|
|
|
Solve the mystery of this log file...
|
|
|
wolf71
Newbie
|
8. July 2005 @ 10:42 |
Link to this message
|
|
My Sony DVDRW D56A for some reason burns CDRs, but not DVDRs. My friend told me I should change my media brand, so I switched from Memorex to TDK DVDRs, yet... the problem still persists.
This is where in the log file the problems start happening:
From Nero soft:
:36:52 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
9:36:53 AM #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.
9:36:53 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
9:36:53 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
9:36:53 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:36:53 AM #17 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: TDK.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 54 44 4B 00 00 - 00 00 00 30 30 33 00 38 ...TDK.....003.8
23 54 37 12 02 4A 73 02 - 9C 6E 15 15 0B 0B 08 08 #T7..Js..n......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
9:36:53 AM #18 Text 0 File DVDPlusRW.cpp, Line 655
Start write address at LBA 0
DVD high compatibility mode: Yes
9:36:55 AM #19 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BA70000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
9:36:55 AM #20 CDR -400 File Writer.cpp, Line 311
Unspecified target error
9:36:55 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:36:55 AM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:36:56 AM #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
9:36:56 AM #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
9:36:56 AM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 12:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 8:59:44 PM (Adapter driver for rec)
File 'Drivers\Vax347s.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 9:33:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
From Alchol 120:
09:38:25 (D:) SONY DVD+-RW DW-D56A(1:0): Recording Method/Speed
09:38:25 Recording - DVD DAO - 2.3X (3185 KB/Sec)
(D:) SONY DVD+-RW DW-D56A(1:0) - Media format: DVD+R
09:38:25 (D:) SONY DVD+-RW DW-D56A(1:0) - [Write ERROR] LBA: 0, Length: 16
S:KEY - 05/27/00 - "Undocumented Error Message!"
09:38:25 (D:) SONY DVD+-RW DW-D56A(1:0): Recording failed!
09:38:25 Error message: [05/27/00] - Undocumented Error Message!
09:38:25 (D:) SONY DVD+-RW DW-D56A(1:0): Recording failed!
09:38:25 Image file loading aborted!
Anybody have any ideas? I haven't upgraded the firmware, but I hear that the PSD6 verison firmware is really shotty for this optical drive.
|
|
Advertisement
|
 |
|
|
|
wolf71
Newbie
|
8. July 2005 @ 13:37 |
Link to this message
|
|
bump
anybody?
|
AfterDawn Addict
|
8. July 2005 @ 13:57 |
Link to this message
|
are you sure this is a dvd burner,and if it is,are you sure it can write dvd+r,?????
open DVD Decrypter,....tools>drive>capabilities
|
AfterDawn Addict
|
8. July 2005 @ 14:03 |
Link to this message
|
|
It would be a bit easier if you included the entire log file. Problems often start a lot farther back than the one you posted. There is also a lot of system information, program settings etc that is helpful.
|
|
squizzle
AfterDawn Addict
|
8. July 2005 @ 14:05 |
Link to this message
|
can you post the rest of the Nero log? Sometimes that will contain important information too.
Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html
My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle
|
AfterDawn Addict
|
8. July 2005 @ 17:57 |
Link to this message
|
|
@squzzle,
Great minds do think alike!
|
|
squizzle
AfterDawn Addict
|
8. July 2005 @ 18:09 |
Link to this message
|
|
haha nice one fasfrank. This isn't the first time we've done this...
Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html
My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle
|
Moderator
|
9. July 2005 @ 00:36 |
Link to this message
|
i've got your backs lol
Nero logfile is in c:\program files\ahead\nero\nerohistory.log. Only post last section, it's 'sectioned' via these lines - '====== *** Nero-Burning Rom, History File *** ======'
DO NOT post your serial number, it's a line or 2 beneath that header line, usually beginning with '1A21' or similar...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
colir
Newbie
|
21. July 2005 @ 08:50 |
Link to this message
|
hello!
i have SONY DW-D56A, but i have firmware from DELL PSD 7 and i have the same problem but i have another DVD's.
My log is:
Quote:
13:01:25 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4636606464, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2263968 | lead-out | 1 | 0x41 | 0x00
13:01:25 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
13:01:25 #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
13:01:25 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
13:01:25 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2,4x (3 324 KB/s)
13:01:25 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:01:25 #17 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: Plasmon1
Media type ID: C01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 50 6C 61 73 6D - 6F 6E 31 43 30 31 00 38 ...Plasmon1C01.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
13:01:25 #18 Text 0 File DVDPlusRW.cpp, Line 663
Start write address at LBA 0
DVD high compatibility mode: Yes
13:01:28 #19 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03940000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
13:01:28 #20 CDR -400 File Writer.cpp, Line 311
Unspecified target error
13:01:28 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:01:29 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
13:01:29 #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
13:01:29 #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
13:01:29 #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2,4x (3 324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2005-03-12 00:28:13 (Prassi/
Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-08-03 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I tested my driver by DVD Decoder and results is here:
i tride to change to firmware SONY (this newest) but flasher show me error. PLEASE HELP ME!!!!
This is how you remind me...
This message has been edited since posting. Last time this message was edited on 21. July 2005 @ 08:51
|
Moderator
|
21. July 2005 @ 09:26 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
21. July 2005 @ 09:36 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 21. July 2005 @ 09:38
|
Moderator
|
21. July 2005 @ 09:37 |
Link to this message
|
|
that's the exact same thing i just found too..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
21. July 2005 @ 09:39 |
Link to this message
|
|
This media is not one I would buy, even Memorex looks better.
|
Moderator
|
21. July 2005 @ 09:43 |
Link to this message
|
|
lmao it must be bad then.
@colir - try better media
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
21. July 2005 @ 09:45 |
Link to this message
|
|
echo that!
|
AfterDawn Addict
|
22. July 2005 @ 14:17 |
Link to this message
|
The only odd thing I see is that it only took two seconds after the start of the burn to come up with that unspecified target error usually bad media will at least get through the lead in... This media is so bad that Nero could not even start the OPC.
Nero did manage to:
13:01:29 #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
13:01:29 #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
Thus insuring that this disc will never be written to again.
Nero could probabbly stop the write process if it knows that an error has occured. But no, it has to turn it into a coaster!
|
Moderator
3 product reviews
|
22. July 2005 @ 19:05 |
Link to this message
|
|
LMFAO @ Coaster being a clickable link to find out jargonisms !; )
*Moving thread to Nero Forum*
This message has been edited since posting. Last time this message was edited on 22. July 2005 @ 19:05
|
AfterDawn Addict
|
22. July 2005 @ 19:08 |
Link to this message
|
Quote:
such disc just creates an excellent, shiny coaster to use with your latenight pint.
Lol, think I will burn me a few right now, pints that is.
|
Moderator
|
23. July 2005 @ 01:54 |
Link to this message
|
@arniebear - good one
@herbsman - cool, about coaster being clickable. shame it doesn't pop up a big wavy hand saying 'hope you're not using crap media'
:)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
colir
Newbie
|
23. July 2005 @ 03:04 |
Link to this message
|
|
this dvd's is production for world mark - vobis. this disc is very cheap - in poland 0,99 PLN this is 0.2934$ or 0.2409 ?. but i don't thinkin' that there is discs problem. maybe this is firmware, but i have newest DELL firmware for SONY burner. i will try burn on better discs (maybe TDK or sth better). so who help me???
This is how you remind me...
|
Moderator
|
23. July 2005 @ 03:07 |
Link to this message
|
|
you're gonna have to try better discs
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
colir
Newbie
|
23. July 2005 @ 03:16 |
Link to this message
|
Quote:
wolf71
My Sony DVDRW D56A for some reason burns CDRs, but not DVDRs. My friend told me I should change my media brand, so I switched from Memorex to TDK DVDRs, yet... the problem still persists.
i have the same problem!
This is how you remind me...
This message has been edited since posting. Last time this message was edited on 23. July 2005 @ 03:17
|
Moderator
|
23. July 2005 @ 03:27 |
Link to this message
|
|
yes but with TDK for instance, they use differing quality of manufacturers - TDK are only any good if you buy the right ones and people are always caught out with the bad ones, this is one reason why i don't use/recommend TDK
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 23. July 2005 @ 03:28
|
|
Advertisement
|
|
|
Moderator
3 product reviews
|
23. July 2005 @ 17:57 |
Link to this message
|
Always worth spending a bit more for reliable media I've found throughout the years I have been burning.
A good Ritek G05 DVD-R or best of all Taiyo Yuden DVD-R , if there's a problem burning to a TY disc then there really is a hardcore problem (definitely not media related then I'd say).
|
|
