|
|
|
problem burning with nero 5.5.10.7
|
|
|
bkwatkins
Newbie
|
6. July 2005 @ 16:29 |
Link to this message
|
|
this is a strange problem i've been having, and it has me stumped as to wether the cause is nero or my burner. i tried to burn a cd rom (iso) disc of mp3's the other day, but when i checked to see if it worked, both my drives said it was a blank disc. i could see where the info had been written on the bottom of the cd-r, but there was an unusually large gap of unwritten space from the center of the cd-r and where it began to write. i looked at other cd-r's i had made and the gap was not there.
so i burned a dvd-r, and it came out fine. i burned some jpegs onto another cd-r and they came out fine. i burned just a few mp3's to yet another cd-r and they came out fine. i tried to burn a multisession cd-r and the same problem occurred, but between the first session and the second session. a big gap, and my drives won't read beyond that gap to the second session. i don't know what could be causing this. i just wanted to know if anyone has experienced this problem before, if it is a laser out of alignment or a problem with nero. thanks for any help you guys can provide.
|
|
Advertisement
|
 |
|
|
Moderator
|
7. July 2005 @ 04:21 |
Link to this message
|
your Nero logfile is in c:\program files\ahead\nero\nerohistory.log if you want to paste here. All burns are appended to it so pls post last section of log MINUS the serial number which usually begins with '1A21' or similar (the serial number will help you differentiate between sections of logfile, ie sections between each burn session). The logfile should be sufficient but it might also be worth verifying one or more of your media with dvdinfopro (free download from www.dvdinfopro.com). Run the disc thru it's media info check and paste that here too..
You've probably just got some issues with your setup that need tweaking
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
bkwatkins
Newbie
|
7. July 2005 @ 06:39 |
Link to this message
|
all right. i installed dvdinfo pro and ran the problem discs through it. it tells me all these discs have "no media present" even though i can see it burned on the back.
here is the Nero log file: ( i recieved no errors from Nero, it said everything burned fine, but the cd-r won't play)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 6/12/2003 11:04:10 PM
ahead WinASPI: File 'C:\Program Files\ahead\nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 6/25/2002 6:34:54 PM
Nero Version: 5.5.10.7
Recorder: <ASUS DVD-RW DRW-0402P> Version: 1.30 - HA 1 TA 1 - 5.5.10.7
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS DVD-ROM LTD-166S>Version: DS0B - HA 1 TA 0 - 5.5.10.7
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : JLMS DVD-ROM LTD-166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-RW DRW-0402P atapi Port 1 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 104MB (107180kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
6.7.2005
CD-ROM (ISO)
11:54:56 AM #1 Text 0 File Isodoc.cpp, Line 7328
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:54:56 AM #2 Phase 90 File dlgbrnst.cpp, Line 1653
Buffer Underrun Protection activated
11:54:56 AM #3 Text 0 File Reader.cpp, Line 115
Reader running
11:54:56 AM #4 Text 0 File Writer.cpp, Line 123
Writer ASUS DVD-RW DRW-0402P running
11:54:56 AM #5 ISO9660GEN -11 File geniso.cpp, Line 4546
First writeable address = 0 (0x00000000)
11:54:56 AM #6 Text 0 File Burncd.cpp, Line 3811
Turn on Track-At-Once, using CD-R/RW media
11:54:56 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 670
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 271940 (271940) = #271940/60:25.65
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
11:55:00 AM #8 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 359846 (79:59.71)
Last address to be written: 271939 (60:27.64)
11:55:00 AM #9 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE
11:55:00 AM #10 Text 0 File DlgWaitCD.cpp, Line 1452
Recorder: ASUS DVD-RW DRW-0402P;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)
11:55:00 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 822
Prepare recorder ASUS DVD-RW DRW-0402P for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 557240320
11:55:00 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 850
Removed 2 run-out blocks from end of track 1.
11:55:00 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 670
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 271940 (271940) = #271940/60:25.65
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 271938 blocks [ASUS DVD-RW DRW-0402P]
--------------------------------------------------------------
11:55:00 AM #14 Phase 36 File dlgbrnst.cpp, Line 1653
Burn process started at 16x (2,400 KB/s)
11:55:00 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
11:55:01 AM #16 Text 0 File Mmc.cpp, Line 17311
Set BUFE: supported -> ON
11:55:05 AM #17 Text 0 File Writer.cpp, Line 314
11:55:05.317 - ASUS DVD-RW DRW-0402P : Queue again later (Intervall : 27msec)
11:55:07 AM #18 Text 0 File Writer.cpp, Line 314
11:55:07.395 - ASUS DVD-RW DRW-0402P : Queue again later (Intervall : 27msec)
11:55:07 AM #19 Text 0 File Writer.cpp, Line 314
11:55:07.630 - ASUS DVD-RW DRW-0402P : Queue again later (Intervall : 27msec)
11:58:53 AM #20 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
11:58:58 AM #21 Text 0 File Mmc.cpp, Line 12355
<ASUS DVD-RW DRW-0402P> start Close Session
11:59:03 AM #22 Text 0 File Mmc.cpp, Line 12379
Fixation : Second step for unclosed Sessions
11:59:03 AM #23 Phase 37 File dlgbrnst.cpp, Line 1653
Burn process completed successfully at 16x (2,400 KB/s)
11:59:03 AM #24 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\NeroCD2k.sys': Ver=1.0.0.9, size=44227 bytes, created 2/27/2005 1:13:17 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 6/12/2003 11:04:10 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 4:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
7. July 2005 @ 09:28 |
Link to this message
|
Quote:
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 6/12/2003 11:04:10 PM
- download latest version of ASPI layer here - http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm
Quote:
Nero Version: 5.5.10.7
- wow that's real old
Quote:
Recorder: <ASUS DVD-RW DRW-0402P> Version: 1.30
- your firmware is old (2003) but up to date. There's talk here - http://forum.rpc1.org/dl_firmware.php?download_id=1571 of using Pioneer DVR-105 firmware for this drive but i followed the link and the firmware for that seems to be dated 2002. So i'd leave this alone i guess. Just keep in mind that this drive won't recognise newer media too well
Quote:
Physical memory : 511MB (523760kB)
Free physical memory: 104MB (107180kB)
Memory in use : 79 %
- 512MB is plenty enough, but something's using most if it up. free up more by closing more applications
Quote:
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
- you're not Finalising the disc. I don't know an awful lot about multisession as did all of one multisession disc about 5yrs ago and didn't see a need for it back then.
Quote:
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)
- i'm not too hot on decoding Nero logs with regard to CD's but i'd hazard a guess that the drive doesn't like those discs
Quote:
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
- blatantly pinched this from a reply from 'binkie7' in another post - http://forums.afterdawn.com/thread_view.cfm/195031 "too much memory is already in use"
Quote:
Existing drivers:
File 'Drivers\NeroCD2k.sys': Ver=1.0.0.9, size=44227 bytes, created 2/27/2005 1:13:17 PM
- i'm not sure about this driver as i'm more familiar with versions 6.x.x.x of Nero, a quick check here states this driver is probably ok - http://www.neuber.com/taskmanager/process/nerocheck.exe.html
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
bkwatkins
Newbie
|
7. July 2005 @ 13:24 |
Link to this message
|
well, i just installed CD BURNER XP PRO 3 to give it a try and see if the problem lies with Nero. unfortunately, i got the same results with that program. gonna try and update Nero to 5.5.10.56 and quit everything but Nero to see if that helps.
is it possible i could have the laser lens out of alignment? i would think that would affect the dvd burning as well, but that is going on fine. thanks for all your help.
|
Moderator
|
7. July 2005 @ 13:29 |
Link to this message
|
i think the last update of Nero version 5 that i used previously was 5.5.10.78, but my dvd burner wasn't supported so i bought version 6.
However hardware problem is always a possibility, or a simple cleaning out of the air/cobwebs!, however don't discount the media being a cause, you would not believe how many people have so many problems due mainly to media. good luck and let us know your progress
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
bkwatkins
Newbie
|
7. July 2005 @ 14:00 |
Link to this message
|
well the new version of Nero didn't help. cleaned the laser lens too, but that didn't do a thing. i have been using memorex cd-r's i'll have to pick up some different ones tomorrow and try it then.
thanks again
|
|
Advertisement
|
|
|
Moderator
|
7. July 2005 @ 14:04 |
Link to this message
|
|
memorex = utter rubbish. buy better media :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
