|
|
|
Could not perform end of Disc-at-once
|
|
|
Burn-it
Newbie
|
23. August 2005 @ 14:54 |
Link to this message
|
|
Can someone tell me what the problem is here... I think I have somesort of a buffer issue, not sure. HELP!!! please...
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 8/16/2005 8:38:15 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD RW DRU-800A> Version: KY04 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-R2512>Version: 1A04 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2512 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R2512 E: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (392176kB)
Free physical memory: 96MB (98480kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.8.2005
ISO compilation
12:30:51 AM #1 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07480000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x09 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:30:51 AM #2 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0CF81400
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x09 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:30:51 AM #3 Text 0 File Mmc.cpp, Line 19340
Writer-Buffer for SONY DVD RW DRU-800A\H2 T0 reduced to 32768Bytes
12:30:51 AM #4 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03806A00
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x09 0xA0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:30:51 AM #5 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
SONY DVD RW DRU-800A\H2 T0
12:30:51 AM #6 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:30:52 AM #7 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:30:52 AM #8 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2463
12:30:52 AM #9 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03804AF0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:30:52 AM #10 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03804AF0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:30:53 AM #11 CDR -500 File WriterStatus.cpp, Line 167
SCSI command aborted
SONY DVD RW DRU-800A\H2 T0
12:30:53 AM #12 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
12:30:53 AM #13 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03804AF0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:30:53 AM #14 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03804AF0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:30:54 AM #15 CDR -500 File WriterStatus.cpp, Line 172
SCSI command aborted
SONY DVD RW DRU-800A\H2 T0
12:30:54 AM #16 TRANSFER -39 File WriterStatus.cpp, Line 172
Could not perform EndSession
12:30:54 AM #17 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 8/16/2005 8:38:15 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
23. August 2005 @ 16:48 |
Link to this message
|
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2512 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R2512 E: CDRom4
I am not seeing your drive listed, how is it hooked up?
|
|
Burn-it
Newbie
|
23. August 2005 @ 16:55 |
Link to this message
|
|
It's hooked up via iLink from my compaq pc. ilink to Firewire. That's wierd... because I can burn cd-r's and copy DVD's. This log is from when I was trying to make a Data dvd.
|
|
theGeek
Newbie
|
25. August 2005 @ 08:44 |
Link to this message
|
I have this problem. I got XP OS, better here is the log file:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: Version: A103 - HA 1 TA 0 - 6.6.0.8
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: Version: A103 - HA 1 TA 0 - 6.6.0.8
Adapter driver: HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LG CD-ROM CRD-8522B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
LG CD-ROM CRD-8522B E: CDRom0
HL-DT-ST DVDRAM GSA-4163 G: CDRom1
Generic DVD-ROM F: CDRom2
AXV CD/DVD-ROM H: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 244MB (249880kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.8.2005
ISO compilation
7:31:08 PM #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:31:08 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
7:31:08 PM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
7:31:08 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
7:31:08 PM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
7:31:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 356319 ( 79:10.69, 695MB)
7:31:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
7:31:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
7:31:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:31:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 356320 (356320) = #356320/79:10.70
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356320 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
7:31:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 729743360, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
356320 | lead-out | 1 | 0x41 | 0x00
7:31:09 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:31:09 PM #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
7:31:09 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:31:09 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
7:31:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:31:09 PM #17 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode
7:31:09 PM #18 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
7:31:09 PM #19 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
7:31:09 PM #20 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:31:09 PM #21 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type
7:31:36 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x099A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x32 0x4D 0x00 0x0C 0x0C 0x00
7:31:36 PM #23 CDR -1135 File Writer.cpp, Line 311
Write error
7:31:36 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:31:36 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:31:36 PM #26 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was -1
7:31:36 PM #27 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD+R
Book Type setting not supported for the loaded disc type
7:31:36 PM #28 CDR -1135 File WriterStatus.cpp, Line 167
Write error
7:31:36 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
7:31:36 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 1:28:14 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 9/7/2004 4:27:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 9/7/2004 4:27:38 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 9/7/2004 4:29:08 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:07:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Please help me out. I use Memorex DVD-R 4.7GB. I have read that memorex is bad to use but now that I have them I want to be sure that the problem is the dvds and not my computer.
Thanks.
.: theGeek :.
|
Moderator
|
26. August 2005 @ 05:16 |
Link to this message
|
@Burn-it -
Quote:
Nero Version: 6.6.0.8 (Nero Express)
- not too bad, latest is 6.6.0.16
Quote:
Recorder: Version: A103
- A105 is out now. update your firmware from here - http://forum.rpc1.org/dl_firmware.php?download_id=1973
Quote:
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
- atrocious utter rubbish media. we can tweak everything that's necessary to get you burning, but to have watchable movies from then on will require you to buy decent media. CMC Mag media is the absolute pits and will cause you to be back here posting logfiles. Buy decent media.
Quote:
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type
- this is a -R disc, you can't booktype it..
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Write error
EndDAO: Last written address was -1
- bad media. get good media.
Quote:
Book Type request [LG]: DVD+R
Book Type setting not supported for the loaded disc type
- this is a -R disc, you can't booktype it..
Quote:
Write error
- bad media. get good media.
Quote:
Burn process failed at 8x (11,080 KB/s)
- you're torturing that bad media with 8x, try 4x
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 9/7/2004 4:27:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 9/7/2004 4:27:38 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 9/7/2004 4:29:08 PM (InCD4 driver for win NT/2K/XP)
- InCD is Nero's 'packet writing' software, it can interfere. Uninstall Nero, uninstall completely via Nero's Clean Tools - " http://www.nero.com/en/Clean_Tools.html ", install 6.6.0.16 (Update-Package 1) from here - http://www.nero.com/en/nero-up.php, WITHOUT installing InCD.
Quote:
Please help me out. I use Memorex DVD-R 4.7GB. I have read that memorex is bad to use but now that I have them I want to be sure that the problem is the dvds and not my computer.
- i've made all the necessary suggestions to get you burning for a long time to come, IF you stop using crap media :)
Otherwise you'll be back here and i'll taunt the logfiles some more LOL. The only thing to get consistent burns from such media is a wood burner at 500C.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 26. August 2005 @ 05:17
|
|
theGeek
Newbie
|
26. August 2005 @ 07:24 |
Link to this message
|
I have put Nero 6.6.0.16 > thx (didn't know that new vers was out)
I have updated firmware > now A105 > thx(didn't know that new firmware out)
Thansk for the rest of the info. I think the problem was the old firmware and old Nero vers(without InCD) because now I have burn the same DVD's that before didn't work. So many many THANKS Creaky !!!
And I'll not buy any MemoRex from now on. I'll stick to TDK and Verb.
Thanks again dude.
.: theGeek :.
|
|
Advertisement
|
|
|
Moderator
|
26. August 2005 @ 09:00 |
Link to this message
|
|
Nice one, happy burning..
Tweak & burn
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
