|
|
|
nero error: Could not perform EndTrack
|
|
|
betoche
Newbie
|
15. August 2005 @ 10:37 |
Link to this message
|
|
When I try to write a data CD, I get the "Could not perform EndTrack" error message and this happens a lot! almost every once in a while I AM ABLE to write a CD correctly (sometimes the same CD which had problem previously!). I unistalled the older version and installed the 6.6.0.13 version. I have the windows xp pro and also I have the service pack 2 installed, I don't know if this is something related to O/S or not? I'd appreciate it anybody knows what's going on? Thank you.....
|
|
Advertisement
|
|
|
|
Staff Member
4 product reviews
|
15. August 2005 @ 13:15 |
Link to this message
|
|
Try putting less on the cd, as sometimes you cut it too close when burning and it cannot complete the end track (lead out).
|
|
betoche
Newbie
|
15. August 2005 @ 21:05 |
Link to this message
|
|
Thanks for replying. But I still get the same error when I try to write the files as small as 200MB or something....
|
Moderator
|
15. August 2005 @ 22:33 |
Link to this message
|
post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
betoche
Newbie
|
16. August 2005 @ 07:43 |
Link to this message
|
|
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'E:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
Recorder: <HL-DT-ST RW/DVD GCC-4243N>Version: A102 - HA 0 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST RW/DVD GCC-4243N>Version: A102 - HA 0 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 0 ID 0 DMA: On
DiskPeripheral : TOSHIBA MK3021GAS atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4243N G: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261460kB)
Free physical memory: 42MB (43440kB)
Memory in use : 83
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.8.2005
CD-ROM (ISO)
11:35:23 AM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:35:24 AM #2 Text 0 File Burncd.cpp, Line 2882
HL-DT-ST RW/DVD GCC-4243N
Buffer underrun protection activated
11:35:24 AM #3 Text 0 File Reader.cpp, Line 127
Reader running
11:35:24 AM #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST RW/DVD GCC-4243N running
11:35:24 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
11:35:24 AM #6 Text 0 File Burncd.cpp, Line 3167
Turn on Track-At-Once, using CD-R/RW media
11:35:25 AM #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 113058 ( 25:09.33)
11:35:25 AM #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
11:35:25 AM #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: HL-DT-ST RW/DVD GCC-4243N;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
11:35:25 AM #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:35:25 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 113059 (113059) = #113059/25:7.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 113057 blocks [HL-DT-ST RW/DVD GCC-4243N]
--------------------------------------------------------------
11:35:25 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST RW/DVD GCC-4243N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 231852032, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
113059 | lead-out | 1 | 0x41 | 0x00
11:35:25 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 113059 -> 113057.
11:35:27 AM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:35:52 AM #15 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
11:35:52 AM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:35:52 AM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (2,400 KB/s)
11:35:52 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:35:52 AM #19 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON
11:38:22 AM #20 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03760000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x0D 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
11:38:22 AM #21 CDR -1135 File Writer.cpp, Line 311
Write error
11:38:22 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:38:23 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:38:23 AM #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
HL-DT-ST RW/DVD GCC-4243N\H0 T0
11:38:23 AM #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
11:38:24 AM #26 Text 0 File Mmc.cpp, Line 16119
<HL-DT-STRW/DVD GCC-4243N> start Close Session
11:38:26 AM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (2,400 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
16. August 2005 @ 09:46 |
Link to this message
|
@betoche -
Quote:
Recorder: <HL-DT-ST RW/DVD GCC-4243N>Version: A102
- the firmware your burner needs depends on which PC/drive you have -
version 1.08 - this is for HP machines - http://h18007.www1.hp.com/support/files/hpcpqnk/us/download/22745.html
or look down the page for your drive here - http://tdb.rpc1.org/ -
Support for multiple OEM derivatives (A103 (DELL), 1.00, 1.01 (Toshiba), 1.02 (Acer) and 1.07 (HP/Compaq)) -
Snippet from the readme file from the 2nd option - Quote:
L DELL A103 30-Aug-2004 LA13xxxx.EXE
H 1.00 20-Jun-2004 H100xxxx.EXE
C ACER 1.02 26-Feb-2004 C102xxxx.EXE
C COMPAQ/HP 1.07 20-Jun-2004 C107xxxx.EXE
T TOSHIBA 1.01 10-Aug-2004 T101xxxx.EXE
http://tdb.rpc1.org/
Quote:
Physical memory : 255MB (261460kB)
Free physical memory: 42MB (43440kB)
Memory in use : 83
- 256MB is barely sufficiengt for Windows XP, never mind DVD work on top. you'll have to free up lots more memory, especially as you only have 256MB
Quote:
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
- did you mean to d a multisession disc ?
Quote:
Recorder: HL-DT-ST RW/DVD GCC-4243N;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
- if sorting out the firmware doesn't work, try better media
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Write error
Invalid write state
Could not perform EndTrack
- see previous comment
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 16. August 2005 @ 09:47
|
|
Stiiv
Newbie
|
21. August 2005 @ 01:19 |
Link to this message
|
|
That same error comes to me also. First i got "Could not perform end of Disc-at-once" problem but after I updated nero, firmware and aspi, it started to work couple of times. But now i got all the time "Could not perform EndTrack" error. It comes whatever I burn or how much, i don't even run any other programs during the burning. Would be great if someone could help me. Here is the log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15h
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 2 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 2 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 636MB (651484kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2005
CD-ROM (ISO)
12:05:20 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:05:20 #2 Text 0 File Burncd.cpp, Line 2946
HL-DT-ST DVDRAM GSA-4163B
Buffer underrun protection activated
12:05:20 #3 Text 0 File Reader.cpp, Line 127
Reader running
12:05:20 #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
12:05:20 #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:05:20 #6 Text 0 File Burncd.cpp, Line 3231
Turn on Track-At-Once, using CD-R/RW media
12:05:21 #7 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 69912 ( 15:34.12)
12:05:21 #8 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
12:05:21 #9 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: HL-DT-ST DVDRAM GSA-4163B;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
12:05:21 #10 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:05:21 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 69913 (69913) = #69913/15:32.13
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 69911 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
12:05:21 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 143489024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
69913 | lead-out | 1 | 0x41 | 0x00
12:05:21 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 69913 -> 69911.
12:05:21 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:05:21 #15 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
12:05:21 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:05:21 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 32x (4 800 KB/s)
12:05:21 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:05:21 #19 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Buffer underrun protection -> ON
12:06:21 #20 SCSI -1093 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0BAB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x78 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x3C 0x30 0x00 0x80 0x02 0x00
12:06:21 #21 CDR -1093 File Writer.cpp, Line 311
No seek complete
12:06:21 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:06:21 #23 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x3C 0x30 0x00 0x80 0x02 0x00
12:06:21 #24 CDR -1093 File WriterStatus.cpp, Line 197
No seek complete
12:06:21 #25 TRANSFER -18 File WriterStatus.cpp, Line 197
Could not perform EndTrack
12:06:21 #26 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
HL-DT-ST DVDRAM GSA-4163B\H2 T0
12:06:21 #27 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
12:06:21 #28 Text 0 File Mmc.cpp, Line 16311
<HL-DT-STDVDRAM GSA-4163B> start Close Session
12:06:21 #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 32x (4 800 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.3.2005 1:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29.8.2002 11:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 21. August 2005 @ 01:20
|
Moderator
|
21. August 2005 @ 02:40 |
Link to this message
|
@Stiiv -
Quote:
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103
- firmware is 2 versions behind, A105 is here - http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=16
Quote:
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
- if firmware and lowering speed doesn't help, try different media
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
No seek complete
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
No seek complete
Could not perform EndTrack
Invalid write state
Could not perform EndTrack
- see previous comment
Quote:
Burn process failed at 32x (4 800 KB/s)
- try 24x, maybe 16x
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Matexusa
Newbie
|
2. September 2005 @ 07:09 |
Link to this message
|
|
Need to do few things. First, you need to stop using cheap CD or change your CD. Secondly, use this expensive tool called "blow air using your mouth" on your Writer lens and your back to writing CDs!
Note Before:
You have to make sure that your system's drivers have all been updated as well.
Knowledge is not being able to retain information rather, knowing where and how to get it.
|
|
Wakpa
Newbie
|
4. September 2005 @ 08:44 |
Link to this message
|
Thanks Matexusa. Boy do I feel embarrassed. I've been haveing this error for a while and spent the last three days with Windows help and Nero and what not which led me here.
I blew on the lense like Mate said and I am back to burning.
Again, Thanks for bringing me back to the basics.
|
Moderator
|
4. September 2005 @ 08:59 |
Link to this message
|
|
that's good for the moment, but it's a short-term fix. keep the other recommendations in mind for when you have more problems.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Advertisement
|
|
|
|
Srv2
Newbie
|
14. September 2005 @ 13:15 |
Link to this message
|
I've been getting this same message and I need to copy files between my different computers at work, home, and my network disconnected SAFEcomputer at home.
//EDIT: lol here's my log:
Quote:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Nero version: 6.3.1.25 (Nero Express)
Recorder: <IDE-CD R/RW 12x8x32> Version: N3.8 - HA 1 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 4096kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-148F >Version: PS06 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD205AA atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST340015A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148F atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : IDE-CD R/RW 12x8x32 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 2 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-148F F: CDRom0
IDE-CD R/RW 12x8x32 G: CDRom1
Generic DVD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3
Generic DVD-ROM J: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522992kB)
Free physical memory: 114MB (117016kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.9.2005
CD-ROM (ISO)
22:07:40 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:07:40 #2 Phase 87 File dlgbrnst.cpp, Line 1855
Seamless Link activated
22:07:40 #3 Text 0 File Reader.cpp, Line 126
Reader running
22:07:40 #4 Text 0 File Writer.cpp, Line 124
Writer IDE-CD R/RW 12x8x32 running
22:07:40 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
22:07:40 #6 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using CD-R/RW media
22:07:40 #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 328589 ( 73:03.14)
22:07:40 #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
22:07:40 #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IDE-CD R/RW 12x8x32;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
22:07:40 #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:07:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 328590 (328590) = #328590/73:1.15
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 328588 blocks [IDE-CD R/RW 12x8x32 ]
--------------------------------------------------------------
22:07:40 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IDE-CD R/RW 12x8x32 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 673259520, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
328590 | lead-out | 1 | 0x00 | 0x41
22:07:40 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 328590 -> 328588.
22:07:40 #14 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
22:07:40 #15 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
22:07:40 #16 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
22:07:40 #17 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 12x (1,800 KB/s)
22:07:40 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:07:40 #19 Text 0 File Mmc.cpp, Line 20660
Set BUFE: Seamless Link -> ON
22:08:49 #20 SCSI -1106 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0A1B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x06 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x13
0x00 0x00 0x00 0x00 0x73 0x03
22:08:49 #21 CDR -1106 File Writer.cpp, Line 304
Power calibration error
22:08:49 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
22:08:49 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
22:08:49 #24 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
IDE-CD R/RW 12x8x32\H1 T1
22:08:49 #25 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack
22:08:49 #26 Text 0 File Mmc.cpp, Line 15480
<IDE-CD R/RW 12x8x32 > start Close Session
22:08:49 #27 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
22:08:49 #28 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 12x (1,800 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
This message has been edited since posting. Last time this message was edited on 14. September 2005 @ 13:18
|
|
