Buffer too Large!!! + Buffer under runs!!!

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Wednesday 27.11.2024 / 10:04

Search AfterDawn Forums:

afterdawn.com > forums > software specific discussion > nero discussion > buffer too large!!! + buffer under runs!!!

Browse by topic

Forums

Start a new thread

Buffer too Large!!! + Buffer under runs!!!

Jump to:

Posted

Message

hotrodbx

Newbie

14. August 2005 @ 14:07

Link to this message

Hi i'm trying to burnavi files onto a DVD. Error messages says buffer too large. Also i always seem to get buffer under runs no matter what i burn. Can anyone help??? I'm new to burning things. Thanx

Error log included:

Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'F:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15h
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.6.0.15
Adapter driver: <IntelATA> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LG CD-ROM CRD-8482B>Version: 1.05 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <IntelATA> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 YAR4 IntelATA Port 0 ID 0 DMA: Off
DiskPeripheral : QUANTUM FIREBALLlct2 APL. IntelATA Port 0 ID 1 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1633SBS0S IntelATA Port 1 ID 0 DMA: Off
CdRomPeripheral : LG CD-ROM CRD-8482B1.05 IntelATA Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
LG CD-ROM CRD-8482B E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392496kB)
Free physical memory: 20MB (21088kB)
Memory in use : 94 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.8.2005
ISO compilation
22:58:02 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

22:58:02 #2 Text 0 File Reader.cpp, Line 127
Reader running

22:58:02 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running

22:58:02 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

22:58:02 #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

22:58:02 #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1793839 (398:37.64, 3503MB)

22:58:02 #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)

22:58:02 #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193

22:58:02 #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:58:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1793840 (1793840) = #1793840/398:37.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1793840 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

22:58:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3673784320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1793840 | lead-out | 1 | 0x41 | 0x00

22:58:04 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

22:58:04 #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.

22:58:04 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

22:58:04 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)

22:58:04 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22:58:04 #17 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode

22:58:04 #18 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

22:58:04 #19 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: Yes

22:58:04 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

22:58:05 #21 SCSI -31 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BB70000
Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

22:58:05 #22 SCSI -31 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06EB1200
Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

22:58:05 #23 Text 0 File Mmc.cpp, Line 19295
Writer-Buffer for LITE-ON DVDRW SOHW-1633S\H1 T0 reduced to 32768Bytes

22:58:05 #24 SCSI -31 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06EB1200
Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

22:58:05 #25 CDR -31 File Writer.cpp, Line 311
Buffer too large
LITE-ON DVDRW SOHW-1633S\H1 T0

22:58:05 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

22:58:05 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

22:58:06 #28 Text 0 File DVDR.cpp, Line 2749
EndDAO: Last written address was -1

22:58:06 #29 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 01/11/2004 03:12:18
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 01/11/2004 03:12:18
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:09 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 2, 3, size=99568 bytes, created 24/03/2004 18:44:50 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 2, 3, size=27664 bytes, created 24/03/2004 18:45:22 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 2, 3, size=9561 bytes, created 24/03/2004 18:45:02 (InCD4 driver for win NT/2K/XP)
File 'Drivers\IntelATA.sys': Ver=6.01.008, 05/30/2000, size=118480 bytes, created 30/05/2000 01:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[ + quote]

MilesAhed

Member

14. August 2005 @ 14:45

Link to this message

I'm no expert but it looks like you have Multisession option set. To burn playable DVDs you need to burn a DVD-Video, not a multisession data dvd. Until you get more into video encoding and whatnot you might try just putting your .AVI file through VSO DivXtoDVD and burning a DVD Video from the VIDEO_TS folder it produces. I know some people like to try to do everything with Nero but for myself I try to get things to a file set or image ready to burn and just burn with Nero Burning Rom.

At least then you know you don't have some problem burning discs. Then if you want to use the Nero video software at least you know the burning part works. :)

[ + quote]

hotrodbx

Newbie

15. August 2005 @ 11:45

Link to this message

Thanx. I'll try that. Any tips on stopping buffer under runs?

[ + quote]

This message has been edited since posting. Last time this message was edited on 15. August 2005 @ 11:56

creaky

Moderator

15. August 2005 @ 14:50

Link to this message

@hotrodbx -

Quote:
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S

- that's a good start, the burner's firmare (BS0S) is up to date

Quote:
DiskPeripheral : Maxtor 6Y080P0 YAR4 IntelATA Port 0 ID 0 DMA: Off
DiskPeripheral : QUANTUM FIREBALLlct2 APL. IntelATA Port 0 ID 1 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1633SBS0S IntelATA Port 1 ID 0 DMA: Off
CdRomPeripheral : LG CD-ROM CRD-8482B1.05 IntelATA Port 1 ID 1 DMA: Off

- DMA needs to be ON. fix via this - http://home.comcast.net/~bbmayo/FAQ.htm

Quote:
Physical memory : 383MB (392496kB)
Free physical memory: 20MB (21088kB)
Memory in use : 94 %

- wow, virtually no free memory. you need to close down as many programs as you can prior to burns

Quote:
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193

- get decent media (see my signature for ideas, 'fraid this is subpar media

Quote:
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 01/11/2004 03:12:18
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 01/11/2004 03:12:18
File 'Drivers\InCDfs.SYS': Ver=4, 2, 2, 3, size=99568 bytes, created 24/03/2004 18:44:50 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 2, 3, size=27664 bytes, created 24/03/2004 18:45:22 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 2, 3, size=9561 bytes, created 24/03/2004 18:45:02 (InCD4 driver for win NT/2K/XP)

- a-ha, another problem. you have 2 different types of paket writing software, Nero's InCD AND Roxio software. If you don't use either of these, uninstall Roxio, and for Nero, uninstall Nero, uninstall Nero completely via Nero Clean Tools - " Nero.com/en/Clean_Tools.html" class="korostus" target="_blank">http://www.Nero.com/en/Clean_Tools.html ", then install Nero, BUT WITHOUT installing InCd

[ + quote]

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

hotrodbx

Newbie

19. August 2005 @ 15:48

Link to this message

@creaky

thanx.

I still can't get the DMA option to appear. I'm using Win 2000

[ + quote]

creaky

Moderator

20. August 2005 @ 03:54

Link to this message

have you followed all the other suggestions though, for now. what didn't work re the DMA fix ?

[ + quote]

f00dl3

Suspended permanently

20. August 2005 @ 05:11

Link to this message

Try uninstalling, installing the original CD version of Nero 6, and NOT updating. This is the same problem I had with Nero 6.6.x and my HP dvd writer dvd200i drive.

[ + quote]

The DMCA - Stripping your rights away, one at a time.

creaky

Moderator

20. August 2005 @ 05:13

Link to this message

@f00dl3 - that's not good advice i'm afraid.. i've also replied to your own post here - http://forums.afterdawn.com/thread_view.cfm/223732

using an old version may have worked for you, but you've more than likely got around the actual issue instead of addressing the root cause. i and most other people will always recommend people update their software due to bugfixes/compatability etc

[ + quote]

This message has been edited since posting. Last time this message was edited on 20. August 2005 @ 05:50

Start a new thread

afterdawn.com > forums > software specific discussion > nero discussion > buffer too large!!! + buffer under runs!!!


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.