|
|
|
"invalid field in command": help!
|
|
|
drstein69
Newbie
|
12. July 2005 @ 11:05 |
Link to this message
|
|
Hello, I have this problem: without changing anything (software/media) my samsung ts-h552b stopped burning dvds (but not cds!). I tried to change media and writing speed just to be sure, but it didn't work. All I get is this message. Could it be a burner problem? I have the latest version of Nero and of the Firmware.
Can anybody help me please? This is the log I get:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18.35.34
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS10 - HA 3 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS04 - HA 3 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352A D: CDRom0
TSSTcorp CD/DVDW TS-H552B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522988kB)
Free physical memory: 332MB (340836kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.7.2005
ISO compilation
19.54.08 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19.54.08 #2 Text 0 File Reader.cpp, Line 127
Reader running
19.54.08 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552B running
19.54.08 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
19.54.08 #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
19.54.08 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1807567 (401:40.67, 3530MB)
19.54.08 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
19.54.08 #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
19.54.08 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19.54.08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1807568 (1807568) = #1807568/401:40.68
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1807568 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
19.54.08 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3701899264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1807568 | lead-out | 1 | 0x41 | 0x00
19.54.08 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19.54.15 #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
19.54.15 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19.54.15 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11.080 KB/s)
19.54.15 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19.54.15 #17 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode for Multisession
19.54.15 #18 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Super Link -> ON
19.54.15 #19 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: No
19.54.15 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19.54.26 #21 Text 0 File Cdrdrv.cpp, Line 1288
19:54:26.046 - TSSTcorp CD/DVDW TS-H552B\H3 T1 : Queue again later
20.01.25 #22 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 1807568 (1B94D0h), lenght 0 blocks
20.01.25 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20.01.26 #24 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 1807567
20.01.32 #25 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
20.02.04 #26 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (11.080 KB/s)
20.02.05 #27 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
20.02.05 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20.02.05 #29 CDR -1066 File ThreadedTransferInterface.cpp, Line 1733
Invalid field in command
20.02.05 #30 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1733
Invalid track info
20.02.05 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12.02.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 12. July 2005 @ 11:09
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
12. July 2005 @ 17:36 |
Link to this message
|
|
It could be your drive or media.. Try cleaning the lens with a comercial DVD lens cleaner or sometimes some compressed air will do the trick.
Try also to write an image of the disk to the Hard drive. that could rule out any of the software... :-)
My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm |
|
drstein69
Newbie
|
14. July 2005 @ 00:00 |
Link to this message
|
|
Thanx I'll try both!
|
|
drstein69
Newbie
|
15. July 2005 @ 04:33 |
Link to this message
|
|
Ok, cleaned the lens but nothing :(
Next step should be opening the whole box and have a look at the cables.. sigh
|
Moderator
|
15. July 2005 @ 04:46 |
Link to this message
|
|
hmmm i can't see anything amiss in that logfile...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
drstein69
Newbie
|
22. July 2005 @ 07:52 |
Link to this message
|
Got nothing until now, updated firmware & Nero, cleaned the lenses, controlled the cables and changed media.. damn samsung.. Should I buy a new dvd burner which do you advice me?
|
AfterDawn Addict
|
22. July 2005 @ 09:19 |
Link to this message
|
|
So you say it burns CD's with no problems then it just may be the drive is defective. How old is the drive?
My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm
|
|
drstein69
Newbie
|
22. July 2005 @ 09:41 |
Link to this message
|
|
The drive is 7-8 months old (and worked fine until last week). But.. is it possible for it to be defective just in dvd-burning and not cd-burning?
|
AfterDawn Addict
|
22. July 2005 @ 09:56 |
Link to this message
|
|
Yep two different lasers.. It should still be under warranty I would take it back and get a new one immediatly :-)
My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm
|
|
drstein69
Newbie
|
23. July 2005 @ 07:46 |
Link to this message
|
|
Thanx I didnt know that! Yes, I think the best thing is to take it back :)
|
|
JesusC
Suspended permanently
|
2. January 2006 @ 07:58 |
Link to this message
|
creaky (or anyone with new info) sorry to shake the dust off this thread. I found this thread by googling for the errors.
I am, currently, working on this error. I'll paste my log file below.
I was trying to use Nero to burn some video files created by a DVD authoring program I was trying out (using "Burn DVD-Video Files"). The program only creates the files and you have to use another program to burn the files to a disc.
I was wondering if any more info has come to light on this problem? To try to solve this problem I have updated the burners firmware and Nero (version 6) with no joy.
I grabbed a copy of TMPGEnc DVD Author (version 1.5.13.44) from a coworker. I just used TMPGEnc to burn to the media in the Nero log file:
Recorder: SONY DVD RW DRU-530A, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
The burn completed with out errors but I have yet to view the disk in my DVD player. In the past 7 months has it been found that Nero is the problem? I have used 3 out of the 2 50-spindle of disks I bought in Aug. The first two I used DVD Shrink(?) to burn the discs without problems.
Has anyone accross this error with the new Nero 7?
Are Maxell discs any good?
Thanks in advance, JC.
====================================================
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/20/2003 21:26:59
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 17:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DRU-530A> Version: 2.1g - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1g - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvodka Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-530A I: CDRom0
HL-DT-ST CD-RW GCE-8481B J: CDRom1
AXV CD/DVD-ROM K: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523240kB)
Free physical memory: 241MB (247612kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.1.2006
UDF/ISO compilation
21:04:52 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
21:04:52 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
21:04:52 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
21:04:52 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
21:04:52 #5 Text 0 File Reader.cpp, Line 127
Reader running
21:04:52 #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-530A running
21:04:52 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
21:04:52 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
21:04:52 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
21:04:52 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1969519 (437:40.19, 3846MB)
21:04:52 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
21:04:52 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-530A, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
21:04:52 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:04:52 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1969520 (1969520) = #1969520/437:40.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1969520 blocks [SONY DVD RW DRU-530A]
--------------------------------------------------------------
21:04:52 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-530A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4033576960, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1969520 | lead-out | 1 | 0x41 | 0x00
21:04:52 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
21:04:53 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
21:04:53 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
21:04:53 #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)
21:04:53 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:04:53 #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
21:04:53 #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
21:17:09 #23 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-530A > start writing Lead-Out at LBA 1969520 (1E0D70h), lenght 0 blocks
21:17:09 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:17:37 #25 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5,540 KB/s)
21:17:38 #26 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
21:17:38 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:17:38 #28 CDR -1066 File ThreadedTransferInterface.cpp, Line 1745
Invalid field in command
SONY DVD RW DRU-530A\H1 T0
21:17:38 #29 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1745
Invalid track info
21:17:38 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/20/2003 21:26:58
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/03/2003 23:00:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 03/11/2005 16:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 08/03/2004 23:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
2. January 2006 @ 08:12 |
Link to this message
|
@JesusC -
Quote:
creaky (or anyone with new info) sorry to shake the dust off this thread. I found this thread by googling for the errors.
- no worries, and google is indeed an amazing thing :)
Quote:
Recorder: <SONY DVD RW DRU-530A> Version: 2.1g
- firmware's up to date - http://sony.storagesupport.com/dvdrw/firmware.htm#530
Quote:
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvodka Port 2 ID 0 DMA: Off
- DMA needs to be ON for that CD drive, fix by following this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 510MB (523240kB)
Free physical memory: 241MB (247612kB)
Memory in use : 52 %
- sufficient total memory but you need to always ensure sufficient free memory by closing down more programs prior to dvd work/burning
Quote:
Invalid field in command
Invalid track info
- should be sorted by getting DMA back ON
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
JesusC
Suspended permanently
|
3. January 2006 @ 14:56 |
Link to this message
|
Creaky I tried your listed suggestions. I know I changed the DMA setings but I went back and double checked the settings and found that the one drive in the previous log where it said that the DMA was off was set to "DMA if available" however the "Current Transfer Mode" was PIO.
To fix this I "Uninstalled" the Secondary IDE Channel which the drives were attached. Reset the computer and then uninstalled the drives and reset again. Now everything is set to DMA.
However, still no joy (log below) when using Nero to burn the video files. If that ain't enough when the process barfs it takes a matter of minutes, literly, for Nero to register each click to exit. I then reset the computer to make sure everything is back to normal.
The disk that I, mention in my previous message, burned using TMPGEnc DVD (same media and files) worked in my DVD player. There were a few spots where the picture was pixelated but I found that this was done during the encoding process.
I'm open to suggestions but it seems that Nero (how, I don't know) does not like these disks. Is that possible? I've read posts on hardware and media not getting along but don't remember it being a problem with a software package. I haven't tried to burn data DVDs yet but I'm wondering if that is going to be any different.
Thanks, JC
===================================
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/20/2003 21:26:59
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 17:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DRU-530A> Version: 2.1g - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1g - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-530A I: CDRom0
HL-DT-ST CD-RW GCE-8481B J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523240kB)
Free physical memory: 142MB (145992kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.1.2006
UDF/ISO compilation
09:47:44 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
09:47:44 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
09:47:44 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
09:47:44 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
09:47:44 #5 Text 0 File Reader.cpp, Line 127
Reader running
09:47:44 #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-530A running
09:47:44 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
09:47:44 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
09:47:44 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
09:47:44 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1969519 (437:40.19, 3846MB)
09:47:44 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
09:47:44 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-530A, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
09:47:44 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:47:44 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1969520 (1969520) = #1969520/437:40.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1969520 blocks [SONY DVD RW DRU-530A]
--------------------------------------------------------------
09:47:44 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-530A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4033576960, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1969520 | lead-out | 1 | 0x41 | 0x00
09:47:44 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
09:47:44 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
09:47:44 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
09:47:44 #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)
09:47:44 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
09:47:44 #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
09:47:44 #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
10:00:00 #23 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-530A > start writing Lead-Out at LBA 1969520 (1E0D70h), lenght 0 blocks
10:00:00 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:00:28 #25 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5,540 KB/s)
10:00:29 #26 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
10:00:29 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:00:29 #28 CDR -1066 File ThreadedTransferInterface.cpp, Line 1745
Invalid field in command
SONY DVD RW DRU-530A\H1 T0
10:00:29 #29 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1745
Invalid track info
10:00:29 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/20/2003 21:26:58
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/03/2003 23:00:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 03/11/2005 16:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 08/03/2004 23:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
JesusC
Suspended permanently
|
5. January 2006 @ 06:43 |
Link to this message
|
|
Knock, Knock, Knock... is this thing on :-)))
Creaky, have I reached the bottom of your vast knowledge, or haven't you had time to answer? I understand either way just let me know and I'll try posting on the usenet groups or something. What ever the case may be I appreciate the help.
JC
|
Moderator
|
5. January 2006 @ 09:09 |
Link to this message
|
|
sorry, i've got a few replies i hadn't caught up on.
to me it's now down to one of two things, the burner isn't getting along with those discs, or the burner's not getting along well itself, ie it's failing..
i not so long back retired my trusty Sony DRU-700A after a couple thousand burns, took me a while to see that it was failing..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
kaidomav
Newbie
|
5. July 2006 @ 04:59 |
Link to this message
|
Hello!
I have the same problem... I tried with Sony and Samsung discs but the problem didnt disappear and more strange that I can burn images with Alcohol. Is this a Nero problem?
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/7/2002 22:03:20
ahead WinASPI: File 'C:\Arquivos de programas\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <SONY DVD RW DW-U55A> Version: 2.5b - HA 1 TA 3 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 5 - 7.0.1.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DW-U55A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-U55A D: CDRom3
SCSIVAX DVD/CD-ROM F: CDRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523056kB)
Free physical memory: 92MB (94292kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.7.2006
UDF compilation
08:25:23 #1 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Revision : 1.02
UDF Partition Type : physical
08:25:24 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
08:25:24 #3 Text 0 File Reader.cpp, Line 124
Reader running
08:25:24 #4 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DW-U55A running
08:25:25 #5 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
08:25:25 #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2092335 (464:57.60, 4086MB)
08:25:25 #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD DVD)
08:25:25 #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DW-U55A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR008
Disc Application Code: 64, Disc Physical Code: 193
08:25:25 #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
08:25:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2092336 (2092336) = #2092336/464:57.61
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2092336 blocks [D: SONY DVD RW DW-U55A]
--------------------------------------------------------------
08:25:25 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: SONY DVD RW DW-U55A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4285104128, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2092336 | lead-out | 1 | 0x41 | 0x00
08:25:25 #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
08:25:25 #13 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
08:25:25 #14 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
08:25:25 #15 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
08:25:25 #16 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 4x (5.540 KB/s)
08:25:26 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
08:25:26 #18 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession
08:25:26 #19 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON
08:25:26 #20 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
08:25:26 #21 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00 .0...@.....!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
09:00:53 #22 Text 0 File WriterStatus.cpp, Line 116
<D: SONY DVD RW DW-U55A> start writing Lead-Out at LBA 2092336 (1FED30h), length 0 blocks
09:00:53 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:00:54 #24 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2092335
09:00:56 #25 Phase 33 File dlgbrnst.cpp, Line 1725
Simulation completed successfully at 4x (5.540 KB/s)
09:00:57 #26 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5.540 KB/s)
09:00:58 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
09:00:58 #28 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession
09:00:58 #29 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON
09:00:58 #30 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 2092352
DVD high compatibility mode: Yes
09:00:58 #31 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00 .0...@.....!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
09:00:58 #32 SPTI -1066 File SCSIPassThrough.cpp, Line 323
D: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 1F ED 30 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
09:00:58 #33 CDR -1066 File ThreadedTransferInterface.cpp, Line 1799
Invalid field in command
D: SONY DVD RW DW-U55A
09:00:58 #34 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
09:00:58 #35 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/7/2002 21:05:10
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 08:53:04
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 23/8/2029 11:09:10 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/8/2004 02:55:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks!
|
Moderator
|
5. July 2006 @ 05:46 |
Link to this message
|
@kaidomav -
Quote:
Internal Version: 7, 0, 1, 4
- Nero is a little out of date, however your problem does not look like it's Nero-related
Quote:
Recorder: <SONY DVD RW DW-U55A> Version: 2.5b
- burner's firmware is up to date, but as at Nov 2004!, so is quite old now - http://forum.rpc1.org/dl_firmware.php?download_id=1876
This means the burner's firmware is ill-equipped to recognise newer media
Quote:
DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: Off
- DMA needs to be for that Toshiba drive, fix (turn DMA ON) by following this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 510MB (523056kB)
Free physical memory: 92MB (94292kB)
Memory in use : 81 %
- sufficient total memory however virtually no free memory so your PC will be using virtual memory ie a portion of hard disc; this in conjunction with DMA being OFF will be causing your problems
Quote:
Recorder: SONY DVD RW DW-U55A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR008
Disc Application Code: 64, Disc Physical Code: 193
- if the above fixes don't resolve your problem then try better media, these Optodisc are not too good
Quote:
Invalid field in command
- see all my comments
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 5. July 2006 @ 09:56
|
|
kaidomav
Newbie
|
5. July 2006 @ 07:13 |
Link to this message
|
|
Thanks for replying!
I turned On the Toshiba driver, but the problem still persists... how can I resolve the memory problem?
I tried to update the firmware using the firmware from sony website at this time (the first time, I use the firmware from the link that you show me).
|
Moderator
|
5. July 2006 @ 09:55 |
Link to this message
|
|
no worries. just noticed a speeling mistake in previous reply.
anyway, to free up more memory you just need to close down as many programs as you can prior to starting the burn process. Also don't multitask during the burn ie leave PC alone while burning (just better to be sure of a good burn without any disk activity at same time as burn is trying to burn data from that same hard disc)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 5. July 2006 @ 09:56
|
|
D_Monkata
Newbie
|
11. January 2007 @ 01:40 |
Link to this message
|
Hi i have this problem with Invalid Field in Command in Nero StartSmart and i so dispirit with this it happent at once...it's just work fine 2 day ago...and stop today.Please help me guys here is my Log from Nero.!Thanks
D-Monkata
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002-07-17 08:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: < DVD+RW RW8160> Version: 1.03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LP7116S RPZ542L >Version: 1.0 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <dtscsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8160 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LP7116S RPZ542L 1.0 dtscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : LP7116S RPZ542L 1.0 dtscsi Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
DVD+RW RW8160 E: CDRom0
LP7116S RPZ542L F: CDRom1
LP7116S RPZ542L G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 176MB (181216kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.1.2007
ISO compilation
13:01:49 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:01:49 #2 Text 0 File Reader.cpp, Line 127
Reader running
13:01:49 #3 Text 0 File Writer.cpp, Line 122
Writer DVD+RW RW8160 running
13:01:49 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
13:01:49 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
13:01:49 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2132847 (473:57.72, 4165MB)
13:01:49 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
13:01:49 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVD+RW RW8160, Media type: DVD+R
13:01:49 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:01:49 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2132848 (2132848) = #2132848/473:57.73
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2132848 blocks [DVD+RW RW8160]
--------------------------------------------------------------
13:01:49 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVD+RW RW8160] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4368072704, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2132848 | lead-out | 1 | 0x41 | 0x00
13:01:49 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
13:01:50 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
13:01:50 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
13:01:50 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3 324 KB/s)
13:01:50 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:01:50 #17 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BB00600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
13:01:50 #18 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
13:01:50 #19 Text 0 File DVDR.cpp, Line 5896
Drive: DVD+RW RW8160
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
13:01:50 #20 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: DVD-ROM
13:01:50 #21 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
13:02:28 #22 SCSI -400 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B570000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x91
Sense Qual: 0xC2
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x91 0xC2
13:02:28 #23 CDR -400 File Writer.cpp, Line 311
Unspecified target error
13:02:28 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:02:29 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
13:02:29 #26 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
13:02:29 #27 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
13:02:29 #28 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
13:02:29 #29 Text 0 File DVDR.cpp, Line 5896
Drive: DVD+RW RW8160
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
13:02:29 #30 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
13:02:29 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
13:02:29 #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3 324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-05-19 23:16:24
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002-07-17 07:53:02
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-25 05:47:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2714 (xpsp.050705-1524), size=95616 bytes, created 2005-07-05 18:45:22 (Adapter driver for rec)
File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 2006-05-10 15:26:25 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
D_Monkata
Newbie
|
13. January 2007 @ 08:37 |
Link to this message
|
|
Pleaseee see my log and if anyone can help i will apreciate thanks
|
|
