but is great to have a spare when I run into problems.
I just got through re-ripping a couple of my backups on the fly,using my dvd-rom set on master and benq on slave.100% success rate on over 120 + of my backups now. Cd's are no problem either.
Colin, what brand/speed/and format of media are you trying to burn?
How fast are you trying to burn it? You may have to slow it down.
Scuba bud beat me to it,
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
|
|
colin72
Newbie
|
5. March 2005 @ 01:12 |
Link to this message
|
|
|
|
ScubaBud
AfterDawn Addict
|
5. March 2005 @ 01:13 |
Link to this message
|
Quote:
I have a HP Pavilion Desktop (9680C), Win 98 SE, 650 Pentium 3, 128 MB RAM.
saugmon
After reading your last post I started to think you were psychic about colin72?s specs until I re-read the thread. I guess I better get some coffee and wake up before posting anymore. <G>
Thanks for being kind in letting me know, in a nice way that he already posted most of the info! :)
I have a feeling it?s his lack of HD space or PSU on this one also, even more now that I re-read his specs from before. His memory issue is going to slow him way down also!
|
|
ScubaBud
AfterDawn Addict
|
5. March 2005 @ 01:25 |
Link to this message
|
|
Intel Pentium (R) III 650 MHz processor
You see, I'm not the only one that needs coffee this morning. :)
colin72
Try and free up more HD space then what you have first and then try it again. As Saugmon suggested, at least 10 GB, but I would try for at least 15GB.
From what I just searched for it seems that your PSU is a 200watt which is very low for demands needed today.
It might be time to find a great deal on a PC before investing in more upgrades on this one.
Again, try freeing up some space and let us know how you make out.
|
AfterDawn Addict
|
5. March 2005 @ 01:37 |
Link to this message
|
|
An extra hardrive and another 128 mb stick of ram should help jump start that pc,if you want to take that route.
Also up that power supply like scubabud posted.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
This message has been edited since posting. Last time this message was edited on 5. March 2005 @ 01:39
|
AfterDawn Addict
|
5. March 2005 @ 01:48 |
Link to this message
|
|
I also took another scan through this thread, I thought he had 650 mhz processor,but 350 mhz-holy cow. I haven't run into anybodys processor that low since I joined up. I thought my 598 mhz was pushing the limit- but the extra ram,and placing those few dvd movie folders on that extra hard drive and off my system hd helped.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
|
|
colin72
Newbie
|
5. March 2005 @ 01:54 |
Link to this message
|
|
saugmon: No, the processor is 650 mhz.
Everybody needs some coffee!
I'm in the process of freeing up hard drive space. I'll let you guys know how I make out.
I REALLY appreciate all the help with this.
|
|
Advertisement
|
|
|
|
colin72
Newbie
|
5. March 2005 @ 02:12 |
Link to this message
|
|
Well, I freed up 10 Gb of space and then tried to burn a data DVD using CopytoDVD to free up more.
When I did this, I received the message:
Please insert a writable media. Required free space estimation: 4.24 Gb
And my CD-ROM automatically opened! I have the blank DVD in my NEC drive.
My computer wants me to put the DVD in the CD-ROM?! Something is obviously screwed up.
Any ideas?
|
|
