|
|
|
Explain This Error Log
|
|
|
Nehmo
Junior Member
|
18. October 2005 @ 14:24 |
Link to this message
|
|
I suspect the NVIDIA controler(s) is the preferable one(s). I did find the CD that came with the m'board, and I think it's the one with the NVIDIA stuff on it. I haven't put it in yet.
I used to burn a 16x. It seems I should be able to do that again. I'm going to try at 4x to see what happens.
Incidentally, the usually stable machine just crashed. It's back up but the reboot was a little out of order: the wallpaper showed briefly _before_ the loading your personal settings. Anyway, it seems to be working okay now.
I take that back. I put the CD in and I'm getting a warning aroub Autoloader.A . Of course, I used this CD before - when I got the m-board. I'm doing a virus scan. Sending this now. See you on the other side.
|
|
Advertisement
|
 |
|
|
|
Nehmo
Junior Member
|
18. October 2005 @ 18:52 |
Link to this message
|
|
SIGuardian, a disk monitoring program, is reporting T.E.C. (Threshold Exceeds Condition, particularlly in the Seek Error Rate, of the system/boot drive, or C drive.
Actually, perhaps a hint to this, high temperature of the HD (but oddly, all three of the HDs), is what made me want to fix the DVD writing ability. I wanted to back things up. But now, given that SIGuardian gives a fail date only two days away, I'm going to devote my attention to cloneing the C drive to H, a 160 GB drive that I now just keep movies on.
As I just posted, I just had a small problem with a trojen, but I belive that's solved now.
I haven't re-installed the NVIDIA controlers yet.
|
|
Nehmo
Junior Member
|
6. November 2005 @ 08:29 |
Link to this message
|
I still haven't gotten the burner to work, that is, it will do CDs but not DVDs. I tried using 4x instead of 16x, and it still doesn't work.
It truns out the malware warning I got from MS Antispyware was incorrect. I also determined the SiGuardian warning was irrelevant and probably incorrect. So other than the DVD burner not being able to burn DVDs, my system is okay.
I?m going to post a fresh Nero error log in a new thread.
|
Moderator
|
6. November 2005 @ 09:20 |
Link to this message
|
|
just paste the new log here, it's best to keep the problem contained to one thread until completion. spreading the problem across threads makes it longer to fix the problem and makes it harder for ppl to help you
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Nehmo
Junior Member
|
6. November 2005 @ 11:01 |
Link to this message
|
Okay, here it is.
I had assumed everybody had given up on me.
-----------------
Nehmo Sergheyev
Vapor
1A20-...*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS10 - HA 3 TA 1 - 6.6.0.8
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <dd347prt> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorpCD/DVDW TS-H552BTS10 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD1600JB-00GVA0 08.0 nvidesm Port 0 ID 1 DMA: Off
DiskPeripheral : ST3120026A 8.01 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD800JB-00ETA0 77.0 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 dd347prt Port 1 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
Generic DVD-ROM F: CDRom1
AXV CD/DVD-ROM G: CDRom2
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 428MB (439180kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.11.2005
UDF/ISO compilation
12:22:54 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
12:22:54 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
12:22:54 AM #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:22:54 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
12:22:54 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
12:22:54 AM #6 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552B running
12:22:54 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
12:22:54 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
12:22:54 AM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
12:22:55 AM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2211007 (491:20.07, 4318MB)
12:22:55 AM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
12:22:55 AM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
12:22:55 AM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:22:55 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2211008 (2211008) = #2211008/491:20.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2211008 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
12:22:55 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4528144384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2211008 | lead-out | 1 | 0x41 | 0x00
12:22:55 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:22:55 AM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
12:22:55 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:22:55 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
12:22:55 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:22:55 AM #21 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:22:55 AM #22 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 0
DVD high compatibility mode: Yes
12:23:08 AM #23 SCSI -500 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x0A070000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:23:12 AM #24 SCSI -1064 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x0A920600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02
12:23:12 AM #25 CDR -1064 File Writer.cpp, Line 311
Invalid block address
12:23:13 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:23:13 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:23:14 AM #28 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12:25:08 AM #29 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
12:25:08 AM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 2:02:55 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\dd347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 3:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
6. November 2005 @ 11:10 |
Link to this message
|
Nah, i never leave a Nero log unturned :)
Quote:
Nero Version: 6.6.0.8 (Nero Express)
- not too bad, 6.6.0.16 is latest 6.x version
Quote:
CdRomPeripheral : TSSTcorpCD/DVDW TS-H552BTS10 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD1600JB-00GVA0 08.0 nvidesm Port 0 ID 1 DMA: Off
DiskPeripheral : ST3120026A 8.01 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD800JB-00ETA0 77.0 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 dd347prt Port 1 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
- you've got the Nvidia drivers on there again, do whatever you did before, further up the thread to get DMA to be ON again...
Quote:
Invalid block address
- see previous comment
Quote:
Existing drivers:
- ditto, hopefully we'll see thr ATAPI drivers show up in this section too
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Nehmo
Junior Member
|
6. November 2005 @ 13:03 |
Link to this message
|
|
Previously, I uninstalled the drivers, and the Windows XP ones took over. The DMA went on, but the burner still didn't write. So you're saying I should try that again?
What would make it successful the second time around? Would there be something else to adjust once the Windows drivers are back in?
|
Moderator
|
6. November 2005 @ 21:36 |
Link to this message
|
|
if you go back thru the thread (i had to do that to refresh my memory) we got as far as getting rid of those pesky nvidia drivers, we had atapi drivers in there place then the last input i had was trying to get you to go 4x instead of 16x..... i think you'll need to do that again to make progress...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
7. November 2005 @ 05:43 |
Link to this message
|
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
|
|
Nehmo
Junior Member
|
7. November 2005 @ 22:54 |
Link to this message
|
Well, I'm going to try it again. But for some time, *with* those Nvidia drivers, everything worked.
I also just got the latest version of Nero. I'm going to install that.
|
|
Nehmo
Junior Member
|
12. November 2005 @ 19:34 |
Link to this message
|
I installed the new Nero 7 Ultra Edition. It's actually several apps, and I'm pleased with it. It replaces a slew of auxiliary programs like file converters, etc. Everybody must get it.
I didn?t change the NVIDIA drivers, and I just tried the new Nero with the old arrangement. Everything worked, and I?ve already successfully burned three DVDs. Looking at the log, I noticed DMA is still off, but it doesn?t seem to matter now. Thanks, everybody, and particularly Creaky. It was actually that comment about my version 6 being old that made me upgrade.
|
|
Advertisement
|
|
|
Moderator
|
13. November 2005 @ 02:05 |
Link to this message
|
|
cool, as long as you're happy and burning again, good luck
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
