|
|
|
Attn: Newbies..if your DMA is OFF or PIO Mode (here is a very easy guide to fix it)
|
|
|
SoulVein
Newbie
|
2. April 2006 @ 11:46 |
Link to this message
|
Hi
i went thru these PIO.DMA enablign guides from cd club freaks and afterdawn, in this thread too, i've done instructions for deleting the certain cells in Regedit then rebooting every time. I mean my DMA's are back to the default Windows XP IDE drivers, i unisntalled them and rebooted but my Nero burning software to burn audio cd's is still failign or freezing at 7%, it has slightly a sound on the freeze that goes "tick-buzz" every 20 seconds or so. It has always been able to burn at 8x... suddenly i'm making another post like all the others , but the guides on the forums have not fixed the problem still.
I have taken these screenshots of my certain windows of Neroinfotool log, PLUS a screenshot on my IDE channels , there seems to be liek DOUBLE the Primary and secondary ide channels in device manager. Is this possible? They all say (no conflicts) so far though. And all the dma stuff is enabled, and i went thru the nvidia guide as well.
Based off of my screenshots and log files, just give me instructions with this format: step 1 and reboot. step 2 and reboot. etc.
please respond at yoru most earliest convienance. Sincerely thank you for any helps, could this lastly have to do with the ASPI not being installed, BUT the Nero ASPI IS installed, i wondered which one should i use, currenty using the Nero one but its not fixing the problem with my Nero and burning cd-r drive either.
screenshots of my Device Manager & Nerodriveinfotool software etc are here:
http://i45.photobucket.com/albums/f72/pdnmusic/devicescreen.jpg
http://i45.photobucket.com/albums/f72/pdnmusic/HardwareCPU.jpg
http://i45.photobucket.com/albums/f72/pdnmusic/nerodriveinfotool.jpg
http://i45.photobucket.com/albums/f72/pdnmusic/ASPIinfo.jpg
Paul :)
my neroinfotool log:
Nero InfoTool 2.00
Drive Information
-----------------
Drive : SAMSUNG CD-ROM SC-140
Type : CD-ROM Drive
Firmware Version : FT02
Buffer Size : 128 KB
Date : ?
Serial Number : ?
Drive Letter : E:\
Location : 3:0
Mechanism : Tray
Read Speed : 40, 8 X
Write Speed : n/a
Read CD Text : No
Return C2 Pointers : No
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : No
Read DVD-RAM : No
Read DVD-R : No
Read DVD-RW : No
Read DVD+R : No
Read DVD+RW : No
Read Digital Audio : Yes
Read CD+G : No
Read VideoCD : Yes
Write CD-R : No
Write CD-RW : No
Write DVD-R : No
Write DVD-RW : No
Write DVD+R : No
Write DVD+RW : No
Write DVD-RAM : No
Buffer Underrun Protection : No
Mount Rainier : No
Modes : n/a
Disc Information (E:\)
-------------------
Type : Data CD (Mode 1)
Capacity : 20:31.35 (180 MB)
Tracks : 1
Sessions : 1
File System : ISO9660, Joliet
Title : My Disc
Date : 19 February 2004
Publisher : n/a
Application : Nero - Burning ROM
Drive Information
-----------------
Drive : SONY CD-RW CRX230E
Type : CD-RW Recorder
Firmware Version : QYS3
Buffer Size : 2 MB
Date : ?
Serial Number : ?
Drive Letter : F:\
Location : 3:1
Mechanism : Tray
Read Speed : 12, 8, 4 X
Write Speed : 40, 32, 24, 16, 12, 8, 4 X
Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : No
Read DVD-RAM : No
Read DVD-R : No
Read DVD-RW : No
Read DVD+R : No
Read DVD+RW : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes
Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : No
Write DVD-RW : No
Write DVD+R : No
Write DVD+RW : No
Write DVD-RAM : No
Buffer Underrun Protection : Yes
Mount Rainier : Yes
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96
Disc Information (F:\)
-------------------
Type : Blank CD-R
CD-R(W) Info : Ritek, Audio CD-R, 79:59.73
Interface Information
---------------------
Adapter 1
---------
Description : Primary IDE Channel
Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.0 (XPClient.010817-1148)
Description : IDE/ATAPI Port Driver
Attached Devices
Description : Master: WDC WD800BB-75CAA0
Type : Disk Drive
DMA : On
Description : Slave: WDC AC313000R
Type : Disk Drive
DMA : On
Adapter 2
---------
Description : Secondary IDE Channel
Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.0 (XPClient.010817-1148)
Description : IDE/ATAPI Port Driver
Attached Devices
Adapter 3
---------
Description : Secondary IDE Channel
Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.0 (XPClient.010817-1148)
Description : IDE/ATAPI Port Driver
Attached Devices
Adapter 4
---------
Description : Secondary IDE Channel
Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.0 (XPClient.010817-1148)
Description : IDE/ATAPI Port Driver
Attached Devices
Description : Master: SAMSUNG CD-ROM SC-140
Type : CD-Rom Drive
DMA : On
Autorun : On
Description : Slave: SONY CD-RW CRX230E
Type : CD-Rom Drive
DMA : On
Autorun : On
Software Information
--------------------
Operating System : Windows XP Home Edition (5.01.2600 )
ASPI : Nero Aspi Library 2.0.1.56 Ahead Software AG
Description : Nero Burning ROM
Version : 6, 0, 0, 0
Company : Ahead Software AG
Version Check : Ok
Hardware Information
--------------------
CPU : AMD Sempron Processor 3000+ 1800 MHz
Bus Speed : 200 MHz
Motherboard : ASUSTeK 'K8N'
System : ASUSTek K8N
BIOS : AMI 1009
Memory : 1024 MB (60ns)
Sound : M-Audio Delta 44 Multi
Video : NVIDIA GeForce FX 5500
Driver Information
------------------
Driver : ACPI
Description : ACPI Driver for NT
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : AmdK8
Description : AMD Processor Driver
Version : 1.1.0 built by: dnsrv(wmbla)
Company : Advanced Micro Devices
Driver : APPFLT
Description : Panda APPFLT
Version : 0.04.0.0
Company : Panda Software
Driver : atapi
Description : IDE/ATAPI Port Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : audstub
Description : AudStub Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Cdfs
Description : CD-ROM File System Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Cdrom
Description : SCSI CD-ROM Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : CLEDX
Description : Team H2O CLEDX DevWhore
Version : v0.3.1411
Company : Team H2O
Driver : cpoint
Description : cPoint
Version : 1, 2, 0, 2
Company : Panda Software
Driver : DELTA
Description : M-Audio Delta Audio Driver (WDM)
Version : 5.10.00.5051
Company : Midiman/M-Audio
Driver : Disk
Description : PnP Disk Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : DSAFLT
Description : DsaFlt
Version : 1, 2, 0, 50
Company : Panda Software
Driver : Fastfat
Description : Fast FAT File System Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Fdc
Description : Floppy Disk Controller Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Flpydisk
Description : Floppy Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : FNETMON
Description : Panda FNetMon
Version : 0.01.03.00
Company : Panda Software
Driver : Ftdisk
Description : FT Disk Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : gameenum
Description : Game Port Enumerator
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : GEARAspiWDM
Description : CDRom Class Filter Driver
Version : 2.0.4.3
Company : GEAR Software Inc.
Driver : hidusb
Description : USB Miniport Driver for Input Devices
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : i8042prt
Description : i8042 Port Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : IDSFLT
Description : IdsFlt
Version : 1, 2, 0, 50
Company : Panda Software
Driver : Imapi
Description : IMAPI Kernel Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : IPSec
Description : IPSec Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : isapnp
Description : PNP ISA Bus Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : kmixer
Description : Kernel Mode Audio Mixer
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : mouhid
Description : HID Mouse Filter Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : MRxDAV
Description : Windows NT WebDav Minirdr
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : NdisTapi
Description : NDIS 3.0 connection wrapper driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Ndisuio
Description : NDIS User mode I/O Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : NdisWan
Description : MS PPP Framing Driver (Strong Encryption)
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : netflt
Description : NetFlt
Version : 1, 2, 0, 57
Company : Panda Software
Driver : NETFLTDI
Description : Panda TDI Filter
Version : 0.03.02.00
Company : Panda Software
Driver : Npfs
Description : NPFS Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : NVENETFD
Description : NVIDIA Networking Function Driver.
Version : 1.00.00.0448
Company : NVIDIA Corporation
Driver : nvnetbus
Description : NVIDIA Networking Bus Driver.
Version : 1.00.00.0448
Company : NVIDIA Corporation
Driver : nv_agp
Description : NVIDIA nForce AGP Filter
Version : 4.12.01.0377
Company : NVIDIA Corporation
Driver : Parport
Description : Parallel Port Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : PartMgr
Description : Partition Manager
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : ParVdm
Description : VDM Parallel Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : PavProc
Description : Panda Process Protection driver
Version : 1.1.1.1
Company : Panda Software
Driver : PCI
Description : NT Plug and Play PCI Enumerator
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : PCIIde
Description : Generic PCI IDE Bus Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : PSched
Description : MS QoS Packet Scheduler
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Ptilink
Description : Parallel Technologies DirectParallel IO Library
Version : 1.10 (XPClient.010817-1148)
Company : Parallel Technologies, Inc.
Driver : PxHelp20
Description : Px Engine Device Driver for Windows 2000/XP
Version : 2.03.28a
Company : Sonic Solutions
Driver : Rasl2tp
Description : RAS L2TP mini-port/call-manager driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : RasPppoe
Description : RAS PPPoE mini-port/call-manager driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Raspti
Description : PTI DirectParallel(R) mini-port/call-manager driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Rdbss
Description : Redirected Drive Buffering SubSystem Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : RDPCDD
Description : RDP Miniport
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : redbook
Description : Redbook Audio Filter Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : serenum
Description : Serial Port Enumerator
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Serial
Description : Serial Device Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : ShldDrv
Description : PandaShield driver
Version : 1.3.6.0
Company : Panda Software
Driver : SMSFLT
Description : SmsFlt
Version : 1, 2, 0, 53
Company : Panda Software
Driver : sr
Description : System Restore Filesystem Filter Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Srv
Description : Server driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : swenum
Description : Plug and Play Software Device Enumerator
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation
Driver : sysaudio
Description : System Audio WDM Filter
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Tcpip
Description : TCP/IP Protocol Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : TermDD
Description : Terminal Server Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Update
Description : Update Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : usbhub
Description : Default Hub Driver for USB
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : usbohci
Description : OHCI USB Miniport Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : VolSnap
Description : Volume Shadow Copy Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Wanarp
Description : MS Remote Access and Routing ARP Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : wdmaud
Description : MMSYSTEM Wave/Midi API mapper
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : WNMFLT
Description : WnmFlt
Version : 1, 2, 0, 50
Company : Panda Software
Driver : WS2IFSL
Description : Winsock2 IFS Layer
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : msvcrt.dll
Version : 7.0.2600.0 (xpclient.010817-1148)
Driver : msvcirt.dll
Version : 7.0.2600.0 (xpclient.010817-1148)
Driver : mfc42.dll
Version : 6.00.8665.0
Driver : msvcp60.dll
Version : 6.00.8972.0
Driver : msvcp70.dll
Version : 7.00.9466.0
Driver : msvcr70.dll
Version : 7.00.9466.0
Driver : ole32.dll
Version : 5.1.2600.0 (XPClient.010817-1148)
Driver : olepro32.dll
Version : 5.0.5014
Driver : oledlg.dll
Version : 1.0 (XPClient.010817-1148)
Driver : advapi32.dll
Version : 5.1.2600.0 (XPClient.010817-1148)
Driver : comctl32.dll
Version : 5.82 (xpclient.010817-1148)
Driver : setupapi.dll
Version : 5.1.2600.0 (xpclient.010817-1148)
Lower Filters
-------------
Driver : PxHelp20
Description : Px Engine Device Driver for Windows 2000/XP
Version : 2.03.28a
Company : Sonic Solutions
Upper Filters
-------------
Driver : GEARAspiWDM
Description : CDRom Class Filter Driver
Version : 2.0.4.3
Company : GEAR Software Inc.
Video Codecs
------------
Cinepak codec by Radius : 1.10.0.6
Intel 4|2|0 Video V2.50 : 4.4.3400
Intel Indeo(R) Video R3.2
Intel Indeo(R) Video R3.2
Intel Indeo® Video 4.5 : 4.51.16.03
Intel IYUV codec : 5.1.2600.0 (XPClient.010817-1148)
Microsoft RLE : 5.1.2600.0 (xpclient.010817-1148)
Microsoft Video 1 : 5.1.2600.0 (xpclient.010817-1148)
Microsoft YUV : 5.3.0000000.900 built by: DIRECTX
Microsoft YUV : 5.3.0000000.900 built by: DIRECTX
Toshiba YUV codec : 5.1.2600.0 (XPClient.010817-1148)
Microsoft YUV : 5.3.0000000.900 built by: DIRECTX
Microsoft H.263 Video codec : 4.4.3400
Microsoft H.261 Video codec : 4.4.3400
Indeo® video 5.10 : R.5.10.15.2.55
Audio Codecs
------------
Microsoft IMA ADPCM codec : 4.00.0.0
Microsoft ADPCM codec : 4.00.0.0
Microsoft CCITT G.711 A-Law and u-Law codec : 4.00.0.0
Microsoft GSM 6.10 Audio codec : 4.00.0.0
DSP Group TrueSpeech(TM) Software codec : 1.00.0.0
Microsoft G.723.1 codec : 1.02.0.1
Windows Media Audio : 4.02.0.0
Sipro Lab Telecom ACELP.net audio codec : 3.02.0.0
Indeo® audio software : 2.05.0.53
Fraunhofer IIS MPEG Layer-3 codec (advanced) : 1.09.1.49
MSN Messenger Audio codec : 4.00.0.0
Microsoft PCM Converter : 5.00.0.0
ASPI Information
----------------
System ASPI : ASPI is not installed
Nero ASPI : ASPI is installed and working properly
WNASPI32.DLL : 2.0.1.56 163910 bytes April 02, 2003
|
|
Advertisement
|
|
|
|
|
loudpipes
Newbie
|
5. April 2006 @ 17:29 |
Link to this message
|
|
Thanks for the very useful and easy to understand info, will let you know how it turns out, again awesome!
|
|
Sodotch33
Suspended due to non-functional email address
|
20. April 2006 @ 18:28 |
Link to this message
|
Alkohol,
I did the uninstall method u described because of recent slow encode problems. Ultra DMA is showing in primamry and secondary IDE channels but I'm still getting slow encoding. It was never like this...I used to encode & rip an entire dvd in about 15-20 minutes! My frames/sec in Nero recode have dropped from 280-320 to an all time low of 50-97 frames/sec. If anyone could help I'd appreciate it. My drives (Plextor 716-A)firmware is up to date as well as everything else.I already know my computers potential but somethings missing. Please help. Thank You,
Sodotch33
|
AfterDawn Addict
|
20. April 2006 @ 18:54 |
Link to this message
|
|
@sodotch33
Here are a few tips to keep in mind and you'll need to perform them on a daily basis or 3 times a week:
(01) run scan disk or disk clean up
(02) defrag your hard drive
(03) delete all temp files and cookies when shutting down your system or when you're not using your computer
(04) update your dvd burner's firmware to the latest available
(05) don't multi-tasking when ripping or burning
(06) disconnect from the net completely
(07) disable all Anti-Virus programs when ripping and burning
(08) release/free up more memory ram if possible
(09) disable/shut off all other unnecessary/unuse programs that's running
(10) disconnect all ide cables or wires via burner, wait 45 seconds - 1 minute and re-connect everything back, now restart your system.
Best of lucks to you and happy burning!
|
|
Sodotch33
Suspended due to non-functional email address
|
20. April 2006 @ 21:53 |
Link to this message
|
Alkohol,
Have been doing most of the things U put on the list since I started burning. Went through the list and performed them anyway and still no luck with my slow encoding. I'm runnig a P4 3.8GHz w/2G of ram..for burning I'm using dvd for free decrypter coupled with Nero recode and my Plextor 716-A.It made flawless copies of my own dvd's. when I first purchesed this computer and installed my burner it ran like a champ and burned so fast and then one day I turned on my computer to find Nero recode running so slow. Any other ideas??? Thanks for the help...
Sodotch33
|
|
Sodotch33
Suspended due to non-functional email address
|
21. April 2006 @ 12:54 |
Link to this message
|
Alkohol,
Here's my latest completed burn log... Is it because my hard drives dma is turned off???
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Recorder: <PLEXTOR DVDR PX-760A> Version: 1.01 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class:
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR DVDR PX-760A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8487B atapi Port 0 ID 1 DMA: On
DiskPeripheral : SAMSUNG HD160JJ/P nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : WDC WD4000KD-00NAB0 nvatabus Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A E: CDRom0
HL-DT-ST CD-RW GCE-8487B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2045MB (2094556kB)
Free physical memory: 1373MB (1406624kB)
Memory in use : 32
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.4.2006
NeroAPI
12:33:42 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
12:33:42 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
12:33:42 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
12:33:42 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
12:33:42 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
12:33:42 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: PLEXTOR DVDR PX-760A running
12:33:42 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:33:42 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:33:42 PM #9 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
12:33:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2283471 (507:26.21, 4459MB)
12:33:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
12:33:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
12:33:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:33:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283472 (2283472) = #2283472/507:26.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283472 blocks [E: PLEXTOR DVDR PX-760A]
--------------------------------------------------------------
12:33:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676550656, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2283472 | lead-out | 1 | 0x41 | 0x00
12:33:43 PM #16 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:33:43 PM #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
12:33:43 PM #18 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
12:33:43 PM #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
12:33:43 PM #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)
12:33:43 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:33:43 PM #22 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
12:33:43 PM #23 Text 0 File MMC.cpp, Line 21541
Set BUFE: BURN-Proof -> ON
12:33:43 PM #24 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
12:33:43 PM #25 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:33:48 PM #26 Text 0 File Cdrdrv.cpp, Line 1195
12:33:48.187 - E: PLEXTOR DVDR PX-760A : Queue again later
12:34:02 PM #27 Text 0 File Cdrdrv.cpp, Line 1195
12:34:02.250 - E: PLEXTOR DVDR PX-760A : Queue again later
12:45:57 PM #28 Text 0 File WriterStatus.cpp, Line 116
<E: PLEXTOR DVDR PX-760A> start writing Lead-Out at LBA 2283472 (22D7D0h), length 0 blocks
12:45:57 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:45:57 PM #30 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 2283471
12:46:21 PM #31 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.0.162 , size=24576 bytes, created 1/27/2004 2:32:00 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
12:46:24 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
|
|
Komet
Newbie
|
23. April 2006 @ 20:38 |
Link to this message
|
|
Hi I have found this to be dead right,I had the trouble with Shrink taking so long and after reading this thread I checked out my computer and found that it had switched to PIO so I folowed the great instructions and they worked a treat,it is so easy to do thank you guys for easy lay out to follow ( as I am no computer cheek ) but was able to get back up to speed we now do Shrink on about 15 to 20 minutes and straight copy in 10, a lot better than 1hr 40.
Thanks mate. Komet
|
|
dougga22
Junior Member
|
24. April 2006 @ 05:35 |
Link to this message
|
|
A Couple of questions if you don't mind ALKOHOL.
I am sure that you know, but if you press the windows key and the pause break key at the same time it will take you to system properties a little quicker.
I have two computers and here is what I get.
#1
a burn takes about 1 hour and 15 minutes a little slower than the 30 minutes it used to take.
I have two secondary devices and two primary devices listed.
In the primary under the first one I have Ultra dma mode 5 listed under o and then on the second one i have Ultra dma mode 5 listed under device 1. I assume this is alright.
but
under the secondary ide, i also have two listed and on both I have
auto detection
dma if available
and not applicable on both device 1 and o.
Is this a problem?
#2
I am going to follow your excellent instructions because this one takes about 4-7 hours to burn and I have the following
Primary
device o
not applicable
device 1
pio mode
secondary
device 0
ultra dma mode 2
device 1
ultra dma mode 2
I assume that i must get rid of the dreaded pio mode. Thanks for the great guide and hopefully you will be able to answer the questions.
doug
|
Senior Member
|
24. April 2006 @ 05:50 |
Link to this message
|
|
@Doug
Just follow Alkohol's guide on page 1. It has pictures and comments on how to turn your DMA back on.
nasayin
|
|
dougga22
Junior Member
|
24. April 2006 @ 05:58 |
Link to this message
|
|
Thanks, I know that and have done that on my second computer and the guide was great. I was wondering whether I needed to do it on computer #1 with the info I supplied. Any help is appreciated.
thanks
doug
|
Senior Member
|
24. April 2006 @ 06:52 |
Link to this message
|
|
Yes do the same for your first computer. Your DMA should be on for your secondary ide also.
nasayin
|
|
dougga22
Junior Member
|
24. April 2006 @ 07:13 |
Link to this message
|
|
I just tried to uninstall and then restart my computer for both the secondary ide and even though i did it twice I still get "not applicable' in the transfer mode. Is that a problem?
thanks again
doug
|
Senior Member
|
24. April 2006 @ 07:20 |
Link to this message
|
|
What is on your secondary ide cable? DVD burner? CD burner? And can you read a disc when inserted to your secondary drives.
nasayin
|
|
dougga22
Junior Member
|
24. April 2006 @ 07:53 |
Link to this message
|
|
Thanks, that may be the problem. I just bought a new dvd rom and had it installed this morning and it may not be working properly. I will get it checked right away. Previous to that I only had one dvd burner installed and nothing else.
thanks again for everything
doug
|
|
JaguarGod
Senior Member
|
24. April 2006 @ 09:06 |
Link to this message
|
@Alkohol,
You have made another very nice guide!! I have a question for you though.
I was doing some reading on Starforce, and it seems like this can also force your optical drives into PIO mode. I do not have Starforce on my PC, but if you are infected with it will it show up in the device manager that you are in PIO mode or will it show DMA and run in PIO?
Also, here is a link to the Starforce Driver Removal tools for anyone that wants them:
http://onlinesecurity-on.com/downloads/sfdrvrem.zip
For those that do not know, Starforce is a "copy protection" that is found on some games. It however acts like a virus by installing drivers that have system level permissions. This can exploit your PC and allow trojans and such into your system. Also, as an extra means of "protection", it forces your optical drives into PIO mode which can eventually destroy them or render them useless.
|
|
namralaks
Newbie
|
25. April 2006 @ 10:43 |
Link to this message
|
|
um I need to enable dma on my drives but the pictures are no longer there in this guide..plz help
|
Senior Member
|
25. April 2006 @ 11:39 |
Link to this message
|
nasayin
|
Member
|
26. April 2006 @ 09:56 |
Link to this message
|
|
When I tried to turn my dma on to my slave, I did everything you said, but I don't show an advanced setting, that part is not there. What do I do now? I've tried uninstalling and reinstalling and my dma for my slave according to system check in nero just say's autorun on dma off, but it is on for my master which is my burner. I have a Dell optiplex GX240 with windows XP pro with service pack 2, could that have something to do with it.
This message has been edited since posting. Last time this message was edited on 26. April 2006 @ 10:02
|
|
neelrup
Newbie
|
27. April 2006 @ 05:12 |
Link to this message
|
Hi Alkohol,
Thank you for ur deatiled helps in Page 1. But I have tried all these but still both my IDE Channels have PIO settings. I have the hard-dsk (master) and a DVD burner (slave) in Primary IDE and LG DVD Burner (master) and Samsung CDRW (slave) in Secondary IDE. I am going crazy with this as when I burn DVD-R (8x), it burns only at 1x, taking 50 mints to burn 4 GB data.
Another problem is that, when I uninstall the secondary IDE, after rebooting, the "Advanced Setting" disappears !?! Also, when I uninstalled the Primary IDE, I had problem in re-booting as my hard-disk is attached to it.
I also tried to Run REGEDIT. Go to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}
and delete MasterIdDataChecksum or SlaveIdDataChecksum, and reboot, but even that doesnt work. All my drives/devices are presently in PIO mode.
Please help me.
Thanking in advance.
|
|
neelrup
Newbie
|
27. April 2006 @ 05:18 |
Link to this message
|
Sorry, a typing error:
But I have tried all these but still both my IDE Channels have PIO settings. I have the hard-dsk (master) and a Samsung DVD ROM (slave) in Primary IDE and LG DVD Burner (master) and Samsung CDRW (slave) in Secondary IDE. I am going crazy with this as when I burn DVD-R (8x), it burns only at 1x, taking 50 mints to burn 4 GB data.
|
|
coaxper
Suspended permanently
|
1. May 2006 @ 01:04 |
Link to this message
|
|
PLease help. I have been burnin dvds for long time. I have been using dvd descrypter to put it on PC. and then with shrink burned it. But now my shrink it says backed up successfully but at the end i try the dvd it is not burned. USually when the rom opens it is burned but most of the times it doesnt open. anyone can tell me how to burn anyother way or suggestions would be great. by the way it works sometimes and the other times it doesnt...
|
|
botski
Inactive
|
2. May 2006 @ 15:57 |
Link to this message
|
|
Alkohol, I'm a newbie and came across this site - now addicted. Great information. I wanted to increase my back-up speed and tried your DMA guide. The guide states either Primary/Secondary IDE Channel. My laptop only has a Primary IDE Controller, no secondary, and already set to "DMA if available". Other controllers in the IDE menu include:
Intel(R) 8280 IG (1CH7 Family) Ultra ATA Storage Controllers-27DF
Intel(R) 8280 IGBM SATA AHCI Controller.
How can I increase my back-up speed, currently between 30min. to 80min.
Laptop details
HP
Genuin Intel(R) CPU T2300 @ 1.66GHz
980MHz, 512MB of RAM
OS-Windows XP Professional SP2
DVD- HL-DT-ST DVDRAM GSA-4084N
Thanks
botski (from OZ)
|
|
novicebb
Member
|
27. June 2006 @ 20:22 |
Link to this message
|
|
I followed Alkohol's guide and in transfer mode for both my Primary and Secondary Channel is "DMA if available" but in current transfer mode it is "not available" when I click on primary IDE channel. But when I click on the secondary channel in advance settings the primary drive current transer mode is "PIO" even though the transfer mode is "DMA if available". Secondary channel is "Ultra DMA mode 2". Could this also be why my Primary drive is having issues with writing to cd-r disks after only 7% completion?
This message has been edited since posting. Last time this message was edited on 27. June 2006 @ 20:37
|
|
niddubtuq
Junior Member
|
15. July 2006 @ 04:16 |
Link to this message
|
|
|
|
Advertisement
|
|
|
AfterDawn Addict
|
15. July 2006 @ 04:21 |
Link to this message
|
|
As pointed out in your other thread your HP DVD Driver DMA is OFF it needs to be ON.
|
|
