|
|
|
hello
|
|
|
skippy_1
Newbie
|
22. July 2005 @ 15:49 |
Link to this message
|
|
im sure you get this alot and I know it sucks having to explain things over and over but pelase help me on this I just got some anime from a torrent and I would like to burn it into a disk I have a DVD R and I got nerovission express SE evrytime I try to do it it just messes up somewhere for me mind explaining what I should do or if I need anything else please and thank you
|
|
Advertisement
|
|
|
|
|
Dissone
Junior Member
|
22. July 2005 @ 16:19 |
Link to this message
|
Hey there skippy_1,
A log file would be nice, perhaps a screen shot even. Details on the source file ie extension, the blank media, perhaps your burner and firmware version for it (the burner). You can use dvdinfopro to find out about the media, the burner and some other stuff. Go here to get it.
http://www.dvd-recordable.org/modules.php?op=modload&name=Reviews...
Also have you successfully burned anything with your current setup? If so we'll need to figure out if anything has changed such as the media, or a new softwrae having been installed for example Nero doesn't always work well with Roxio installed.
Dissones4u ;) |
|
skippy_1
Newbie
|
22. July 2005 @ 17:06 |
Link to this message
|
|
|
|
skippy_1
Newbie
|
22. July 2005 @ 17:06 |
Link to this message
|
|
|
|
Dissone
Junior Member
|
22. July 2005 @ 18:53 |
Link to this message
|
The log file is the window that shows step by step what Nero is doing as the burn begins, it will show where the error occurs and possibly why. The screen shot would be of the Nero interface again showing exactly what therror is, this is not a must have. Once you use DVDInfoPro you should onclude the info for each item media, burner, seperately so that anybody trying to help can read this post and know as much info as possible, anything less and they will simply be speculating on your troubles. Lastly there were a few questions for consideration in my first response that will help determine where you stand. For example whether or not you have burned anything with your current setup. What type of file is the source it may be encoded as SVCD, XviD, DivX, among other things. It must be the compatable format for the type of burn you are trying to produce. Example you can't download a movie in SVCD format and then burn it to dvd without bloating the file size back to it's original value. If you download say a multi disk SVCD that totals around 2100 MB (3 disks) you may not fit that 2100 MB on a DVD as the file will bloat by at leats 2.5x or so. With virtually no info to go on I think that you may have to convert the downloaded file from say XviD or DivX to DVD. Read this guide and see if it applies to you.
http://www.afterdawn.com/guides/archive/multiple_formats_to_dvd_w...
It appears that your firmware is v0054 check this link to see if you can find your burner and most current version. You may have to look under the manufacturer's website if you don't find it here.
http://www.americal.com/pg/dvd-burner-writer-firmware-version-upd...
Finally read through the guides section there are several for using Nero but again it depends on your source file you can burn Bin/Cue, VCD, SVCD etc.
Sorry that this isn't much help yet but once there are more details I'm sure that someone in here can help; they always do.
Below is a copy of a log generated for my blank media usin DVDInfoPro
Media Information
Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID SONY D11
Media Product Revision Number 00h
Format Capacity Blank Disc
Free Blocks 405405696
Free Capacity 4.38GB(4.70G)
Book Type DVD+R
Media Type DVD+R
Manufacturer Rated Speed 8.0x 11080KBps
Available Write Descriptor CLV 8.0x 11080KBps
Available Write Descriptor CLV 6.0x 8310KBps
Data area starting sector 30000h
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1
Complete Media Code
00000000 08 02 00 00 A1 0F 02 00 00 03 00 00 00 26 05 3F .............&.?
00000010 00 00 00 00 00 00 03 53 4F 4E 59 00 00 00 00 44 .......SONY....D
00000020 31 31 00 38 23 54 37 14 00 32 6F 00 96 6A 17 19 11.8#T7..2o..j..
00000030 0C 0C 0A 0B 01 19 1B 0B 0B 0E 0F 01 00 00 00 00 ................
And here is what the error log should look like:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15h
(Nero Express)
Recorder: <PHILIPS PBDV1640P> Version: B3.4 - HA 3 TA 0 - 6.6.0.15
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITEON DVD-ROM LTD163D >Version: GHR3 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV0602H atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163D atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITEON DVD-ROM LTD163D D: CDRom0
HL-DT-ST CD-RW GCE-8400B E: CDRom1
Generic DVD-ROM G: CDRom2
PHILIPS PBDV1640P I: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 254MB (260112kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.7.2005
ISO compilation
10:18:27 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:18:27 #2 Text 0 File Reader.cpp, Line 127
Reader running
10:18:27 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS PBDV1640P running
10:18:27 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:18:27 #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
10:18:27 #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1693503 (376:20.03, 3307MB)
10:18:27 #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
10:18:27 #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: PHILIPS PBDV1640P, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193
10:18:27 #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:18:27 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1693504 (1693504) = #1693504/376:20.4
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1693504 blocks [PHILIPS PBDV1640P]
--------------------------------------------------------------
10:18:27 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS PBDV1640P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3468296192, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1693504 | lead-out | 1 | 0x41 | 0x00
10:18:27 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:18:27 #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
10:18:27 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:18:27 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
10:18:27 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:18:27 #17 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode for Multisession
10:18:28 #18 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Buffer underrun protection -> ON
10:18:28 #19 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: No
10:18:28 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FF1BF7 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:19:03 #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C060000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
10:19:03 #22 CDR -1135 File Writer.cpp, Line 311
Write error
10:19:03 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:19:03 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:19:03 #25 Text 0 File DVDR.cpp, Line 2749
EndDAO: Last written address was -1
10:19:03 #26 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
10:19:07 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for src)
Please re-read the last two responses and include as much information as possible so that we can better assist you.
Dissones4u ;)
|
|
skippy_1
Newbie
|
22. July 2005 @ 21:58 |
Link to this message
|
|
ok most of that stuff I didnt understand ^^;; but heres that log thing I was using nero startsmart and I got this error
Customer
Fry's Electronics
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 6:25:03 AM
Nero version: 6.0.0.6 (Nero Express)
Recorder: <DVDRW IDE1008> Version: 0054 - HA 1 TA 0 - 6.0.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE1008 >Version: 0054 - HA 1 TA 0 - 6.0.0.6
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CD-ROM CDU5211 atapi Port 1 ID 1 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 503MB (515564kB)
Free physical memory: 43MB (44356kB)
Memory in use : 91 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.7.2005
Video CD
10:53:42 PM #1 Phase 82 File dlgbrnst.cpp, Line 1852
Encoding video
10:53:42 PM #2 Text 0 File VCDCompilationImpl.cpp, Line 476
Using Nero Video Converter version 0.00
10:53:42 PM #3 AVIVCDFILEITEM -103 File VCDFileItem.cpp, Line 670
Cannot create a temporary file name
10:53:42 PM #4 Text 0 File AVIVCDFileItem.cpp, Line 902
Temporary file C:\Documents and Settings\Owner\Local Settings\Temp deleted
10:53:42 PM #5 Text 0 File VCDDoc.cpp, Line 2527
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: NTSC
-----------------------------------------------------
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/23/2005 12:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 3:28:09 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 22. July 2005 @ 22:52
|
|
Dissone
Junior Member
|
22. July 2005 @ 23:08 |
Link to this message
|
skippy_1,
I will try to do this step by step so that you can follow but there is still some info that we may need to get.
#1......In the first paragraph there is a line that says recorder:
Quote:
Recorder: <DVDRW IDE1008> Version: 0054 - HA 1 TA 0 - 6.0.0.6 [/qoute]
This shows your recorder and firmware version I must admit that I still can't tell the name brand by this so please let me know.
Once we have the name brand we can look up you firmware to see if yours is out of date. Here is a second site that provides firmware:
http://forum.rpc1.org/dl_firmware.php?download_id=1941 and http://cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=1008
#2......The very next paragraph details the ScSi map:
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CD-ROM CDU5211 atapi Port 1 ID 1 DMA: Off
=======================
This shows that your DMA is turned off go here to see how to turn it on: http://home.comcast.net/~bbmayo/FAQ.htm
#3.......Skip the next paragraph and goto where it shows the actual burn process:
Quote:
22.7.2005
Video CD
10:53:42 PM #1 Phase 82 File dlgbrnst.cpp, Line 1852
Encoding video
10:53:42 PM #2 Text 0 File VCDCompilationImpl.cpp, Line 476
Using Nero Video Converter version 0.00
10:53:42 PM #3 AVIVCDFILEITEM -103 File VCDFileItem.cpp,
***************************Line 670******************************
**************Cannot create a temporary file name*****************
10:53:42 PM #4 Text 0 File AVIVCDFileItem.cpp, Line 902
Temporary file C:\Documents and Settings\Owner\Local Settings\Temp deleted
10:53:42 PM #5 Text 0 File VCDDoc.cpp, Line 2527
This appears to show that the whole process from beginning to end failed within 1 second according to the time stamp I have made bold the first and last times stamped.
It also shows that you are trying to burn to VCD format as shown in italics.
Then there is the situation that Nero is complaining about wich I have high lighted with asteriks. In short Nero is unable to create a name for the temporary file. This may be due to a bad name given by you which is not compatable with the file format. I'm no pro here but I think if you were to play around with it you can resolve your issue. Again I'm curious as to whether or not you have successfully burned anything with your current setup?
Hope this helps, By the way I don't have any IM installed so if you need you can simply PM me here.
Dissones4u ;)
|
|
skippy_1
Newbie
|
23. July 2005 @ 13:41 |
Link to this message
|
|
ok I have burned CDs before using windows media player and they come out fine. as for the burner where can I get the name I dont know where I can get mine since it was custom made by frys.
|
|
Dissone
Junior Member
|
24. July 2005 @ 06:23 |
Link to this message
|
I've gone and sought some additional help from an "afterdawn addict" and this is his take on your situation:
creaky writes
_ 24. July 2005 @ 05:22
Quote:
hiya, here's what i would say to the logfile -
Nero version: 6.0.0.6 (Nero Express) - old
Recorder: <DVDRW IDE1008> Version: 0054 - firmware may be out of date but this is apparently not the best drive. it's a BTC drive by the way
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CD-ROM CDU5211 atapi Port 1 ID 1 DMA: Off - DMA needs sorting
Physical memory : 503MB (515564kB)
Free physical memory: 43MB (44356kB)
Memory in use : 91 % - atrocious free memory
Cannot create a temporary file name -i'd suspect no free memory and/or no free disc space - just a guess
Creaky B
ECS EZ Buddie case (v small & sexy), Athlon XP 2800+, 1GB PC2700
Ambient - 27C, CPU Idle - 59C, CPU working - 68C : not too bad for case with limited airflow.
WinXP SP2, Sony DRU-700A & LG-4480B, 120GB Seagate ATA100 8MB Buffer.
Verbatim DataLifePlus & a few Taiyo Yuden (TYG02) are the ONLY media allowed near my Burners.
Creative Inspire 5.1 GD580 for DVD,PS2 & PC
..Newbies pls see this - cheapy media is BAD..... - http://forums.afterdawn.com/thread_view.cfm/193298
..Memorex/CMC - don't let them near your Burner..... - http://forums.afterdawn.com/thread_view.cfm/195438
So again this is from someone who has been doing this for awhile and I'd bet that among some of the things that I'd already mentioned that your physical memory needs to be corrected; 503 MB should be sufficient but for some reason there isn't much free so as Creaky said
either your hard ddrive is packed or you have some pretty disk intensive programs running while your burning wich you shouldn't really be doing. See if any of this helps if not we'll try and work on it some more.
Later
Dissones4u ;)
|
Moderator
|
24. July 2005 @ 09:39 |
Link to this message
|
|
....what Dissone said :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
AfterDawn Addict
|
24. July 2005 @ 09:46 |
Link to this message
|
|
Moderator
|
24. July 2005 @ 09:48 |
Link to this message
|
|
and there goes someone who's not 110% happy with that particular drive, eh arniebear (winks!)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
24. July 2005 @ 09:51 |
Link to this message
|
|
Yes, the drive that haunts me, it was one of my worst purchases next to Memorex disks, come to think about it the Memorex were better. Am thinking of a new BenQ to replace that worthless piece of junk.
|
|
skippy_1
Newbie
|
24. July 2005 @ 12:43 |
Link to this message
|
|
Im using memorex disks >.> <.<
|
Moderator
|
24. July 2005 @ 12:54 |
Link to this message
|
|
along with the previous logfile suggestions, pls proceed to 2nd link in my sig for a fair few people's experiences/thoughts/pain re Memorex discs and other such foul media :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
skippy_1
Newbie
|
24. July 2005 @ 13:01 |
Link to this message
|
pk well I got the newest Nero well I think it is 6.6 and I updated my firmware and did the DMA thing that disone said.anything else?
|
Moderator
|
24. July 2005 @ 13:03 |
Link to this message
|
|
change the media ?
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
skippy_1
Newbie
|
24. July 2005 @ 13:04 |
Link to this message
|
|
too what?
|
Moderator
|
24. July 2005 @ 13:06 |
Link to this message
|
|
i'd recommend Verbatim datalifeplus
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
24. July 2005 @ 13:06 |
Link to this message
|
Watch your burn speed and set target to 4300 to 4334
Quote:
Burn process started at 8x
Keep it to 4x.
|
|
skippy_1
Newbie
|
24. July 2005 @ 13:11 |
Link to this message
|
|
media as in disks to burn with?and how do I keep it at 4X
|
AfterDawn Addict
|
24. July 2005 @ 13:19 |
Link to this message
|
Yes your disks to burn on, creaky already recommended Verbatim, and so do I. Set your drive burn speed to 4x in Nero before you burn.
|
|
skippy_1
Newbie
|
24. July 2005 @ 13:20 |
Link to this message
|
|
well I am broke at the moment spent 20 bucks for these and thats all I had ^^;; but with these it should be able to burn fine right?
|
Moderator
|
24. July 2005 @ 13:20 |
Link to this message
|
|
..and make sure the blank disc is in drive before you click on burn, thus the drive will allow correct choices of burn speed
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Advertisement
|
|
|
|
skippy_1
Newbie
|
24. July 2005 @ 13:22 |
Link to this message
|
|
I also think I made the mistake of getting 16X disks does that matter?
|
|
