|
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
Recorder: <SONY DVD RW DRU-510A> Version: 1.1a - HA 2 TA 0 - 6.6.0.13
Adapter driver: <> HA 2
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PHILIPS CDRW/DVD SCB5265>Version: TD15 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS548040M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDRW/DVD SCB5265 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PHILIPS CDRW/DVD SCB5265 E: CDRom0
SONY DVD RW DRU-510A F: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522456kB)
Free physical memory: 150MB (154436kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.8.2005
DVD-Copy on the fly
3:27:45 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
3:27:45 PM #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-510A running
3:27:45 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1717328 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
3:27:45 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1717328 = 1717328, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
3:27:45 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
3:27:46 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1717327 (381:37.52, 3354MB)
3:27:46 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
3:27:46 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
3:27:46 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:27:46 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1717328 (1717328) = #1717328/381:37.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1717328 blocks [SONY DVD RW DRU-510A]
--------------------------------------------------------------
3:27:46 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3517087744, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1717328 | lead-out | 1 | 0x41 | 0x00
3:27:46 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
3:27:47 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
3:27:47 PM #14 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode for Multisession
3:27:47 PM #15 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Power-Burn -> ON
3:27:47 PM #16 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: No
3:27:47 PM #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:28:48 PM #18 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04260000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x08 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0xFF 0xFD 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x73 0x03
3:28:48 PM #19 CDR -1106 File Writer.cpp, Line 311
Power calibration error
3:28:48 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:28:48 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:28:51 PM #22 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 2239
3:28:51 PM #23 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
3:28:51 PM #24 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x04
3:28:51 PM #25 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
3:28:51 PM #26 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
3:28:51 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
