|
|
|
burn process failed could not perform end of disc at once
|
|
|
inzion
Newbie
|
19. July 2005 @ 07:59 |
Link to this message
|
|
Hello. Been unsucessfully trying to burn a file that I converted from DIVX to (wishfully) DVD using a AD guide. To no avail. Been reading through different threads. Am a total newbie but applied all the information I could from what I read. I updated firmware. I updated Nero.
Only I don't have new media yet.
Could that be my one and only problem?
Log follows. All suggestions welcome.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 12/10/2001 5:32:34 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:21:30 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15h
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.19 - HA 3 TA 0 - 6.6.0.15
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.15
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2030AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA745 DVD/CDRW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
MATSHITA UJDA745 DVD/CDRW D: CDRom0
AXV CD/DVD-ROM E: CDRom1
_NEC DVD_RW ND-3500AG F: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785328kB)
Free physical memory: 467MB (478572kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.7.2005
UDF/ISO compilation
6:51:50 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
6:51:50 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
6:51:50 PM #3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:51:50 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
6:51:50 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
6:51:50 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:51:51 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:51:51 PM #8 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
6:51:51 PM #9 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2160719 (480:09.44, 4220MB)
6:51:51 PM #10 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
6:51:51 PM #11 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193
6:51:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:51:51 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2160720 (2160720) = #2160720/480:9.45
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2160720 blocks [_NEC DVD_RW ND-3500AG]
--------------------------------------------------------------
6:51:51 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4425154560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2160720 | lead-out | 1 | 0x41 | 0x00
6:51:51 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
6:51:51 PM #16 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
6:51:51 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
6:51:51 PM #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
6:51:51 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:51:51 PM #20 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode
6:51:51 PM #21 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Buffer underrun protection -> ON
6:51:51 PM #22 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: Yes
6:51:51 PM #23 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:51:51 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x20 0xF8 0x50 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
6:51:51 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1763
Illegal disc
6:51:51 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1763
Could not perform start of Disc-at-once
6:51:51 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 12/10/2001 5:29:42 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 7/13/2005 8:56:27 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 4:33:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Moderator
|
19. July 2005 @ 11:09 |
Link to this message
|
@inzion -
Quote:
WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 12/10/2001 5:32:34 PM
- update to latest version of ASPI - version 4.71 is here - http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm
Quote:
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.19
- (standard) firmware is up to date
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
- that's not right. Try here to fix that - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
- the previous suggestion should sort this out
Quote:
Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193
- these are indeed bad media from what i've read
Quote:
Illegal disc
- yup!
I recommend Verbatim datalifeplus wholeheartedly
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
inzion
Newbie
|
19. July 2005 @ 12:36 |
Link to this message
|
Creaky B
Thank you so much for your help. I updated my ASPI driver with your link.
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
---------------------------------------------------------------------
- that's not right. Try here to fix that - http://home.comcast.net/~bbmayo/FAQ.htm
I read through the above link and didn't find clearly the information I needed to make a correction. Maybe this is because I didn't understand well enough what I was reading.
Does the problem above, in plainer language, have to to with my usb 2.0 hubs, or connections?
And if so, it is not a software issue, but rather a question of cables?
And if the hardware problem, whereever it lies, be corrected, I would be able to resolve the DMA issue?
|
Moderator
|
19. July 2005 @ 12:42 |
Link to this message
|
here, try this method for fixing DMA then. take your time with it as mistakes in Regedit are baaaad :)
Quote:
Run REGEDIT. Go to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}
It has subkeys like 0000, 0001, 0002, etc. Normally 0001 is the primary IDE channel, 0002 the secondary, but other numbers can occur under certain circumstances. You have to go through these subkeys and check the DriverDesc value until you find the proper IDE channel.
Delete MasterIdDataChecksum or SlaveIdDataChecksum, depending on whether the device in question is attached as master or slave, but it can't actually hurt to delete both. Reboot. The drive DMA capabilities will be redetected.
Open Device Manager again and check whether the device is now actually using DMA mode. If so, congratulations, you've made it (at least until the next time Windows disables DMA).
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
newmary
Newbie
|
19. July 2005 @ 16:21 |
Link to this message
|
Hi Creaky
i have just joined and have had no problems with Nero until recently. I have done as was previously suggested uninstalled and reinstalled DMA(in primary and secondary controllers) and also went and reset compression in DVD Shrink to 4360. I then burnt 3 successfully. But this morning got the following error. The log follows, hope you can suggest something:
1A20-0231-0530-1777-0472-8594*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero API version: 6.3.1.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <PIONEER DVD-RW DVR-108> Version: 1.14 - HA 1 TA 0 - 6.3.1.18
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLlct15 20 atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-108 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-108 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114160kB)
Free physical memory: 36MB (37056kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.7.2005
NeroAPI
9:14:56 AM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
9:14:58 AM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
9:14:58 AM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
9:15:20 AM #4 Text 0 File Writer.cpp, Line 124
Writer PIONEER DVD-RW DVR-108 running
9:15:20 AM #5 Text 0 File Reader.cpp, Line 118
Reader running
9:15:20 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:15:20 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:15:22 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:15:22 AM #9 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media
9:15:23 AM #10 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2232863 (496:11.38, 4361MB)
9:15:23 AM #11 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO
9:15:23 AM #12 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: PIONEER DVD-RW DVR-108, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
9:15:23 AM #13 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:15:23 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2232864 (2232864) = #2232864/496:11.39
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2232864 blocks [PIONEER DVD-RW DVR-108 ]
--------------------------------------------------------------
9:15:23 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [PIONEER DVD-RW DVR-108 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4572905472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2232864 | lead-out | 1 | 0x00 | 0x41
9:15:24 AM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
9:15:24 AM #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
9:15:24 AM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
9:15:24 AM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 8x (11,080 KB/s)
9:15:24 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:15:25 AM #21 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
9:15:25 AM #22 Text 0 File Mmc.cpp, Line 20453
Set BUFE: supported -> ON
9:15:25 AM #23 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
9:15:25 AM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:15:30 AM #25 Text 0 File Cdrdrv.cpp, Line 1294
09:15:30.244 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:15:55 AM #26 Text 0 File Cdrdrv.cpp, Line 1294
09:15:55.481 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:15:56 AM #27 Text 0 File Cdrdrv.cpp, Line 1294
09:15:56.552 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:15:56 AM #28 Text 0 File Cdrdrv.cpp, Line 1294
09:15:56.682 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:15:57 AM #29 Text 0 File Cdrdrv.cpp, Line 1294
09:15:57.864 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:15:58 AM #30 Text 0 File Cdrdrv.cpp, Line 1294
09:15:58.885 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:15:59 AM #31 Text 0 File Cdrdrv.cpp, Line 1294
09:15:59.757 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:00 AM #32 Text 0 File Cdrdrv.cpp, Line 1294
09:16:00.548 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:01 AM #33 Text 0 File Cdrdrv.cpp, Line 1294
09:16:01.279 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:01 AM #34 Text 0 File Cdrdrv.cpp, Line 1294
09:16:01.529 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:01 AM #35 Text 0 File Cdrdrv.cpp, Line 1294
09:16:01.699 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:02 AM #36 Text 0 File Cdrdrv.cpp, Line 1294
09:16:02.320 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:03 AM #37 Text 0 File Cdrdrv.cpp, Line 1294
09:16:03.101 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:03 AM #38 Text 0 File Cdrdrv.cpp, Line 1294
09:16:03.933 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:04 AM #39 Text 0 File Cdrdrv.cpp, Line 1294
09:16:04.754 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:05 AM #40 Text 0 File Cdrdrv.cpp, Line 1294
09:16:05.575 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:10 AM #41 Text 0 File Cdrdrv.cpp, Line 1294
09:16:10.292 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:11 AM #42 Text 0 File Cdrdrv.cpp, Line 1294
09:16:11.063 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:13 AM #43 Text 0 File Cdrdrv.cpp, Line 1294
09:16:13.617 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:14 AM #44 Text 0 File Cdrdrv.cpp, Line 1294
09:16:14.408 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:15 AM #45 Text 0 File Cdrdrv.cpp, Line 1294
09:16:15.279 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:16 AM #46 Text 0 File Cdrdrv.cpp, Line 1294
09:16:16.110 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:16 AM #47 Text 0 File Cdrdrv.cpp, Line 1294
09:16:16.871 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:17 AM #48 Text 0 File Cdrdrv.cpp, Line 1294
09:16:17.682 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:18 AM #49 Text 0 File Cdrdrv.cpp, Line 1294
09:16:18.464 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:19 AM #50 Text 0 File Cdrdrv.cpp, Line 1294
09:16:19.325 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:20 AM #51 Text 0 File Cdrdrv.cpp, Line 1294
09:16:20.206 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:20 AM #52 Text 0 File Cdrdrv.cpp, Line 1294
09:16:20.997 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:21 AM #53 Text 0 File Cdrdrv.cpp, Line 1294
09:16:21.788 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:22 AM #54 Text 0 File Cdrdrv.cpp, Line 1294
09:16:22.730 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:23 AM #55 Text 0 File Cdrdrv.cpp, Line 1294
09:16:23.601 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:24 AM #56 Text 0 File Cdrdrv.cpp, Line 1294
09:16:24.412 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:25 AM #57 Text 0 File Cdrdrv.cpp, Line 1294
09:16:25.153 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:25 AM #58 Text 0 File Cdrdrv.cpp, Line 1294
09:16:25.984 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:30 AM #59 Text 0 File Cdrdrv.cpp, Line 1294
09:16:30.932 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:33 AM #60 Text 0 File Cdrdrv.cpp, Line 1294
09:16:33.395 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:34 AM #61 Text 0 File Cdrdrv.cpp, Line 1294
09:16:34.226 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:35 AM #62 Text 0 File Cdrdrv.cpp, Line 1294
09:16:35.037 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:35 AM #63 Text 0 File Cdrdrv.cpp, Line 1294
09:16:35.889 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:36 AM #64 Text 0 File Cdrdrv.cpp, Line 1294
09:16:36.750 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:37 AM #65 Text 0 File Cdrdrv.cpp, Line 1294
09:16:37.591 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:38 AM #66 Text 0 File Cdrdrv.cpp, Line 1294
09:16:38.392 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:39 AM #67 Text 0 File Cdrdrv.cpp, Line 1294
09:16:39.404 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:40 AM #68 Text 0 File Cdrdrv.cpp, Line 1294
09:16:40.185 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:40 AM #69 Text 0 File Cdrdrv.cpp, Line 1294
09:16:40.986 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:41 AM #70 Text 0 File Cdrdrv.cpp, Line 1294
09:16:41.907 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:42 AM #71 Text 0 File Cdrdrv.cpp, Line 1294
09:16:42.829 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:43 AM #72 Text 0 File Cdrdrv.cpp, Line 1294
09:16:43.640 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:44 AM #73 Text 0 File Cdrdrv.cpp, Line 1294
09:16:44.571 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:45 AM #74 Text 0 File Cdrdrv.cpp, Line 1294
09:16:45.392 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:50 AM #75 Text 0 File Cdrdrv.cpp, Line 1294
09:16:50.820 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:51 AM #76 Text 0 File Cdrdrv.cpp, Line 1294
09:16:51.060 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:53 AM #77 Text 0 File Cdrdrv.cpp, Line 1294
09:16:53.454 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:54 AM #78 Text 0 File Cdrdrv.cpp, Line 1294
09:16:54.225 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:55 AM #79 Text 0 File Cdrdrv.cpp, Line 1294
09:16:55.026 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:55 AM #80 Text 0 File Cdrdrv.cpp, Line 1294
09:16:55.917 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:56 AM #81 Text 0 File Cdrdrv.cpp, Line 1294
09:16:56.618 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:57 AM #82 Text 0 File Cdrdrv.cpp, Line 1294
09:16:57.400 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:58 AM #83 Text 0 File Cdrdrv.cpp, Line 1294
09:16:58.221 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:16:59 AM #84 Text 0 File Cdrdrv.cpp, Line 1294
09:16:58.992 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:00 AM #85 Text 0 File Cdrdrv.cpp, Line 1294
09:17:00.174 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:01 AM #86 Text 0 File Cdrdrv.cpp, Line 1294
09:17:01.045 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:01 AM #87 Text 0 File Cdrdrv.cpp, Line 1294
09:17:01.856 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:02 AM #88 Text 0 File Cdrdrv.cpp, Line 1294
09:17:02.727 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:03 AM #89 Text 0 File Cdrdrv.cpp, Line 1294
09:17:03.889 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:04 AM #90 Text 0 File Cdrdrv.cpp, Line 1294
09:17:04.660 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:05 AM #91 Text 0 File Cdrdrv.cpp, Line 1294
09:17:05.511 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:06 AM #92 Text 0 File Cdrdrv.cpp, Line 1294
09:17:06.302 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:07 AM #93 Text 0 File Cdrdrv.cpp, Line 1294
09:17:07.134 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:07 AM #94 Text 0 File Cdrdrv.cpp, Line 1294
09:17:07.895 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:08 AM #95 Text 0 File Cdrdrv.cpp, Line 1294
09:17:08.075 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:08 AM #96 Text 0 File Cdrdrv.cpp, Line 1294
09:17:08.135 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:12 AM #97 Text 0 File Cdrdrv.cpp, Line 1294
09:17:12.852 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:13 AM #98 Text 0 File Cdrdrv.cpp, Line 1294
09:17:13.032 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:15 AM #99 Text 0 File Cdrdrv.cpp, Line 1294
09:17:15.145 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:16 AM #100 Text 0 File Cdrdrv.cpp, Line 1294
09:17:16.026 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:16 AM #101 Text 0 File Cdrdrv.cpp, Line 1294
09:17:16.908 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:17 AM #102 Text 0 File Cdrdrv.cpp, Line 1294
09:17:17.559 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:18 AM #103 Text 0 File Cdrdrv.cpp, Line 1294
09:17:18.490 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:19 AM #104 Text 0 File Cdrdrv.cpp, Line 1294
09:17:19.311 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:25 AM #105 Text 0 File Cdrdrv.cpp, Line 1294
09:17:25.139 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:27 AM #106 Text 0 File Cdrdrv.cpp, Line 1294
09:17:27.583 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:28 AM #107 Text 0 File Cdrdrv.cpp, Line 1294
09:17:28.414 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:29 AM #108 Text 0 File Cdrdrv.cpp, Line 1294
09:17:29.225 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:30 AM #109 Text 0 File Cdrdrv.cpp, Line 1294
09:17:30.026 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:30 AM #110 Text 0 File Cdrdrv.cpp, Line 1294
09:17:30.778 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:31 AM #111 Text 0 File Cdrdrv.cpp, Line 1294
09:17:31.619 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:32 AM #112 Text 0 File Cdrdrv.cpp, Line 1294
09:17:32.510 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:33 AM #113 Text 0 File Cdrdrv.cpp, Line 1294
09:17:33.341 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:34 AM #114 Text 0 File Cdrdrv.cpp, Line 1294
09:17:34.172 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:34 AM #115 Text 0 File Cdrdrv.cpp, Line 1294
09:17:34.994 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:35 AM #116 Text 0 File Cdrdrv.cpp, Line 1294
09:17:35.775 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:36 AM #117 Text 0 File Cdrdrv.cpp, Line 1294
09:17:36.346 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:17:36 AM #118 Text 0 File Cdrdrv.cpp, Line 1294
09:17:36.756 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
9:20:36 AM #119 CDR -25 File Writer.cpp, Line 304
Queue again later
PIONEER DVD-RW DVR-108\H1 T0
9:20:40 AM #120 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:20:41 AM #121 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
9:20:41 AM #122 Text 0 File DVDR.cpp, Line 2304
EndDAO: Last written address was 197407
9:23:08 AM #123 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 8x (11,080 KB/s)
9:23:09 AM #124 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
9:23:09 AM #125 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
newmary
|
|
Advertisement
|
|
|
Moderator
|
19. July 2005 @ 23:16 |
Link to this message
|
@newmary -
Quote:
1A20-**************
- EDIT OUT your serial number - it will be stolen/or has been by now
Quote:
Nero API version: 6.3.1.18
- that's old - latest is 6.6.0.15. Uninstall Nero, uninstall completely using Nero's Clean Tools- " http://www.nero.com/en/Clean_Tools.html ", install 6.6.0.15 but do NOT install Nero's InCD program, it interferes with standard Nero.
Quote:
Recorder: <PIONEER DVD-RW DVR-108> Version: 1.14
- your burner's firmware is out of date - version 1.20 dated 28/04/05 is here (Firmware teaches your burner about media/newer media/burn speeds.) - http://www.pioneer.co.uk/uk/download.jsp?dir=/files/support/dvrup...
Quote:
DiskPeripheral : QUANTUM FIREBALLlct15 20 atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-108 atapi Port 1 ID 0 DMA: On
- DMA is OFF on the hard drive, that NEEDS fixing. Follow this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 111MB (114160kB)
Free physical memory: 36MB (37056kB)
Memory in use : 67 %
- 'fraid you must be joking! - you NEED more memory, you can barely run windows with 128MB, never mind dvd burning as well
Quote:
PIONEER DVD-RW DVR-108\H1 T0 : Queue again later
- lots of these errors, will be due to the other problems i've mentioned
Quote:
Burn process failed at 8x (11,080 KB/s)
- no chance!, your lack of memory coupled with the problems i've mentioned will not allow 8x burning. i always do 4x and recommend 4x but you'll be lucky to make 4x burning. Get more memory. By the way a 100% successful burn from Nero (maybe other programs too but i only use Nero) does NOT i'm afraid mean a successful, playable movie.
Quote:
Existing drivers:
- this isn't right, there's nothing listed here. hmmm, hopefully following the DMA fix suggested above will fix that..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 19. July 2005 @ 23:16
|
|
