|
|
|
Nero won't copy dvd
|
|
|
googin
Suspended due to non-functional email address
|
9. July 2005 @ 15:05 |
Link to this message
|
|
This is my first post, and I see I already made a mistake, by not saving the Nero error msg. I printed it instead. Anyway, I've been trying to copy an unencrypted dvd. I've made three coasters. I'm using Nero 6.X, updated to the latest version. Lite On burner, XP. Media tried has been Phillips, Princo, and Teon. It says burning failed at 4X. It gets about two thirds through before stopping. I even tried running it through dvdshrink, and shrink stops after it encodes 68%. It doesn't give an error msg, just stops. What other info do you need, or do I need from you experts?
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
9. July 2005 @ 15:53 |
Link to this message
|
|
Try switching to some good media. Try Taiyo Yuden, Verbatim or Ritek. Burns that fail after the burn has been in progress for a few minutes are almost always media related. Post a burn log if you can. Make sure you edit out your Nero serial number. It's near the top and starts with 1a23 or something like that.
Nero stores all the error logs so you can still retrieve it. I just can't remember the location...Maybe Creaky will see this and help. I'll go look and if I figure it out I'll let you know.
This message has been edited since posting. Last time this message was edited on 9. July 2005 @ 15:55
|
AfterDawn Addict
|
9. July 2005 @ 16:04 |
Link to this message
|
|
Go into My Computer, Program Files, Ahead, Nero and the look for the Nero History. Cut and paste your log.
This message has been edited since posting. Last time this message was edited on 9. July 2005 @ 16:06
|
AfterDawn Addict
|
9. July 2005 @ 16:06 |
Link to this message
|
Nero stores the log file here:
c:\program files\ahead\nero\nerohistory.log
If you have Nero installed on a different drive letter then look in that one instead of c:\.
|
AfterDawn Addict
|
9. July 2005 @ 16:06 |
Link to this message
|
Nero stores the log file here:
c:\program files\ahead\nero\nerohistory.log
If you have Nero installed on a different drive letter then look in that one instead of c:\.
|
AfterDawn Addict
|
9. July 2005 @ 16:11 |
Link to this message
|
|
Howdy arniebear,
Thanks for jumping in with the location. I always forget where that is. Mine is on my f:\ drive of all places, no wonder I couldn't find it.
|
AfterDawn Addict
|
9. July 2005 @ 16:22 |
Link to this message
|
No problem, Nero has got log files all over the place for all it apps it's a wonder anyone can find them.
|
|
googin
Suspended due to non-functional email address
|
9. July 2005 @ 16:37 |
Link to this message
|
Here is the log file:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS0C - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <IDE DVD-ROM 16X >Version: 3.10 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120023A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-851S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-851S G: CDRom0
IDE DVD-ROM 16X H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 364MB (373696kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.7.2005
DVD-Copy on the fly
3:42:04 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
3:42:04 PM #2 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW LDW-851S running
3:42:04 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x04 Start 0 Len 1515088 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
3:42:04 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1515088 = 1515088, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
3:42:04 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
3:42:04 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1515087 (336:41.12, 2959MB)
3:42:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
3:42:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193
3:42:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:42:04 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1515088 (1515088) = #1515088/336:41.13
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1515088 blocks [LITE-ON DVDRW LDW-851S]
--------------------------------------------------------------
3:42:04 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW LDW-851S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3102900224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1515088 | lead-out | 1 | 0x41 | 0x00
3:42:04 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
3:42:04 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
3:42:04 PM #14 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
3:42:04 PM #15 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
3:42:04 PM #16 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
3:42:04 PM #17 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:42:27 PM #18 Text 0 File Cdrdrv.cpp, Line 1288
15:42:27.453 - LITE-ON DVDRW LDW-851S\H1 T0 : Queue again later
3:52:56 PM #19 SCSI -1093 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0A337000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x16 0x19 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
3:52:57 PM #20 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
3:52:57 PM #21 Text 0 File Reader.cpp, Line 385
Exception value: -1093
3:53:11 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:53:11 PM #23 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 1448255
3:53:33 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.14, size=68608 bytes, created 1/27/2002 12:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.13b, size=20576 bytes, created 7/27/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
I have some Sony blanks. Think they will work any better?
|
AfterDawn Addict
|
9. July 2005 @ 16:50 |
Link to this message
|
Quote:
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS0C
You need an update on your firmware current is GS0P
http://www.liteonit.com/ODD/English/e_downloads/e_firmware_dvd%20...
Scroll down until you see your burner and you will see the current firmware.
Sony disks would definitely be an improvement over the Princo. Try the update and see if this makes any difference.
|
AfterDawn Addict
|
9. July 2005 @ 16:59 |
Link to this message
|
Out of curiousity what are you trying to backup. Are you trying to do an on the fly burn with Nero
Quote:
I even tried running it through dvdshrink, and shrink stops after it encodes 68%. It doesn't give an error msg, just stops.
This would not be a Nero burning problem but indicates something wrong with the source disk.
|
|
googin
Suspended due to non-functional email address
|
9. July 2005 @ 19:06 |
Link to this message
|
|
I forgot all about checking for firmware updates. Anyway, I updated the firmware and used a Sony disk. And it worked. Got it to copy. I don't know which cured it, but it made a copy.
What I was trying to copy was a very old John Wayne serial: "Shadow Of The Eagle", filmed in 1932 by the defunct Mascot Pictures. I got it from a friend of mine with whom who I trade old time radio shows, movie serials, and some B action/adventure movies. I am going to give my neighbor a copy, as he is a diehard Duke fan. He said he never knew the Duke starred in any serials.
|
AfterDawn Addict
|
9. July 2005 @ 19:30 |
Link to this message
|
Well if the burn worked I think that the media switch did it for you. How did you perform the burn? Did you open Nero and make the selection "Copy DVD"? That selection leads you to the settings that allow "on the fly" copying which is not a great idea. Next time select the icon right below that one. It is the "DVD-Video" icon. You will have better luck doing that.
|
|
googin
Suspended due to non-functional email address
|
10. July 2005 @ 06:36 |
Link to this message
|
|
Yep, I was using copydvd. I'll try the other method when I want to copy something else and see what happens. That was the first time I ever had a copydvd fail. I've made many, many copies of various things, and this was the first time I had the problem. Some with name media, such as Fuji, and others with the no name media.
|
Moderator
|
10. July 2005 @ 08:30 |
Link to this message
|
|
.....just don't use no-name or bad media in future for any data/films you want to keep.... :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
PAUL0617
Member
|
10. July 2005 @ 11:58 |
Link to this message
|
i use encoder which is in Nero when i burn dvd's
|
|
Advertisement
|
|
|
|
NoNe23
Newbie
|
10. July 2005 @ 14:23 |
Link to this message
|
Dont Use Nero To Encode Its Pure Bull Use WinAVI or TMPGE Xpress to Encode Then take it to Nero TO Burn And TMPGE Gives You Options To edit The Video Such as: Cropping, Colour Fixing, Sharpness, Reduce Ghosting, And A Auto Fix Which Brings The Movie Up to Regular Standards :D
--- Richard ---
|
|
