|
Dear Forum....
I thought i was quite a capable cd/dvd burner and have never had any problems like this before.....But for some reason the Nero 6 SE software keeps failing my dvd's. The cds burn perfectly but the Dvds keep failing and i have starting to run out of hair to pull out, as i have wasted around 10 blank dvd's tring to burn 1 simple compilation... All im trying to do is put some home videos in .avi format onto a 4.7Gb dvd. I have been doing the simulations and determineing the maximum speed and nothing works... The cd gets to about 25 to 50 complete and says "burn process failed..." I have enclosed the error log. If anyone would like to suggest a reason for this thing screwing up all the time..It would be very much appreciated..
(p.s. The media manufacturers of the dvd's i have used were from 3 different manufacturers, and i have used them all succsfully before. So i have ruled out cheapy media.)
______________________________________________________________________
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 02:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <PIONEER DVD RW DVR-107D>Version: 1.05 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <IDE DVD-ROM 16X >Version: 7.92 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : ST3200021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD RW DVR-107D atapi Port 1 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP1604N atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
IDE DVD-ROM 16X G: CDRom0
PIONEER DVD RW DVR-107D H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 181MB (186000kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.8.2005
ISO compilation
13:19:17 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:19:17 #2 Text 0 File Reader.cpp, Line 127
Reader running
13:19:17 #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD RW DVR-107D running
13:19:17 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
13:19:18 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
13:19:18 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2241279 (498:03.54, 4377MB)
13:19:18 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
13:19:18 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD RW DVR-107D, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193
13:19:18 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:19:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2241280 (2241280) = #2241280/498:3.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2241280 blocks [PIONEER DVD RW DVR-107D]
--------------------------------------------------------------
13:19:18 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD RW DVR-107D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4590141440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2241280 | lead-out | 1 | 0x41 | 0x00
13:19:18 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
13:19:18 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
13:19:18 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
13:19:18 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)
13:19:25 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:19:25 #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
13:19:25 #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
13:19:25 #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: No
13:19:25 #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
13:19:28 #21 Text 0 File Cdrdrv.cpp, Line 1286
13:19:28.140 - PIONEER DVD RW DVR-107D\H1 T0 : Queue again later
13:19:28 #22 Text 0 File Cdrdrv.cpp, Line 1286
13:19:28.453 - PIONEER DVD RW DVR-107D\H1 T0 : Queue again later
13:19:28 #23 Text 0 File Cdrdrv.cpp, Line 1286
13:19:28.609 - PIONEER DVD RW DVR-107D\H1 T0 : Queue again later
13:23:27 #24 Text 0 File Cdrdrv.cpp, Line 1286
13:23:27.453 - PIONEER DVD RW DVR-107D\H1 T0 : Queue again later
13:28:14 #25 Text 0 File Cdrdrv.cpp, Line 1286
13:28:14.796 - PIONEER DVD RW DVR-107D\H1 T0 : Queue again later
13:33:16 #26 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD RW DVR-107D> start writing Lead-Out at LBA 2241280 (223300h), lenght 0 blocks
13:33:17 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:33:17 #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2241279
13:33:26 #29 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5,540 KB/s)
13:33:27 #30 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
13:33:27 #31 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:33:27 #32 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
13:33:27 #33 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
13:33:27 #34 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: No
13:33:27 #35 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
13:33:28 #36 Text 0 File Cdrdrv.cpp, Line 1286
13:33:28.890 - PIONEER DVD RW DVR-107D\H1 T0 : Queue again later
13:33:51 #37 Text 0 File Cdrdrv.cpp, Line 1286
13:33:51.828 - PIONEER DVD RW DVR-107D\H1 T0 : Queue again later
13:36:47 #38 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07BB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x07 0x8D 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x07 0x8B 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00
13:36:47 #39 CDR -1135 File Writer.cpp, Line 311
Write error
13:36:47 #40 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:36:48 #41 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
13:36:48 #42 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 495007
13:36:52 #43 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
13:37:24 #44 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 01:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 19:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)
|
