Power outage.............now no/slow burn, no buffer level

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Monday 17.2.2025 / 09:25

Search AfterDawn Forums:

afterdawn.com > forums > software specific discussion > nero discussion > power outage.............now no/slow burn, no buffer level

Browse by topic

Forums

Start a new thread

Power outage.............now no/slow burn, no buffer level

Jump to:

Posted

Message

pjack

Newbie

22. August 2005 @ 06:06

Link to this message

Over the weekend I was burning a movie when the power went out in the middle of my burn. As soon as I got everything set back up, the lights blinked again causing another outage in the middle of the burn. Now Nero is burning very, very slow and the buffer level is not moving at all. I waited about 20 minutes for a burn last night and got a process failed message at the end of the burn. Are there any troubleshooting tips for me out there or tips on what I could do to get Nero back up and running. Thank in advance for any response.

[ + quote]

scf_au

AfterDawn Addict

22. August 2005 @ 06:49

Link to this message

Try go back to an earlier restore point before the outages. Also, check to see if 'DMA' remains on.

Alternatively, post a log.

[ + quote]

pjack

Newbie

23. August 2005 @ 04:12

Link to this message

thanks scf_au. I tried restore and my DMA is on. How do I retrieve my log?

[ + quote]

scf_au

AfterDawn Addict

23. August 2005 @ 05:01

Link to this message

Try search for 'NeroHistory.log' inside the various Nero program folders (e.g. Nero, Nero Vision).

P.S.: Remember to delete the serial no. before posting.

[ + quote]

This message has been edited since posting. Last time this message was edited on 23. August 2005 @ 05:18

pjack

Newbie

23. August 2005 @ 11:21

Link to this message

I attempted to locate Nero and it's not in the program files or through explore but in the control panel only allowing me to Remove. What else can I try?

[ + quote]

pjack

Newbie

23. August 2005 @ 14:13

Link to this message

Found it I think:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 117MB (120628kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.8.2005
===== Disc-Copy over image - 1st step : Copy to image ...

5:40:22 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

5:40:22 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

5:40:22 PM #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 369296 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

5:40:22 PM #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 369296 = 369296, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

5:40:22 PM #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

5:40:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 369295 ( 82:03.70, 721MB)

5:40:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

5:40:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

5:40:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:40:23 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 369296 (369296) = #369296/82:3.71
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 369296 blocks [ Image Recorder ]
--------------------------------------------------------------

5:40:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 756625408, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
369296 | lead-out | 1 | 0x00 | 0x41

5:40:23 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

5:40:23 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:43:29 PM #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 369296 (5A290h), lenght 0 blocks

5:43:30 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:43:31 PM #16 Phase 121 File dlgbrnst.cpp, Line 1836
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

5:43:47 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

5:43:47 PM #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running

5:43:47 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 756625408
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=82:03.71 ( 369296)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\
5:43:47 PM #4 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

5:45:11 PM #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 369295 ( 82:03.70, 721MB)

5:45:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

5:45:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

5:45:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

5:45:11 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 369296 (369296) = #369296/82:3.71
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 369296 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

5:45:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 756318208, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
369296 | lead-out | 1 | 0x00 | 0x41

5:45:11 PM #11 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,520 KB/s)

5:45:11 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:45:11 PM #13 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

5:45:11 PM #14 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 3:24,728 (204728ms) -> OK

5:45:11 PM #15 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

5:48:03 PM #16 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 369296 (5A290h), lenght 0 blocks

5:48:04 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:48:08 PM #18 Phase 127 File dlgbrnst.cpp, Line 1836
Generating DVD high compatibility borders

5:48:23 PM #19 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

5:48:23 PM #20 Phase 129 File dlgbrnst.cpp, Line 1836
Generating DVD borders completed successfully

5:48:23 PM #21 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

5:48:23 PM #22 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,520 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 101MB (103880kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.8.2005
===== Disc-Copy over image - 1st step : Copy to image ...

4:34:00 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

4:34:00 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

4:34:00 PM #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 486432 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

4:34:00 PM #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 486432 = 486432, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

4:34:00 PM #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

4:34:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 486431 (108:05.56, 950MB)

4:34:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

4:34:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

4:34:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:34:01 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 486432 (486432) = #486432/108:5.57
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 486432 blocks [ Image Recorder ]
--------------------------------------------------------------

4:34:01 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 996519936, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
486432 | lead-out | 1 | 0x00 | 0x41

4:34:01 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

4:34:02 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:37:36 PM #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 486432 (76C20h), lenght 0 blocks

4:37:36 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:37:37 PM #16 Phase 121 File dlgbrnst.cpp, Line 1836
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

4:37:51 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

4:37:51 PM #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running

4:37:51 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 996519936
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=108:05.57 ( 486432)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\
4:37:52 PM #4 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

4:38:16 PM #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 486431 (108:05.56, 950MB)

4:38:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

4:38:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

4:38:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

4:38:16 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 486432 (486432) = #486432/108:5.57
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 486432 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

4:38:16 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 996212736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
486432 | lead-out | 1 | 0x00 | 0x41

4:38:16 PM #11 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,520 KB/s)

4:38:16 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:38:16 PM #13 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

4:38:16 PM #14 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 3:27,963 (207963ms) -> OK

4:38:16 PM #15 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

4:41:49 PM #16 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 486432 (76C20h), lenght 0 blocks

4:41:49 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:42:07 PM #18 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

4:42:07 PM #19 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

4:42:07 PM #20 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,520 KB/s)

4:42:42 PM #21 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 486431 (108:05.56, 950MB)

4:42:42 PM #22 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

4:42:42 PM #23 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

4:42:42 PM #24 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:42:42 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 996212736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
486432 | lead-out | 1 | 0x00 | 0x41

4:42:42 PM #26 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,520 KB/s)

4:42:42 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:42:42 PM #28 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

4:42:42 PM #29 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 3:27,963 (207963ms) -> OK

4:42:42 PM #30 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

4:46:14 PM #31 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 486432 (76C20h), lenght 0 blocks

4:46:14 PM #32 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:46:32 PM #33 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

4:46:32 PM #34 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

4:46:32 PM #35 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,520 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 114MB (116984kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.8.2005
===== Disc-Copy over image - 1st step : Copy to image ...

4:48:19 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

4:48:19 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

4:48:19 PM #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 494176 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

4:48:19 PM #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 494176 = 494176, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

4:48:19 PM #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

4:48:19 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 494175 (109:49.00, 965MB)

4:48:19 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

4:48:19 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

4:48:19 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:48:19 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 494176 (494176) = #494176/109:49.1
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 494176 blocks [ Image Recorder ]
--------------------------------------------------------------

4:48:19 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1012379648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
494176 | lead-out | 1 | 0x00 | 0x41

4:48:19 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

4:48:19 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:54:57 PM #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks

4:54:57 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:54:58 PM #16 Phase 121 File dlgbrnst.cpp, Line 1836
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

4:55:15 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

4:55:15 PM #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running

4:55:15 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1012379648
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=109:49.01 ( 494176)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\
4:55:16 PM #4 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

4:55:41 PM #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 494175 (109:49.00, 965MB)

4:55:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

4:55:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

4:55:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

4:55:41 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 494176 (494176) = #494176/109:49.1
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 494176 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

4:55:41 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1012072448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
494176 | lead-out | 1 | 0x00 | 0x41

4:55:42 PM #11 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,520 KB/s)

4:55:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:55:42 PM #13 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

4:55:42 PM #14 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 3:30,758 (210758ms) -> OK

4:55:42 PM #15 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

4:59:21 PM #16 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks

4:59:21 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:59:40 PM #18 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

4:59:40 PM #19 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

4:59:40 PM #20 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,520 KB/s)

5:00:08 PM #21 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 494175 (109:49.00, 965MB)

5:00:08 PM #22 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

5:00:08 PM #23 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

5:00:08 PM #24 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:00:08 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1012072448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
494176 | lead-out | 1 | 0x00 | 0x41

5:00:08 PM #26 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,520 KB/s)

5:00:09 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:00:09 PM #28 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

5:00:09 PM #29 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 3:30,758 (210758ms) -> OK

5:00:09 PM #30 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

5:03:43 PM #31 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks

5:03:43 PM #32 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:04:02 PM #33 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

5:04:02 PM #34 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

5:04:02 PM #35 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,520 KB/s)

5:05:25 PM #36 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 494175 (109:49.00, 965MB)

5:05:25 PM #37 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

5:05:25 PM #38 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

5:05:25 PM #39 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:05:25 PM #40 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1012072448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
494176 | lead-out | 1 | 0x00 | 0x41

5:05:25 PM #41 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,520 KB/s)

5:05:25 PM #42 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:05:25 PM #43 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

5:05:25 PM #44 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 3:30,758 (210758ms) -> OK

5:05:25 PM #45 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

5:09:26 PM #46 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks

5:09:26 PM #47 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:09:44 PM #48 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

5:09:44 PM #49 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

5:09:44 PM #50 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,520 KB/s)

5:10:39 PM #51 SCSI -500 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

5:10:58 PM #52 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 494175 (109:49.00, 965MB)

5:10:58 PM #53 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

5:10:58 PM #54 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

5:10:58 PM #55 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:10:58 PM #56 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1012072448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
494176 | lead-out | 1 | 0x00 | 0x41

5:10:58 PM #57 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,520 KB/s)

5:10:58 PM #58 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:10:58 PM #59 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

5:10:58 PM #60 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 3:30,758 (210758ms) -> OK

5:10:58 PM #61 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

5:14:58 PM #62 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks

5:14:58 PM #63 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:15:17 PM #64 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

5:15:17 PM #65 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

5:15:17 PM #66 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,520 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 128MB (131260kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.8.2005
===== Disc-Copy over image - 1st step : Copy to image ...

12:24:04 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

12:24:04 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

12:24:04 PM #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2075360 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

12:24:04 PM #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 2075360 = 2075360, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

12:24:04 PM #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

12:24:04 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2075359 (461:11.34, 4053MB)

12:24:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

12:24:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

12:24:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:24:04 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2075360 (2075360) = #2075360/461:11.35
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2075360 blocks [ Image Recorder ]
--------------------------------------------------------------

12:24:04 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4250644480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2075360 | lead-out | 1 | 0x00 | 0x41

12:24:04 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

12:24:05 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:36:37 PM #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2075360 (1FAAE0h), lenght 0 blocks

12:36:37 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:36:38 PM #16 Phase 121 File dlgbrnst.cpp, Line 1836
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

12:36:50 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

12:36:50 PM #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running

12:36:50 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -44322816
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=461:11.35 ( 2075360)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Pamela Jackson\My Documents\TempImage.nrg>

12:36:50 PM #4 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

12:45:08 PM #5 SCSI -500 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

12:45:27 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2075359 (461:11.34, 4053MB)

12:45:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

12:45:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

12:45:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

12:45:27 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2075360 (2075360) = #2075360/461:11.35
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2075360 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

12:45:27 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4250337280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2075360 | lead-out | 1 | 0x00 | 0x41

12:45:27 PM #12 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,520 KB/s)

12:45:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:45:27 PM #14 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

12:45:27 PM #15 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 13:01,583 (781583ms) -> OK

12:45:27 PM #16 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

12:59:13 PM #17 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2075360 (1FAAE0h), lenght 0 blocks

12:59:13 PM #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:59:36 PM #19 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

12:59:36 PM #20 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

12:59:36 PM #21 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,520 KB/s)

1:03:36 PM #22 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2075359 (461:11.34, 4053MB)

1:03:36 PM #23 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

1:03:36 PM #24 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

1:03:36 PM #25 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:03:36 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4250337280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2075360 | lead-out | 1 | 0x00 | 0x41

1:03:36 PM #27 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,520 KB/s)

1:03:36 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

1:03:36 PM #29 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

1:03:36 PM #30 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 13:01,583 (781583ms) -> OK

1:03:36 PM #31 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

1:17:53 PM #32 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2075360 (1FAAE0h), lenght 0 blocks

1:17:53 PM #33 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

1:18:18 PM #34 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

1:18:18 PM #35 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

1:18:18 PM #36 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,520 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.11
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 57MB (59068kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.8.2005
DVD-Copy over Image
3:20:14 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

3:20:14 PM #2 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 583904 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

3:20:14 PM #3 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 583904 = 583904, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

3:20:14 PM #4 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

3:20:14 PM #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 583903 (129:45.28, 1140MB)

3:20:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

3:20:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

3:20:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:20:15 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 583904 (583904) = #583904/129:45.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 583904 blocks [ Image Recorder ]
--------------------------------------------------------------

3:20:15 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1196142592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
583904 | lead-out | 1 | 0x00 | 0x41

3:20:15 PM #11 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

3:20:16 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:20:16 PM #13 Phase 40 File dlgbrnst.cpp, Line 1531
Aborted by user

3:20:18 PM #14 Phase 68 File dlgbrnst.cpp, Line 1836
Burn process aborted

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.11
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 18MB (18648kB)
Memory in use : 92 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.8.2005
DVD-Copy over Image
3:22:06 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

3:22:06 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

3:22:06 PM #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 583904 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

3:22:06 PM #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 583904 = 583904, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

3:22:06 PM #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

3:22:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 583903 (129:45.28, 1140MB)

3:22:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

3:22:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

3:22:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:22:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 583904 (583904) = #583904/129:45.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 583904 blocks [ Image Recorder ]
--------------------------------------------------------------

3:22:07 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1196142592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
583904 | lead-out | 1 | 0x00 | 0x41

3:22:07 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

3:22:07 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:26:41 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04CB1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x08 0xE8 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

3:26:48 PM #15 SCSI -1128 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04CB1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x08 0xE8 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

3:26:48 PM #16 TRANSFER -25 File Reader.cpp, Line 371
Error reading data

3:26:48 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

3:26:49 PM #18 Phase 67 File dlgbrnst.cpp, Line 1836
Burn process failed

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 108MB (110800kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.8.2005
===== Disc-Copy over image - 1st step : Copy to image ...

3:31:18 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

3:31:18 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

3:31:18 PM #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 494176 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

3:31:18 PM #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 494176 = 494176, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

3:31:18 PM #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

3:31:18 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 494175 (109:49.00, 965MB)

3:31:18 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

3:31:18 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

3:31:18 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:31:18 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 494176 (494176) = #494176/109:49.1
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 494176 blocks [ Image Recorder ]
--------------------------------------------------------------

3:31:18 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1012379648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
494176 | lead-out | 1 | 0x00 | 0x41

3:31:18 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

3:31:18 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:38:52 PM #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks

3:38:52 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

3:38:53 PM #16 Phase 121 File dlgbrnst.cpp, Line 1836
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

3:39:21 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

3:39:21 PM #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running

3:39:23 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1012379648
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=109:49.01 ( 494176)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\
3:39:23 PM #4 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

3:42:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 494175 (109:49.00, 965MB)

3:42:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

3:42:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

3:42:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

3:42:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 494176 (494176) = #494176/109:49.1
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 494176 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

3:42:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1012072448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
494176 | lead-out | 1 | 0x00 | 0x41

3:42:38 PM #11 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,520 KB/s)

3:42:39 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:42:39 PM #13 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

3:42:39 PM #14 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 3:30,758 (210758ms) -> OK

3:42:39 PM #15 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes

3:46:14 PM #16 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks

3:46:14 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

3:46:32 PM #18 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

3:46:32 PM #19 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

3:46:32 PM #20 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,520 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.11
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 27MB (28336kB)
Memory in use : 89 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.8.2005
DVD-Copy over Image
10:36:29 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

10:36:30 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

10:36:30 PM #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2274688 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

10:36:30 PM #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 2274688 = 2274688, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

10:36:30 PM #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

10:36:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2274687 (505:29.12, 4442MB)

10:36:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

10:36:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

10:36:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:36:30 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2274688 (2274688) = #2274688/505:29.13
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274688 blocks [ Image Recorder ]
--------------------------------------------------------------

10:36:30 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4658868224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2274688 | lead-out | 1 | 0x00 | 0x41

10:36:30 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

10:36:31 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:50:30 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04CB1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x22 0x41 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:50:35 PM #15 SCSI -1128 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04CB1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x22 0x41 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:50:36 PM #16 TRANSFER -25 File Reader.cpp, Line 371
Error reading data

10:50:36 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:50:37 PM #18 Phase 67 File dlgbrnst.cpp, Line 1836
Burn process failed

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.11
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 165MB (169396kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.8.2005
DVD-Copy over Image
6:38:47 AM #1 Text 0 File Reader.cpp, Line 118
Reader running

6:38:47 AM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

6:38:47 AM #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2274688 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

6:38:47 AM #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 2274688 = 2274688, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

6:38:47 AM #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

6:38:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2274687 (505:29.12, 4442MB)

6:38:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

6:38:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

6:38:47 AM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:38:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2274688 (2274688) = #2274688/505:29.13
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274688 blocks [ Image Recorder ]
--------------------------------------------------------------

6:38:47 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4658868224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2274688 | lead-out | 1 | 0x00 | 0x41

6:38:47 AM #12 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

6:38:47 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

6:41:18 AM #14 Phase 40 File dlgbrnst.cpp, Line 1531
Aborted by user

6:41:21 AM #15 Phase 68 File dlgbrnst.cpp, Line 1836
Burn process aborted

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.11
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 122MB (125240kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.8.2005
DVD-Copy over Image
7:04:27 AM #1 Text 0 File Reader.cpp, Line 118
Reader running

7:04:27 AM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

7:04:27 AM #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2274688 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

7:04:27 AM #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 2274688 = 2274688, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

7:04:27 AM #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

7:04:27 AM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2274687 (505:29.12, 4442MB)

7:04:27 AM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

7:04:27 AM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

7:04:27 AM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:04:27 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2274688 (2274688) = #2274688/505:29.13
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274688 blocks [ Image Recorder ]
--------------------------------------------------------------

7:04:27 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4658868224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2274688 | lead-out | 1 | 0x00 | 0x41

7:04:27 AM #12 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

7:04:28 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:05:47 AM #14 Phase 40 File dlgbrnst.cpp, Line 1531
Aborted by user

7:05:49 AM #15 Phase 68 File dlgbrnst.cpp, Line 1836
Burn process aborted

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

[ + quote]

scf_au

AfterDawn Addict

24. August 2005 @ 05:24

Link to this message

Dear pjack,
Not sure if this is related, but if you check your various burn logs, you'll notice that for the successful burns, the logs always show drive buffer to be equal to 2048kb (which is normal). As for the unsuccessful/aborted burns, the logs show drive buffer to be empty. Maybe you can run e.g Nero InfoTool to check whether your drive buffer is O.K.

[ + quote]

pjack

Newbie

25. August 2005 @ 08:22

Link to this message

Thanks so much for your input, I tried restoring to a much earlier date and problem fixed. Thanks again.

[ + quote]

scf_au

AfterDawn Addict

26. August 2005 @ 06:10

Link to this message

Not at all, glad that it finally works.

[ + quote]

Start a new thread

afterdawn.com > forums > software specific discussion > nero discussion > power outage.............now no/slow burn, no buffer level


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.