|
|
|
DVD fab platinum and Nero 7 burning process fail
|
|
|
etsagr
Newbie
|
8. March 2007 @ 07:36 |
Link to this message
|
THanks.
All of the audio files in the Extras are checked off (i.e. Dolby Digital 5.1, 2 channel, etc.). While some of them play sound, others do not (even though I know that they have sound b/c it is a trailor or the director's commentary). The files that do not play sound do have a file size - i.e. 14 MB. So, I can't figure out if there seems to be a file, why there is no sound when I preview it? And when I end up burning to a DVD, there is no sound as well - so the preview is definitely accurate in telling me if the burned DVD will have sound in the extras. And again, it burns properly (w/ sound) if I use DVD Fab - but as I said, I prefer to use Nero for burning
|
|
Advertisement
|
|
|
|
Moderator
|
8. March 2007 @ 14:52 |
Link to this message
|
|
Ok make sure there are check marks next to all the audios.
I may be misreading your post but it sounds like there is no check mark next to the audios (?)
|
|
etsagr
Newbie
|
9. March 2007 @ 12:08 |
Link to this message
|
All of the audio files ARE checked. Yet, when I preview them in the miniscreen in Nero, there is no sound from the computer. And, when I burn them using Nero, there still is no sound. However, if I use Nero to burn the same DVD movie with the extras (that was saved on the hard drive and didn't produce sound using Nero), there is sound on the actual DVD. So, I know that the sound files are saved on the computer, but it seems that Nero is not accessing them.
The audio files are listed under "Audio" and ARE ALL CHECKED. File sizes range from 1-15 MB. THere are Dolby 5.1 and 2 ch files, all which are checked.
I am getting this with almost all of the movies that I attempt to burn.
My firmware is up to date for the DVD drivers. And, I have even tried uninstalling and reinstalling Nero, along with downloading the latest updates to Nero from the Web.
|
Moderator
|
9. March 2007 @ 15:14 |
Link to this message
|
Hmmm well I'm kinda stumped. If you save them to your hard drive w/ Recode then burn them separately w/ another Nero app I can't think of any setting right now that would cause you to lose the audio w/ trying to burn directly w/ Recode.
You should be able to hear the audio when previewing in Recode.
This probably has nothing to do with no sound on the dvd but go to recode then 'configure' under the more button.
Change the audio in the preview window tab to another setting to see if you can hear the audio.
|
|
mrsurbie
Suspended due to non-functional email address
|
14. March 2007 @ 02:19 |
Link to this message
|
OK so before I really pull my hair out I followed this guide from BB something or other to the T would not let me burn so then tried with recode and this was the error file what the f**k am I doing wrong as I now have enough discs to build my own empire state building
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.7.5.1
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 7, 5, 1
Recorder: <HL-DT-ST DVDRRW GWA-4166B>Version: 1I24 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4166B atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3160023AS atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4166B E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 187MB (191828kB)
Memory in use : 63
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.3.2007
NeroAPI
10:04:59 PM #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started
10:04:59 PM #2 Phase 114 File APIProgress.cpp, Line 285
DVD-Video files reallocation completed (no file modified)
10:04:59 PM #3 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
10:04:59 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:04:59 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)
10:04:59 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)
10:04:59 PM #7 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media
10:04:59 PM #8 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1981295 (440:17.20, 3869MB)
10:04:59 PM #9 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
10:04:59 PM #10 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: HL-DT-ST DVDRRW GWA-4166B, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
10:04:59 PM #11 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:04:59 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1981296 (1981296) = #1981296/440:17.21
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1981296 blocks [E: HL-DT-ST DVDRRW GWA-4166B]
--------------------------------------------------------------
10:04:59 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [E: HL-DT-ST DVDRRW GWA-4166B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4057694208, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1981296 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1981296 | 0 | 0x00
1981296 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
10:04:59 PM #14 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:04:59 PM #15 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
10:05:00 PM #16 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.
10:05:00 PM #17 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
10:05:00 PM #18 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 4x (5,540 KB/s)
10:05:00 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:05:00 PM #20 Text 0 File Cdrdrv.cpp, Line 9285
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY....
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8
23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
10:05:00 PM #21 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
10:06:02 PM #22 SPTI -1093 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 A4 A0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 02
Buffer x1d541280: Len x10000
0x00 00 01 BA 44 1A 25 F9 6D AD 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 B0 21 1A 75 C4 14 A8 CD B2
0x46 01 6C 04 30 74 78 99 AE 21 B5 E3 97 3D AF 8F
10:06:02 PM #23 CDR -1093 File Writer.cpp, Line 301
No seek complete
E: HL-DT-ST DVDRRW GWA-4166B
10:06:02 PM #24 Phase 127 File APIProgress.cpp, Line 285
Generating DVD high compatibility borders
10:06:03 PM #25 Phase 129 File APIProgress.cpp, Line 285
Generating DVD borders completed successfully
10:06:03 PM #26 Phase 38 File APIProgress.cpp, Line 285
Burn process failed at 4x (5,540 KB/s)
10:06:03 PM #27 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:06:09 PM #28 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed
10:06:10 PM #29 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 26/01/2005 10:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
AfterDawn Addict
|
14. March 2007 @ 08:35 |
Link to this message
|
Hello mrsurbie,
I am probably the bb something or another you are talking about ;-) Anyway which guide did you use to try and copy your movie? Also what movie is this you are trying to do?
I would recommend you use this guide Ripit4Me this is the most succesful guide by far for most people here. The features you like in Recode are also in DVDShrink which is used in this guide. I have a feeling your method might not be the best choice here. Even if you still want to use recode instead of Shrink you can still do that after letting RipIt4Me copy your DVD to your hard drive. You are also not using very good media to burn to those Sony discs have been giving people fits lately.
Cheers
My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm |
|
mrsurbie
Suspended due to non-functional email address
|
14. March 2007 @ 13:31 |
Link to this message
|
|
Hi bbmayo
Thanks for taking the time to read my waffle and sorry if I sound frustrated, but well I am! I was using your guide for dvd fab and shrink, all went fine until the end it would not burn. I then tried the guide you suggested and that seemed to be fine up until the chosing the burn option it only gave me the ISO option and no Image Burn ISO option, I did have image burn on my computer but it did not open up automatically and even if I opened the program manually it and found the file it said device/media not ready. I was only trying to make a copy of three men and a baby, the iso file seems to be on my hard disc and I can find it no problem it is the final burn part. Have been using the Sony DVD+ disc but also tried the Vertibram DVD- disc still not joy, anyhow I have unistalled everything and will reinstall from your guide again and see how I go. Thanks
|
Moderator
|
14. March 2007 @ 18:07 |
Link to this message
|
|
@mrsurbie
Check this out too.
Go to control panel>administrative tools>services. Scroll down to IMAPI CD Burning. Double click on it. If the service is started - stop it.
If it's on it can sometimes interfere w/ burning.
|
|
mrsurbie
Suspended due to non-functional email address
|
14. March 2007 @ 19:48 |
Link to this message
|
thanks tried that and it said stopped so assume that is ok am going to uninstall everything and try again, do you think I should uninstall Nero as well?? will it interfere
|
|
mrsurbie
Suspended due to non-functional email address
|
14. March 2007 @ 20:18 |
Link to this message
|
just tried to instal DVD Decrypter and this error message came up
I 15:51:26 DVD Decrypter Version 3.5.4.0 started!
I 15:51:26 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
W 15:51:26 Drive D:\ (FAT32) does not support single files > 4 GB
I 15:51:26 Initialising SPTI...
I 15:51:26 Searching for SCSI / ATAPI devices...
I 15:51:26 Found 1 DVD±RW!
it says on the 4th line warning drive d does not support single files drive d is my recovery drive would this matter?
Also when I try to install the Ain1 Installer I get the following error message
All in one installer was not been totally installed because of the following reason
canno establish a connection with data link, try again later
you will have to run this utility again to completely install All in one installer
i disabled my norton and i got further but had this error messsage
anaylasis results ad476483 the file contains invlaid data or files that could not be found
after install rip it 4 me does not open automatically
will keep trying
|
Moderator
|
15. March 2007 @ 16:07 |
Link to this message
|
|
The warning you get in decrypter is okay - the format of that drive is fat32 - meaning it doesn't support files over 4 gig. So if you were doing an iso decrypter would break it down in chunks.
You can always format it to NTFS - just back up the data on there 1st.
|
|
Marauding
Newbie
|
22. March 2007 @ 09:17 |
Link to this message
|
[14:03:12] <---MT---> 2:02:56 PM #30 Text 0 File DVDR.cpp, Line 6192
[14:03:12] <---MT---> Drive: _NEC DVD+RW ND-2100AD
[14:03:12] <---MT---> Book Type request [gen]: DVD+R, write to EEPROM
[14:03:12] <---MT---> Changing the Book Type was finished successfully, return code 0
[14:03:12] <---MT--->
[14:03:12] <---MT---> 2:02:56 PM #31 Phase 38 File APIProgress.cpp, Line 278
[14:03:12] <---MT---> Burn process failed at 4x (5,540 KB/s)
[14:03:12] <---MT--->
Im getting this error when trying to burn a dvd with Nero it gets all the way through burning and then fails im not sure what im doing wrong....
|
|
Advertisement
|
|
|
Moderator
|
22. March 2007 @ 17:18 |
Link to this message
|
|
Hi Marauding
Welcome to aD
Your best bet is to start a new thread and post the whole log - could be a few things. The whole log will help try and solve this.
Plus looks like your using Vision - this thread is about DVDFab & Nero
|
|
