Mobile/PDA About Us Advertise here
User User name Password  
  Not registered yet? Register here.
Lost your password? Click here. 		 
  Home   News   Guides   Downloads   Glossary   Hardware   Profiles   Forums   v4  
 Advertise at AfterDawn.com     Link to us!     Private messages     Compose a private message     List of all updated threads     Threads without replies     Search messages
Wednesday 8.10.2025 / 17:57
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > dvd±r discussion > dvd±r for advanced users > pioneer 109 intermittent problems
Show topics
 
Forums
Forums
Pioneer 109 intermittent problems
  Jump to:
 
Posted Message
hunzol
Newbie
_ 		11. May 2005 @ 06:23 _ Link to this message    Send private message to this user   
Hello, I recently purchased a 109 and flashed the firmware to 1.40 ,I am getting intermittent burning failures with nero and dvd decrypter, luckily the burning procedure stops at 1% and doesn't actually burn to dvd. I have tried this burner in 3 pc's and most of the time it failed, then I tried it in a work pc and worked 95% of the time which is really strange, so I took a a09 and a nec 3500 home and tried it in my new machine and they worked fine. I took the 109 back to the shop to test it and guess what! it worked! shop said they can't return it because it worked in their machine, so I bought a 3520 and chucked the 109 back into my new machine and also put the 3520 in there as well and tried to burn a dvd with the 109...it failed... so straight after I used the 3520 with no hassles at all. Here are the logs of 3 burns, 1 with RITEK MEDIA IN NERO, 1 with RECORD MEDIA IN NERO and 1 with RITEK MEDIA IN DVD DECRYPTER.


RITEK in NERO

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 734MB (751672kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.5.2005
Burn DVD Image
10:19:05 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:19:05 PM #2 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running

10:19:05 PM #3 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

10:19:06 PM #4 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286011 (508:00.11, 4464MB)

10:19:06 PM #5 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

10:19:06 PM #6 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

10:19:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:19:06 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286012 (2286012) = #2286012/508:0.12
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286012 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------

10:19:06 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681752576, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286012 | lead-out | 1 | 0x41 | 0x00

10:19:06 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:19:06 PM #11 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

10:19:06 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:19:06 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:19:06 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:19:06 PM #15 Text 0 File DVDR.cpp, Line 2258
Recording mode: Sequential Recording Mode for Multisession

10:19:06 PM #16 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Buffer underrun protection -> ON

10:19:06 PM #17 Text 0 File DVDR.cpp, Line 2412
Start write address at LBA 0
DVD high compatibility mode: Yes

10:19:06 PM #18 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:19:08 PM #19 Text 0 File Cdrdrv.cpp, Line 1288
22:19:08.203 - PIONEER DVD-RW DVR-109\H0 T2 : Queue again later

10:21:07 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x04300000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

10:21:07 PM #21 CDR -1135 File Writer.cpp, Line 311
Write error

10:21:08 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:21:08 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:21:08 PM #24 Text 0 File DVDR.cpp, Line 2649
EndDAO: Last written address was 767

10:21:08 PM #25 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

10:21:08 PM #26 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 2, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x04

10:21:08 PM #27 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error

10:21:08 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

10:21:08 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0475 built by: WinDDK, size=86144 bytes, created 4/11/2004 6:58:20 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

RECORD in NERO


AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 709MB (726072kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.5.2005
Burn DVD Image
11:07:02 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

11:07:02 PM #2 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running

11:07:02 PM #3 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

11:07:03 PM #4 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286011 (508:00.11, 4464MB)

11:07:03 PM #5 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

11:07:03 PM #6 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: GSC003 -
Disc Application Code: 64, Disc Physical Code: 193

11:07:03 PM #7 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:07:03 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286012 (2286012) = #2286012/508:0.12
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286012 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------

11:07:03 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681752576, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286012 | lead-out | 1 | 0x41 | 0x00

11:07:03 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:07:03 PM #11 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

11:07:03 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:07:03 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

11:07:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:07:03 PM #15 Text 0 File DVDR.cpp, Line 2258
Recording mode: Sequential Recording Mode for Multisession

11:07:03 PM #16 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Buffer underrun protection -> ON

11:07:03 PM #17 Text 0 File DVDR.cpp, Line 2412
Start write address at LBA 0
DVD high compatibility mode: Yes

11:07:03 PM #18 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 20 01 02 04 06 08 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:07:03 PM #19 Text 0 File Cdrdrv.cpp, Line 1288
23:07:03.859 - PIONEER DVD-RW DVR-109\H0 T2 : Queue again later

11:09:28 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x03280000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

11:09:28 PM #21 CDR -1135 File Writer.cpp, Line 311
Write error

11:09:28 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:09:28 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:09:28 PM #24 Text 0 File DVDR.cpp, Line 2649
EndDAO: Last written address was 767

11:09:28 PM #25 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

11:09:28 PM #26 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 2, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x04

11:09:28 PM #27 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error

11:09:28 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

11:09:28 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0475 built by: WinDDK, size=86144 bytes, created 4/11/2004 6:58:20 AM (Adapter driver for rec)


RITEK in DVD DECRYPTER

I 23:22:20 DVD Decrypter Version 3.5.2.0 started!
I 23:22:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 23:22:20 Initialising SPTI...
I 23:22:20 Searching for SCSI / ATAPI devices...
I 23:22:20 Found 1 DVD±RW!
I 23:23:26 Operation Started!
I 23:23:26 Source File: O:\Movies\dvd\Simpsons\SIMPSONS_SEASON3_DISC3.ISO
I 23:23:26 Source File Sectors: 2,285,862 (MODE1/2048)
I 23:23:26 Source File Size: 4,681,445,376 bytes
I 23:23:26 Destination Device: [0:2:0] PIONEER DVD-RW DVR-109 1.40 (XSmile (ATA)
I 23:23:26 Destination Media Type: DVD-R (Disc ID: RITEKG05) (Speeds: 4x, 6x, 8x, 12x)
I 23:23:26 Destination Media Sectors: 2,298,496
I 23:23:26 Write Mode: DVD
I 23:23:26 Write Speed: 8x
I 23:23:26 Test Mode: No
I 23:23:26 BURN-Proof: Enabled
I 23:23:26 Filling Buffer...
I 23:23:26 Writing LeadIn...
W 23:25:14 Failed to Write Sectors 768 - 799 - Write Error
W 23:25:14 Retrying (1 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (2 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (3 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (4 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (5 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (6 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (7 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (8 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (9 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (10 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (11 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (12 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (13 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (14 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (15 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (16 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (17 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (18 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (19 of 20)...
W 23:25:14 Retry Failed - Invalid Address For Write
W 23:25:14 Retrying (20 of 20)...
W 23:25:14 Retry Failed! - Invalid Address For Write
E 23:25:32 Failed to Write Sectors 768 - 799 - Invalid Address For Write
I 23:25:32 Synchronising Cache...
E 23:25:32 Failed to Write Image!
E 23:25:32 Operation Failed! - Duration: 00:02:05
I 23:25:32 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 315 KB/s (0.2x)
[ + quote]
Advertisement
_ 		__
cougar_ii
Senior Member
_ 		11. May 2005 @ 07:24 _ Link to this message    Send private message to this user   
Hi there,

I didn't see your full Nero log, but is DMA enabled on that burner ?

I also noticed you tryed to burn at 8x, did you try at a lower speed and see if this helps ?
Quote:
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
I think when you see this, it didn't like your media, usually it should display the Media ID right people ?

Is v1.40 the latest firmware for that Pioneer 109 ?
[ + quote]
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester

This message has been edited since posting. Last time this message was edited on 11. May 2005 @ 07:24
squizzle
AfterDawn Addict
_ 		11. May 2005 @ 13:24 _ Link to this message    Send private message to this user   
maybe an ASPI issue? Check out the Newbies link in my sig, bbmayo posted something about ASPI problems.
[ + quote]
Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html

My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle
hunzol
Newbie
_ 		11. May 2005 @ 14:10 _ Link to this message    Send private message to this user   
cougar_ii: It's at Ultra DMA 4 (66), I haven't bothered with 4x speed, I can try tonight. I thought Ritek suppose to be a good brand? I have used Record media for years on my 105 with no hassles, not one coaster.


squizzle: I really don't know anymore, it's a fresh install of Nero and Win Xp Sp2.
[ + quote]
squizzle
AfterDawn Addict
_ 		11. May 2005 @ 15:46 _ Link to this message    Send private message to this user   
Here's a quote from the Newbies link in my sig:

<11>What is ASPI and do I need it?
The term 'ASPI' is an acronym that stands for: Advanced SCSI Programming Interface. All the following terms are synonymous: ASPI layer, ASPI drivers, ASPI interface. The term 'SCSI' [scuzzy] is an acronym that stands for Small Computer Systems Interface. An ASPI layer consists of four files that 'lie between' various programs [software] and certain devices, such as CD/DVD-ROM drives and CD/DVD burners/writers [hardware]. Software programs such as CD digital audio extractors [commonly known as 'Rippers'] and CD-writing utilities such as CDRWin use/require ASPI drivers to 'communicate with' SCSI devices. Many people don't realize however, that the files contained in an ASPI layer are also used in systems that *don't* contain a SCSI adapter, or SCSI devices .. for things such as ripping CD audio and burning CD/DVDs.
ASPI DOWNLOAD http://www.adaptec.com/worldwide/support/driverdetail.jsp?cat=/Product/ASPI-4.70&filekey=aspi_471a2.exe&sess=no
[ + quote]
Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html

My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle
hunzol
Newbie
_ 		11. May 2005 @ 16:15 _ Link to this message    Send private message to this user   
squizzle: err well you'd think XP SP2 would have all the drivers ready to burn dvd's, with the 105 I had a while ago, I've never had any issues with burning dvds, and if it's is the ASPI then why would the A09 and the NEC 3500 & 3520 work??
[ + quote]
hunzol
Newbie
_ 		11. May 2005 @ 16:21 _ Link to this message    Send private message to this user   
By the way, this is what was written on http://pioneerdvd.rpc1.org/#BOOTISO

Adaptec ASPI32 layer for Windows v4.60
The ASPI32 layer for Windows applications that may require it.
Don't use version 4.70 from Adaptec's site. It's a piece of crap!
[ + quote]
squizzle
AfterDawn Addict
_ 		11. May 2005 @ 16:47 _ Link to this message    Send private message to this user   
I don't know too much about it, but I have XP Service Pack 2 and I had a bad ASPI layer installed (for Windows, Nero has its own seperate one). The Adaptec one worked for me.

Nero InfoTools said I had a bad Windows ASPI, after installing the Adaptec one, it said it was good.
[ + quote]
Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html

My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle
hunzol
Newbie
_ 		11. May 2005 @ 17:19 _ Link to this message    Send private message to this user   
Ok well then Nero would of installed the latest one with patch update 6.6.0.12 no? or should I download the latest one from adaptec? Is the 109 more picky with ASPI then the 105, 3520, 3500 and the A09? (even tho the A09 is pretty much the same drive as the 109)
[ + quote]
squizzle
AfterDawn Addict
_ 		11. May 2005 @ 17:29 _ Link to this message    Send private message to this user   
I don't know your setup. You should go into Nero Infotools and check the ASPI layer for Nero and Windows.
[ + quote]
Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html

My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle
hunzol
Newbie
_ 		11. May 2005 @ 18:04 _ Link to this message    Send private message to this user   
I'll check it out tonight once I get home, tho how can I find out on what Nero 6.6.0.12 and XP SP2 should install as default? Would Ahead and Windows have a spec page somewhere because I can't find one.
[ + quote]
squizzle
AfterDawn Addict
_ 		11. May 2005 @ 19:17 _ Link to this message    Send private message to this user   



That's what it looks like when your ASPI is good. Notice the drop-down menu to select system or Nero ASPI. It'll tell you here if your ASPI is bad. Try it and see.
[ + quote]
Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html

My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle
hunzol
Newbie
_ 		11. May 2005 @ 19:23 _ Link to this message    Send private message to this user   
Knowing my luck it will all say it's in working order, I always seem to get the weird A$$ problems, I reckon it's something else at fault because I'm getting these probs before I formatted and after but like I said I will check tonight.
[ + quote]
hunzol
Newbie
_ 		12. May 2005 @ 01:50 _ Link to this message    Send private message to this user   
Under System Aspi there is nothing, and under Nero Aspi I have the winaspi32 but now I tried installing that bs apsi update 4.17 and the 2 items under System Aspi are there but corrupt, Nero is still fine and I still get write failures.
[ + quote]
Jerry746
AfterDawn Addict
_ 		12. May 2005 @ 05:38 _ Link to this message    Send private message to this user   
Try this link. It may help sort out the ASPI problem.

http://cd-rw.org/articles/archive/aspisetup.cfm

Jerry
[ + quote]
Advertisement
_ 		__
 
_
hunzol
Newbie
_ 		28. May 2005 @ 14:31 _ Link to this message    Send private message to this user   
Well I had to reformat and it seems I still have issues, this time I just installed ForceASPI and I get intermittent failures but more failures then succesful burns. I reckon the new 109 is shiyt, my 3520 shat all over it, no hassles what so ever.
[ + quote]
afterdawn.com > forums > dvd±r discussion > dvd±r for advanced users > pioneer 109 intermittent problems
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork