|
|
|
command sequence error
|
|
|
mr_dvd
Newbie
|
7. July 2005 @ 18:13 |
Link to this message
|
|
I'm getting an error using nero while burning DVD's my burner worked fine for a week and then I started getting errors.
here is the log of loghistory I'll appreciate any help.. thanx
7:00:26 PM #42 Text 0 File DVDMinusRW.cpp, Line 541
EndTrack 2: Last written address was 12431
7:00:26 PM #43 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12448): write at #12448
7:00:26 PM #44 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode for Multisession
7:00:26 PM #45 Text 0 File Mmc.cpp, Line 20660
Set BUFE: Super Link -> ON
27:00:26 PM #46 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 12448
DVD high compatibility mode: No
7:00:26 PM #47 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:00:26 PM #48 SCSI -1023 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0xD0 0xA0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
7:00:26 PM #49 CDR -1023 File ThreadedTransferInterface.cpp, Line 1799
Command sequence error
7:00:26 PM #50 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 1799
Could not perform StartTrack
7:00:26 PM #51 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x64 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
7:00:26 PM #52 CDR -1066 File WriterStatus.cpp, Line 245
Invalid field in command
7:00:26 PM #53 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation
7:00:26 PM #54 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation
7:00:26 PM #55 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x00 0x00 0x00 0xE4 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
7:00:26 PM #56 CDR -1066 File WriterStatus.cpp, Line 245
Invalid field in command
7:00:26 PM #57 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation
7:00:26 PM #58 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
7:00:26 PM #59 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
Advertisement
|
 |
|
|
|
mr_dvd
Newbie
|
7. July 2005 @ 19:49 |
Link to this message
|
|
can anyone please help me?
|
AfterDawn Addict
|
8. July 2005 @ 04:03 |
Link to this message
|
You need to give a little more information, your Nero log is not complete, it does not show your drive, settings, or what media you are using.
Quote:
my burner worked fine for a week
Is this a new burner? What media are you using?
|
|
mr_dvd
Newbie
|
8. July 2005 @ 09:47 |
Link to this message
|
yeah this is a new burner,,,,it worked fine for a week...I assume by media you mean the kind of disks I'm using? (I'm using both -r and rw disks) here is the full log from Nero..
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
singh
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
(Nero Express)
Recorder: <DVDRW IDE 16X> Version: A082 - HA 0 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE 16X >Version: A082 - HA 0 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW IDE 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 63MB (64636kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.7.2005
Burn DVD Image
10:53:37 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
10:53:37 PM #2 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE 16X running
10:53:37 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as TAO.
MTYP: Mediumtype = DVD-R/RW (0x6)
Image file name: <C:\Documents and Settings\sohan\My Documents\My Pictures\image_original\Image_original.nrg>
10:53:37 PM #4 Text 0 File Burncd.cpp, Line 3230
Turn on Track-At-Once, using DVD-R/RW media
11:22:43 PM #5 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2228607 (495:14.57, 4352MB)
11:22:43 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
11:22:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: DVDRW IDE 16X, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
11:22:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not empty. Insert empty disc.
(Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)
This disc is not empty.
(Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)
Disc was erased successfully.
Accessing disc...
(Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)
11:22:43 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 12288 (12288) = #12288/2:43.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12272 blocks [DVDRW IDE 16X]
1: TRM_DATA_MODE1 (2 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #12288 + 160 (160) = #12448/2:45.73
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 144 blocks [DVDRW IDE 16X]
2: TRM_DATA_MODE1 (3 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #12448 + 2216112 (2216112) = #2228560/495:14.10
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2216096 blocks [DVDRW IDE 16X]
3: TRM_DATA_MODE1 (4 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #2228560 + 32 (32) = #2228592/495:14.42
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [DVDRW IDE 16X]
4: TRM_DATA_MODE1 (5 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #2228592 + 16 (16) = #2228608/495:14.58
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [DVDRW IDE 16X]
--------------------------------------------------------------
11:22:43 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVDRW IDE 16X] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 5:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 25165824, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 25165824 25165824 25493504, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 25493504 25493504 4564090880, ISRC ""
4: TRM_DATA_MODE1, 2048/0x00, FilePos 4564090880 4564090880 4564156416, ISRC ""
5: TRM_DATA_MODE1, 2048/0x00, FilePos 4564156416 4564156416 4564189184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
12288 | 2 | 0 | 0x41 | 0x00
12288 | 2 | 1 | 0x41 | 0x00
12448 | 3 | 0 | 0x41 | 0x00
12448 | 3 | 1 | 0x41 | 0x00
2228560 | 4 | 0 | 0x41 | 0x00
2228560 | 4 | 1 | 0x41 | 0x00
2228592 | 5 | 0 | 0x41 | 0x00
2228592 | 5 | 1 | 0x41 | 0x00
2228608 | lead-out | 1 | 0x41 | 0x00
11:22:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 16 run-out blocks from end of track 1. Length: 12288 -> 12272.
11:22:43 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 16 run-out blocks from end of track 2. Length: 160 -> 144.
11:22:43 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 16 run-out blocks from end of track 3. Length: 2216112 -> 2216096.
11:22:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 16 run-out blocks from end of track 4. Length: 32 -> 16.
11:22:43 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:22:44 PM #16 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.
11:22:44 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:22:44 PM #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
11:22:44 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:22:44 PM #20 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode for Multisession
11:22:44 PM #21 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Super Link -> ON
11:22:44 PM #22 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: No
11:22:44 PM #23 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:22:45 PM #24 Text 0 File Cdrdrv.cpp, Line 1288
23:22:45.998 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:48 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.607 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:48 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.638 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:48 PM #27 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.670 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:48 PM #28 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.701 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:48 PM #29 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.732 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:48 PM #30 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.763 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:48 PM #31 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.795 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:48 PM #32 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.826 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:48 PM #33 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.857 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:48 PM #34 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.888 - DVDRW IDE 16X\H0 T1 : Queue again later
11:22:57 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:22:59 PM #36 Text 0 File DVDMinusRW.cpp, Line 516
EndTrack 1: Last written address was 12271
11:22:59 PM #37 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #12288): write at #12288
11:22:59 PM #38 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode for Multisession
11:22:59 PM #39 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Super Link -> ON
11:22:59 PM #40 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 12288
DVD high compatibility mode: No
11:22:59 PM #41 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:22:59 PM #42 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:23:02 PM #43 Text 0 File DVDMinusRW.cpp, Line 516
EndTrack 2: Last written address was 12431
11:23:02 PM #44 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12448): write at #12448
11:23:02 PM #45 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode for Multisession
11:23:02 PM #46 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Super Link -> ON
11:23:02 PM #47 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 12448
DVD high compatibility mode: No
11:23:02 PM #48 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:23:02 PM #49 SCSI -1023 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0xD0 0xA0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
11:23:02 PM #50 CDR -1023 File ThreadedTransferInterface.cpp, Line 2050
Command sequence error
11:23:02 PM #51 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 2050
Could not perform StartTrack
11:23:02 PM #52 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x74 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
11:23:02 PM #53 CDR -1066 File WriterStatus.cpp, Line 249
Invalid field in command
11:23:02 PM #54 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
11:23:02 PM #55 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
11:23:02 PM #56 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x00 0x00 0x00 0xF4 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
11:23:02 PM #57 CDR -1066 File WriterStatus.cpp, Line 249
Invalid field in command
11:23:02 PM #58 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
11:23:02 PM #59 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
mr_dvd
Newbie
|
8. July 2005 @ 11:16 |
Link to this message
|
|
bump???
|
|
BTFSB
Junior Member
|
8. July 2005 @ 19:30 |
Link to this message
|
|
Try slowing down your burn speed to 4x and see what happens
|
|
mr_dvd
Newbie
|
8. July 2005 @ 21:56 |
Link to this message
|
|
it does the same thing....
|
|
mr_dvd
Newbie
|
8. July 2005 @ 21:56 |
Link to this message
|
|
when I slow down the burn speed it still errors out....
|
Moderator
|
9. July 2005 @ 04:46 |
Link to this message
|
|
@mr_dvd - first of all - edit your posts and BLANK OUT your serial number before it gets stolen. i've got your logfile in notepad and will see what falls out the bottom. be right back....
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Moderator
|
9. July 2005 @ 05:10 |
Link to this message
|
Quote:
1A20-**********************
- EDIT OUT your serial number
Quote:
Recorder: <DVDRW IDE 16X> Version: A082
- exactly which drive have you got, "DVDRW IDE 16X" is very generic and various manufacturers make this drive...
Quote:
Physical memory : 255MB (261616kB)
Free physical memory: 63MB (64636kB)
Memory in use : 75
- your running out of memory, and will be using virtual memory thus your hard disc will start 'swapping' and interfering with burning
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2228607 (495:14.57, 4352MB)
- this movie is fine, but in case you hadn't set it previously, go into DVD Shrink's preferences and set target size to 4300MB, thus avoiding the outer edge of future discs.
Quote:
Command sequence error
Could not perform StartTrack
Invalid field in command
Could not perform Fixation
falling back to disc fixation
- update the firmware and try again
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP)
- uninstall Nero, uninstall it completely using Nero's 'Clean Tools', then reinstall WITHOUT Nero'd InCD - this packet writing software tends to interfere with standard Burning Rom
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 20. September 2005 @ 23:06
|
|
Advertisement
|
|
|
Moderator
|
20. September 2005 @ 23:06 |
Link to this message
|
|
bump
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
