Nero brurning problem after upgrade pls HELP!

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Monday 30.12.2024 / 11:03

Search AfterDawn Forums:

afterdawn.com > forums > software specific discussion > nero discussion > nero brurning problem after upgrade pls help!

Browse by topic

Forums

Start a new thread

Nero brurning problem after upgrade pls HELP!

Jump to:

Posted

Message

pw-pro

Suspended due to non-functional email address

7. July 2005 @ 08:36

Link to this message

After upgrading to NERO 6.6.0.14 I suddenly van not burn DVD's.
At the end of the buring process i get a message saying something like cant burn end-of dik at once!...

Anybody can help? What can I do? After searching for clues everywhere i finally found this forum and am in the hope somebody canhelp me here.
The log-file is like Chinese for me-and I only speak german, portuguese and some english!

Thanks in advance
Peter

Log in the following:
---------
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
Adapter driver: <a347scsi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HL-DT-ST DVDRAM GSA-4040B E: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 164MB (168420kB)
Memory in use : 65
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.7.2005
ISO compilation
18:15:00 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

18:15:00 #2 Text 0 File Reader.cpp, Line 127
Reader running

18:15:00 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

18:15:00 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

18:15:01 #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

18:15:02 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243791 (498:37.16, 4382MB)

18:15:02 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

18:15:02 #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

18:15:02 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:15:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243792 (2243792) = #2243792/498:37.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243792 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

18:15:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595286016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243792 | lead-out | 1 | 0x41 | 0x00

18:15:02 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

18:15:03 #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

18:15:03 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

18:15:03 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

18:15:03 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:15:03 #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

18:15:03 #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

18:15:03 #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

18:15:03 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:15:20 #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03580000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x32 0x4D 0x03 0x0C 0x0C 0x00

18:15:20 #22 CDR -1135 File Writer.cpp, Line 311
Write error

18:15:20 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:15:20 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

18:15:20 #25 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was -1

18:15:20 #26 CDR -1135 File WriterStatus.cpp, Line 167
Write error

18:15:20 #27 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

18:15:20 #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-0064-4034-7458-3045-5959

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
Adapter driver: <a347scsi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HL-DT-ST DVDRAM GSA-4040B E: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 123MB (126588kB)
Memory in use : 74
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.7.2005
ISO compilation
13:50:46 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13:50:47 #2 Text 0 File Reader.cpp, Line 127
Reader running

13:50:47 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

13:50:47 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

13:50:48 #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

13:50:52 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243759 (498:36.59, 4382MB)

13:50:52 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

13:50:52 #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

13:50:52 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:50:52 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243760 (2243760) = #2243760/498:36.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243760 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

13:50:52 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595220480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243760 | lead-out | 1 | 0x41 | 0x00

13:50:53 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

13:50:55 #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

13:50:55 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

13:50:55 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)

13:50:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:50:56 #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

13:50:56 #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

13:50:56 #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

13:50:56 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

13:51:01 #21 Text 0 File Cdrdrv.cpp, Line 1288
13:51:01.862 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

14:19:17 #22 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243760 (223CB0h), lenght 0 blocks

14:19:17 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14:19:17 #24 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 2243759

14:19:39 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03614C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x30 0x3C 0x00 0x0C 0x02 0x00

14:19:39 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
No seek complete

14:19:39 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
Could not perform end of Disc-at-once

14:19:39 #28 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was -1

14:19:39 #29 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
HL-DT-ST DVDRAM GSA-4040B\H1 T1

14:19:39 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

14:19:40 #31 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-0064-4034-7458-3045-5959

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
Adapter driver: <a347scsi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HL-DT-ST DVDRAM GSA-4040B E: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 153MB (156984kB)
Memory in use : 68
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.7.2005
ISO compilation
14:21:24 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:21:24 #2 Text 0 File Reader.cpp, Line 127
Reader running

14:21:24 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

14:21:24 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

14:21:25 #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

14:21:25 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243791 (498:37.16, 4382MB)

14:21:25 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

14:21:25 #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

14:21:25 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:21:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243792 (2243792) = #2243792/498:37.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243792 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

14:21:25 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595286016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243792 | lead-out | 1 | 0x41 | 0x00

14:21:25 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

14:21:27 #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

14:21:27 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

14:21:27 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)

14:21:27 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:21:27 #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

14:21:27 #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

14:21:27 #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

14:21:27 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14:21:32 #21 Text 0 File Cdrdrv.cpp, Line 1288
14:21:32.876 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

14:49:49 #22 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243792 (223CD0h), lenght 0 blocks

14:49:49 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14:49:49 #24 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 2243791

14:50:25 #25 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-0064-4034-7458-3045-5959

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
Adapter driver: <a347scsi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HL-DT-ST DVDRAM GSA-4040B E: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 169MB (173156kB)
Memory in use : 64
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.7.2005
ISO compilation
14:51:47 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:51:47 #2 Text 0 File Reader.cpp, Line 127
Reader running

14:51:47 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

14:51:47 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

14:51:48 #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

14:51:49 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243791 (498:37.16, 4382MB)

14:51:49 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

14:51:49 #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

14:51:49 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:51:49 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243792 (2243792) = #2243792/498:37.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243792 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

14:51:49 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595286016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243792 | lead-out | 1 | 0x41 | 0x00

14:51:49 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

14:51:51 #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

14:51:51 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

14:51:51 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

14:51:51 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:51:51 #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

14:51:51 #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

14:51:51 #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

14:51:51 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14:52:07 #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03FE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x32 0x4D 0x03 0x0C 0x0C 0x00

14:52:07 #22 CDR -1135 File Writer.cpp, Line 311
Write error

14:52:07 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14:52:08 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

14:52:08 #25 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was -1

14:52:08 #26 CDR -1135 File WriterStatus.cpp, Line 167
Write error

14:52:08 #27 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

14:52:08 #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-0064-4034-7458-3045-5959

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
Adapter driver: <a347scsi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HL-DT-ST DVDRAM GSA-4040B E: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 167MB (171872kB)
Memory in use : 64
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.7.2005
ISO compilation
14:54:21 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:54:22 #2 Text 0 File Reader.cpp, Line 127
Reader running

14:54:22 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

14:54:22 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

14:54:22 #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

14:54:23 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243791 (498:37.16, 4382MB)

14:54:23 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

14:54:23 #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

14:54:23 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:54:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243792 (2243792) = #2243792/498:37.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243792 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

14:54:23 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595286016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243792 | lead-out | 1 | 0x41 | 0x00

14:54:23 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

14:54:24 #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

14:54:24 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

14:54:24 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)

14:54:24 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:54:24 #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

14:54:24 #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

14:54:24 #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

14:54:24 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14:54:28 #21 Text 0 File Cdrdrv.cpp, Line 1288
14:54:28.788 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

15:22:44 #22 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243792 (223CD0h), lenght 0 blocks

15:22:44 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:22:44 #24 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 2243791

15:23:20 #25 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-0064-4034-7458-3045-5959

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
Adapter driver: <a347scsi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HL-DT-ST DVDRAM GSA-4040B E: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 136MB (140224kB)
Memory in use : 71
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.7.2005
ISO compilation
16:27:30 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

16:27:30 #2 Text 0 File Reader.cpp, Line 127
Reader running

16:27:30 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

16:27:30 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

16:27:31 #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

16:27:32 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243791 (498:37.16, 4382MB)

16:27:32 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

16:27:32 #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

16:27:32 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16:27:32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243792 (2243792) = #2243792/498:37.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243792 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

16:27:32 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595286016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243792 | lead-out | 1 | 0x41 | 0x00

16:27:32 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

16:27:33 #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

16:27:33 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

16:27:33 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)

16:27:33 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16:27:33 #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

16:27:34 #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

16:27:34 #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

16:27:34 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16:27:39 #21 Text 0 File Cdrdrv.cpp, Line 1288
16:27:39.315 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

16:55:55 #22 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243792 (223CD0h), lenght 0 blocks

16:55:55 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

16:55:55 #24 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 2243791

16:56:31 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03614C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x30 0x3C 0x00 0x0C 0x02 0x00

16:56:31 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
No seek complete

16:56:31 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
Could not perform end of Disc-at-once

16:56:31 #28 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was -1

16:56:31 #29 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
HL-DT-ST DVDRAM GSA-4040B\H1 T1

16:56:31 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

16:56:31 #31 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-0064-4034-7458-3045-5959

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
Adapter driver: <a347scsi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HL-DT-ST DVDRAM GSA-4040B E: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 158MB (162692kB)
Memory in use : 66
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.7.2005
ISO compilation
17:21:40 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

17:21:41 #2 Text 0 File Reader.cpp, Line 127
Reader running

17:21:41 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

17:21:41 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

17:21:41 #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

17:21:42 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243759 (498:36.59, 4382MB)

17:21:42 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

17:21:42 #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

17:21:42 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:21:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243760 (2243760) = #2243760/498:36.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243760 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

17:21:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595220480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243760 | lead-out | 1 | 0x41 | 0x00

17:21:42 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

17:21:43 #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

17:21:43 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

17:21:43 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)

17:21:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:21:43 #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

17:21:43 #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

17:21:43 #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

17:21:43 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:21:50 #21 Text 0 File Cdrdrv.cpp, Line 1288
17:21:50.157 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

17:50:05 #22 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243760 (223CB0h), lenght 0 blocks

17:50:05 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17:50:05 #24 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 2243759

17:50:27 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03614C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x30 0x3C 0x00 0x0C 0x02 0x00

17:50:28 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
No seek complete

17:50:28 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
Could not perform end of Disc-at-once

17:50:28 #28 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was -1

17:50:28 #29 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
HL-DT-ST DVDRAM GSA-4040B\H1 T1

17:50:28 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

17:50:28 #31 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-0064-4034-7458-3045-5959

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
Adapter driver: <a347scsi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HL-DT-ST DVDRAM GSA-4040B E: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 157MB (160852kB)
Memory in use : 67
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.7.2005
ISO compilation
18:06:08 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

18:06:08 #2 Text 0 File Reader.cpp, Line 127
Reader running

18:06:08 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

18:06:08 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

18:06:09 #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

18:06:10 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243759 (498:36.59, 4382MB)

18:06:10 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

18:06:10 #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

18:06:10 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:06:10 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243760 (2243760) = #2243760/498:36.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243760 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

18:06:10 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595220480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243760 | lead-out | 1 | 0x41 | 0x00

18:06:10 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

18:06:12 #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

18:06:12 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

18:06:12 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)

18:06:12 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:06:12 #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

18:06:12 #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

18:06:12 #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

18:06:12 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:06:17 #21 Text 0 File Cdrdrv.cpp, Line 1288
18:06:17.701 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

18:34:34 #22 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243760 (223CB0h), lenght 0 blocks

18:34:34 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:34:34 #24 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 2243759

18:35:17 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03614C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x30 0x3C 0x00 0x0C 0x02 0x00

18:35:17 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
No seek complete

18:35:17 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
Could not perform end of Disc-at-once

18:35:17 #28 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was -1

18:35:17 #29 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
HL-DT-ST DVDRAM GSA-4040B\H1 T1

18:35:17 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

18:35:17 #31 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-0064-4034-7458-3045-5959

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
Adapter driver: <a347scsi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HL-DT-ST DVDRAM GSA-4040B E: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 143MB (146664kB)
Memory in use : 70
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.7.2005
ISO compilation
11:14:06 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:14:07 #2 Text 0 File Reader.cpp, Line 127
Reader running

11:14:07 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

11:14:07 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

11:14:07 #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

11:14:08 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243759 (498:36.59, 4382MB)

11:14:08 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

11:14:08 #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

11:14:08 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:14:08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243760 (2243760) = #2243760/498:36.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243760 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

11:14:08 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595220480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243760 | lead-out | 1 | 0x41 | 0x00

11:14:08 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:14:10 #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

11:14:10 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:14:11 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)

11:14:11 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:14:11 #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

11:14:11 #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

11:14:11 #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

11:14:11 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:14:17 #21 Text 0 File Cdrdrv.cpp, Line 1288
11:14:17.493 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

11:42:34 #22 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243760 (223CB0h), lenght 0 blocks

11:42:34 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:42:34 #24 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 2243759

11:43:18 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03664C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x30 0x3C 0x00 0x0C 0x02 0x00

11:43:18 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
No seek complete

11:43:18 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
Could not perform end of Disc-at-once

11:43:18 #28 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was -1

11:43:18 #29 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
HL-DT-ST DVDRAM GSA-4040B\H1 T1

11:43:18 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

11:43:19 #31 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-0064-4034-7458-3045-5959

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 0 - 6.6.0.14
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B D: CDRom0
HL-DT-ST DVDRAM GSA-4040B E: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 167MB (171624kB)
Memory in use : 65
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.7.2005
ISO compilation
16:22:54 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

16:22:55 #2 Text 0 File Reader.cpp, Line 127
Reader running

16:22:55 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4040B running

16:22:55 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

16:22:56 #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

16:22:56 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243871 (498:38.21, 4382MB)

16:22:56 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO

16:22:56 #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

16:22:56 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16:22:56 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243872 (2243872) = #2243872/498:38.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243872 blocks [HL-DT-ST DVDRAM GSA-4040B]
--------------------------------------------------------------

16:23:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595449856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243872 | lead-out | 1 | 0x41 | 0x00

16:23:13 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

16:23:15 #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

16:23:15 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

16:23:15 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)

16:23:16 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16:23:16 #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

16:23:16 #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

16:23:16 #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

16:23:16 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16:23:21 #21 Text 0 File Cdrdrv.cpp, Line 1288
16:23:21.805 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

16:51:38 #22 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243872 (223D20h), lenght 0 blocks

16:51:39 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

16:51:39 #24 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 2243871

16:52:01 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03614C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x30 0x3C 0x00 0x0C 0x02 0x00

16:52:01 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
No seek complete

16:52:01 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
Could not perform end of Disc-at-once

16:52:01 #28 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was -1

16:52:01 #29 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
HL-DT-ST DVDRAM GSA-4040B\H1 T1

16:52:01 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

16:52:01 #31 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

[ + quote]

creaky

Moderator

7. July 2005 @ 12:43

Link to this message

i got your logfile in notepad, but as the log is appended to each burn, you have a few logs of different burns. the big problem there is your serial number is on display -

Quote:
====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-*********************.

- EDIT OUT the serial numbers, even edit leaving just the last section of log, each section is preceded by the above lines, by now someone will have stolen your serial number.

will report back when ive digested your logfile..

[ + quote]

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

creaky

Moderator

7. July 2005 @ 13:02

Link to this message

LMAO, i only speak Nero and English !

Quote:
====== *** Nero-Burning Rom, History File *** ======
Peter Winter
SkyWatch, Lda.
1A23-****************

- as i mentioned before, edit out all references to your serial number, beginning with 1A23-*

Quote:
Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300

- version A302 (dateed 2003) firmware for your burner is here - http://forum.rpc1.org/dl_firmware.php?download_id=1628 (there's also A303 and A304 listed there but they don't seem to exist at the links specified. Trouble is that if the firmware really is that old, your drive will have trouble with lots of modern media

Quote:
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

- fix your DMA settings with info from here - http://home.comcast.net/~bbmayo/FAQ.htm

Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243871 (498:38.21, 4382MB)

- seems you've previously set the target size to this level in DVD Shrink, OR you've repeatedly tried to burn the same movie. If you haven't set the target size, make sure to do it, thus avoiding outer edge of discs

Quote:
Disc Manufacturer: -
Disc Application Code: 64, Disc Physical Code: 193

- your drive can't recognise that media

Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)

No seek complete

EndDAO: Last written address was -1

Invalid write state

- drive isn't happy with that media

Quote:
Simulation failed at 2x (2,770 KB/s)

- nice one, you're not watsing disks this way

Quote:
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)

- that's not right; if doing the DMA thing above doesn't help change this, reinstall the correct drivers

[ + quote]

pw-pro

Suspended due to non-functional email address

8. July 2005 @ 00:06

Link to this message

Hi Creaky B
Thank's a lot for your attention will be working on your advices soon.
But please explain one thing - if possible?
How come that a simple update of Nero can bring this problems - no drivers - nothing else was changed! just simply downloaded upgrade and overinstalled it!

Peter
______
seems you've previously set the target size to this level in DVD Shrink, OR you've repeatedly tried to burn the same movie. If you haven't set the target size, make sure to do it, thus avoiding outer edge of discs
+++++++
Yes I tried to burn the same files (not a moive but simply some hundred Photo-Raw files) with different settings in the ISO dialog as I sought this might be the problem!

What do you mean with "set the target size" how do I do this?
Sorry about this but as you can obviously see I dont speak Nero I am just a Photographer copying his Photos for Bkup reasons to DVD's and this various times daily. What I do normally is simply copying as many files as possible to the compilation untill reaching near the read line (which is set to 4450 MB) - I know there is a way to change this - is this what you mean with "change target size"?

Peter

[ + quote]

pw-pro

Suspended due to non-functional email address

8. July 2005 @ 00:13

Link to this message

One other thing:
The DVD's I use and used for the last weeks at least are the following:
EMTEC DVD-R 4.7GB 120Min 1-4x vertified
and
PROSTORE DVD-R 4x 4.7GB
and
MITSAI DVD-R 1x-4x

I just by the cheapest there is always and within the last months and may be around 100 burned DVD'a I never had a single problem! - this untill jesterday and upgrading NERO

Peter

[ + quote]

creaky

Moderator

8. July 2005 @ 00:16

Link to this message

Hi, with stuff like Nero logs, i report on what i see, that's all. DVD burning is not an exact science, you would not believe how many posts i get thru a night, with a lot of the same old problems. One of the biggest causes of problems is duff media, but the same type of problems in people's setups, ie DMA, firmware etc make burning a frustrating experience for people, and it's something that can work for 100s of burns then not work at all

[ + quote]

creaky

Moderator

8. July 2005 @ 00:20

Link to this message

as to using cheapest (crappiest!) media, see the 2nd link in my signature, then skim-thru the 1st link, to see how you 100s of crap discs can seem to work for ages then give problems later. It really is a false economy to buy crap media, that one you can most definitely trust me on. I personally wasted a lot of money and time due to bad media, now i don't have burning problems so spend a lot of time helping persuade people to get off the bad media.
As i say in my sig -

Quote:
Verbatim DataLifePlus & a few Taiyo Yuden (TYG02) are the ONLY media allowed near my Burners.

Quote:
..Newbies pls see this - cheapy media is BAD.....

Quote:
..Memorex/CMC - don't let them near your Burner.....

[ + quote]

Start a new thread


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.