|
I have been using the Nero 6.0 for a long while with my burner and encountered no problems... until now. I can't recall what i did, but now whenever i tried to burn a CD-R, it will start burning and at some random percentage, i get this blue screen saying some invalid page thingy violation... and then starts dumping psyhical memory. Either that or the computer just restarts itself automatically. the best this is, no log is created because the system just "crashed" all of a sudden. i tried using the updated 6.6ver and still the problem persist. even when i shut down whatever background progams running, anti-virus, firewall etc... still doesnt. work. there was one point where i was only given the option to burn at a speed of 8x... i tried it and it was about to end of successful, at about 97%... that blue screen comes out again. I'm using a AMD 750 Duron with 512MB memory, running 2 hard disk and the 52x cd burner as my only cd player unit. and i'm running XP Pro, w/o the SP packages as my computer seems to always 'crash' while trying to install those. the only way that i could produce a log was to burn a cd and abort it soon after. here's the log, hope anyone of you guys can help me solve this problem before crazy and dreading to buy another burner unit when i'm out of $.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <AOPEN CRW5232/AAO PRO> Version: 1.02 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AOPEN CRW5232/AAO PRO >Version: 1.02 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 6L020J1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : AOPEN CRW5232/AAO PRO atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
AOPEN CRW5232/AAO PRO H: CDRom0
Generic DVD-ROM J: CDRom1
AXV CD/DVD-ROM I: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 41943040 (41943040) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 283MB (289864kB)
Memory in use : 44
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2005
CD-ROM (ISO)
7:15:08 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:15:08 PM #2 Text 0 File Burncd.cpp, Line 2882
AOPEN CRW5232/AAO PRO
Buffer underrun protection activated
7:15:08 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
7:15:08 PM #4 Text 0 File Writer.cpp, Line 122
Writer AOPEN CRW5232/AAO PRO running
7:15:08 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
7:15:08 PM #6 Text 0 File Burncd.cpp, Line 3167
Turn on Track-At-Once, using CD-R/RW media
7:15:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 16699 ( 3:44.49)
7:15:08 PM #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO
7:15:08 PM #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: AOPEN CRW5232/AAO PRO;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
7:15:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:15:08 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 16700 (16700) = #16700/3:42.50
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16698 blocks [AOPEN CRW5232/AAO PRO]
--------------------------------------------------------------
7:15:08 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [AOPEN CRW5232/AAO PRO] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 34508800, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
16700 | lead-out | 1 | 0x41 | 0x00
7:15:08 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 16700 -> 16698.
7:15:08 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:15:08 PM #15 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
7:15:08 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:15:08 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (1,800 KB/s)
7:15:09 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:15:09 PM #19 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
7:15:21 PM #20 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user
7:15:23 PM #21 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
AOPEN CRW5232/AAO PRO\H1 T0
7:15:23 PM #22 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
7:15:23 PM #23 Text 0 File Mmc.cpp, Line 16119
<AOPEN CRW5232/AAO PRO > start Close Session
7:15:46 PM #24 Phase 39 File dlgbrnst.cpp, Line 1832
Burn process aborted
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 6:28:13 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86656 bytes, created 8/23/2001 8:00:00 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
