|
Hi, guys. I just got a new sony 800 recordable dvd player and can't copy any dvd files from my hard drive. after I installed a belkin 3 port firewire. Nero and clonedvd get to about 6% and 2% respectively and just stop. No errors at all. I've attached my log file below. Any help is appreciated. I've tried switching ports to no avail. Also using verbatim dvd+r.
********** Nero Recode 2 **********
Version: 2.2.6.11
Project type: Copy entire DVD
Target size: DVD5 (2282925)
02:11:07 File LangStreamPatcher.cpp, Line 56
Command table patching started...
02:11:07 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: SONY DVD RW DRU-800A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: E:\tempo\temp (3118858240 bytes free)
Direct burning: true
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
02:12:15 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Title Vobs [12092 vobus] 1865.50MB -> 1865.50MB [R 1.00]
Video: 1701.30MB, extra: 164.19MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 140.58MB [enabled]
Subpicture: 0 streams
02:12:15 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
02:12:16 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD+R
02:12:16 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2283095 sectors (2295104)
02:12:18 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2283095 sectors (955225 required)
02:12:18 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4459.17MB (1865.67MB obtained)
02:12:18 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
02:13:04 File vob_record.cpp, Line 643
DirectBurn offset: VTS_01_1.VOB 112
02:18:23 File burn_dvdfiles.cpp, Line 407
Compile DVD: Cancel
02:18:32 File NeroRecorder.cpp, Line 641
Burn failed (3)
----- Begin NeroAPI error log -----
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 7/18/2005 2:02:03 AM
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.8
Using interface version: 6.6.0.8
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Recorder: <SONY DVD RW DRU-800A> Version: KY01 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD307AA-00BAA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVD/CDRW RW9200 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom1
DVD/CDRW RW9200 F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 216MB (221856kB)
Memory in use : 57
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.7.2005
NeroAPI
2:12:17 AM #1 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
2:12:17 AM #2 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO
2:12:17 AM #3 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-800A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
2:12:17 AM #4 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:12:18 AM #5 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
2:12:18 AM #6 Text 0 File DVDPlusRW.cpp, Line 648
Start write address at LBA 0
DVD high compatibility mode: Yes
2:12:18 AM #7 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
Estimated filesystem size: 544
2:12:18 AM #8 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 6x (8,310 KB/s)
2:13:02 AM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 0. Length: 592
2:13:02 AM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1869
Reserved start fragment at 0
2:13:04 AM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 592. Length: 64
2:13:04 AM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_1.VOB at sector 656
2:18:32 AM #13 SCSI -500 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x15F10200
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x04 0x30 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
2:18:32 AM #14 SCSI -500 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x084C1400
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x04 0x30 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
2:18:32 AM #15 Text 0 File Mmc.cpp, Line 18867
Writer-Buffer for SONY DVD RW DRU-800A\H2 T0 reduced to 32768Bytes
2:18:32 AM #16 SCSI -500 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x084C1400
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x04 0x30 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
2:18:32 AM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 2174
Failed to write 96 sectors at 1040
2:18:32 AM #18 Phase 179 File APIProgress.cpp, Line 276
Writing file to disc failed
2:18:37 AM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 3629
Disc info:
Partitions: 0
2:18:37 AM #20 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
02:18:37 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
This message has been edited since posting. Last time this message was edited on 18. July 2005 @ 03:00
|
