|
Hello tech-types. I'm trying to back up DVD's with Nero and I'm getting failure upon failure. After looking on other posts on this forum I have downloaded the Dynamic control reg patch thingy from Nero and checked the firmware on my DVD writer. Some progress: It got to 6% instead of only 1% but this is still not too great.
Here's the log of the burn:
Joe
GroovyReg
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
Recorder: <DVDRW IDE1008> Version: 0060 - HA 1 TA 0 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE1008 >Version: 0060 - HA 1 TA 0 - 6.6.0.14
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8320B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW IDE1008 D: CDRom0
HL-DT-ST CD-RW GCE-8320B E: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 693MB (710592kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.7.2005
Burn DVD Image
13:26:07 #1 Text 0 File Reader.cpp, Line 127
Reader running
13:26:07 #2 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE1008 running
13:26:07 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4538640384
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=492:28.33 ( 2216133) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Joe's Stuff\DVD\Watership Down.nrg>
13:26:07 #4 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media
13:26:07 #5 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2216132 (492:28.32, 4328MB)
13:26:07 #6 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
13:26:07 #7 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: DVDRW IDE1008, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
13:26:07 #8 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:26:07 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2216133 (2216133) = #2216133/492:28.33
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2216133 blocks [DVDRW IDE1008]
--------------------------------------------------------------
13:26:07 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVDRW IDE1008] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4538640384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2216133 | lead-out | 1 | 0x41 | 0x00
13:26:07 #11 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
13:26:08 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
13:26:08 #13 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: PRODISC.
Media type ID: R03
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
23 54 37 0F 02 54 6B 02 - 94 63 15 15 0B 0A 08 08 #T7..Tk..c......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
13:26:08 #14 Text 0 File DVDR.cpp, Line 5583
Drive: DVDRW IDE1008
Book Type request [BTC]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
13:26:08 #15 CDR -1211 File DVDR.cpp, Line 4929
Book Type set to: DVD-ROM
13:26:08 #16 Text 0 File DVDPlusRW.cpp, Line 655
Start write address at LBA 0
DVD high compatibility mode: Yes
14:01:57 #17 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04020000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0x9E 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
14:01:57 #18 CDR -1135 File Writer.cpp, Line 311
Write error
14:01:57 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
14:01:57 #20 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
14:01:59 #21 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
14:03:43 #22 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
14:03:43 #23 Text 0 File DVDR.cpp, Line 5583
Drive: DVDRW IDE1008
Book Type request [BTC]: DVD+R
Changing the Book Type was finished successfully, return code 0
14:03:43 #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I'm a complete beginner at this stuff so please go slowly with any explaination you may be kind enough to post.
Thanks a lot.
This message has been edited since posting. Last time this message was edited on 30. July 2005 @ 05:28
|
