|
|
|
Missing files after burning CD
|
|
|
wilims
Newbie
|
28. August 2005 @ 09:17 |
Link to this message
|
|
Folks,
I'm a graphic designer and I use both a Mac running OS X and a PC (running Win2k). I move files--sometimes large files--back and forth between the two platforms every day. Until recently I had fantastic luck burning data CDs for the PC with Roxio Toast on my Mac and data CDs for the Mac with Nero Burning on my PC. Never a problem in two years.
I recently upgraded from Nero 5 to Nero 6 and now I got problems. Even when Nero verifies a CD, that same CD may or may not be recognizable on a Mac. Sometimes the whole CD appears blank, sometimes it won't be readable at all, and sometimes a file or a few files are invisable or missing all together. The CD always works fine if I re-insert it in the PC. I've tried burning using both mode settings and all three ISO settings.
To get around my problem, I've started carrying a little USB flash drive or I borrow a portable hard-drive from work. Just the same, I'd really like to figure out a solution to this problem.
Any thoughts?
Thanks much!
wilims
|
Moderator
|
28. August 2005 @ 10:24 |
Link to this message
|
i think it's time for my proverbial request - post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
wilims
Newbie
|
28. August 2005 @ 10:32 |
Link to this message
|
You got it... Thanks Creaky
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 6:06:00 AM
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.12
Using interface version: 6.6.0.8
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 12c
Recorder: <ATAPI DVD RW 8XMax> Version: 150D - HA 1 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00DUA3 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ATAPI DVD RW 8XMax atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVD RW 8XMax E: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 206MB (211696kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.8.2005
NeroAPI
10:35:47 PM #1 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
10:35:47 PM #2 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:35:47 PM #3 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: ATAPI DVD RW 8XMax, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
10:35:47 PM #4 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:35:47 PM #5 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: F01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 43 4D 43 20 4D - 41 47 00 46 30 31 00 38 ...CMC.MAG.F01.8
23 54 37 10 02 48 71 02 - 8C 69 16 16 0B 0B 0A 0A #T7..Hq..i......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
10:35:47 PM #6 Text 0 File DVDPlusRW.cpp, Line 648
Start write address at LBA 0
DVD high compatibility mode: No
10:35:47 PM #7 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
Estimated filesystem size: 544
10:35:47 PM #8 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
10:35:48 PM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1686
Buffering files started
10:35:48 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1407
Buffering VIDEO_TS.VOB
10:35:48 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 2562
Finished buffering file VIDEO_TS.VOB of size 83968 bytes (41 sectors)
10:35:48 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VIDEO_TS.VOB of size 83968 bytes (41 sectors)
10:35:48 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2642
Buffering files finished successfully
10:36:05 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 0. Length: 640
10:36:05 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 1869
Reserved start fragment at 0
10:36:06 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 640. Length: 32
10:36:06 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_1.VOB at sector 672
11:43:04 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors)
11:43:04 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_2.VOB
11:43:04 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_2.VOB at sector 524959
12:02:15 AM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_2.VOB of size 407214080 bytes (198835 sectors)
12:02:15 AM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_0.BUP at sector 723794
12:02:15 AM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_0.BUP of size 32768 bytes (16 sectors)
12:02:18 AM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_0.IFO at sector 640
12:02:19 AM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2609
Successfully released fragment at 640
12:02:19 AM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_0.IFO of size 32768 bytes (16 sectors)
12:02:21 AM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 650
Successfully released fragment at 672
12:02:21 AM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 723840. Length: 32
12:02:21 AM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_02_1.VOB at sector 723872
1:10:19 AM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_02_1.VOB of size 1073739776 bytes (524287 sectors)
1:10:19 AM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_02_2.VOB
1:10:19 AM #32 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_02_2.VOB at sector 1248159
1:28:46 AM #33 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_02_2.VOB of size 392849408 bytes (191821 sectors)
1:28:46 AM #34 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_02_0.BUP at sector 1439980
1:28:46 AM #35 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_02_0.BUP of size 32768 bytes (16 sectors)
1:28:50 AM #36 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_02_0.IFO at sector 723840
1:28:51 AM #37 Text 0 File BurnAtOnceRecorder.cpp, Line 2609
Successfully released fragment at 723840
1:28:51 AM #38 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_02_0.IFO of size 32768 bytes (16 sectors)
1:28:51 AM #39 Text 0 File BurnAtOnceRecorder.cpp, Line 1407
Buffering VIDEO_TS.IFO
1:28:51 AM #40 Text 0 File BurnAtOnceRecorder.cpp, Line 2571
Finished buffering file VIDEO_TS.IFO of size 12288 bytes (6 sectors)
1:28:51 AM #41 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VIDEO_TS.IFO of size 12288 bytes (6 sectors)
1:28:51 AM #42 Text 0 File BurnAtOnceRecorder.cpp, Line 1407
Buffering VIDEO_TS.BUP
1:28:51 AM #43 Text 0 File BurnAtOnceRecorder.cpp, Line 2571
Finished buffering file VIDEO_TS.BUP of size 12288 bytes (6 sectors)
1:28:51 AM #44 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VIDEO_TS.BUP of size 12288 bytes (6 sectors)
1:28:51 AM #45 Phase 175 File APIProgress.cpp, Line 276
Finalizing disc started
1:28:51 AM #46 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
1:28:51 AM #47 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
1:28:51 AM #48 Text 0 File BurnAtOnceRecorder.cpp, Line 3247
Writing filesystem of size 1114112 at sector 0
1:28:53 AM #49 Text 0 File BurnAtOnceRecorder.cpp, Line 2943
Writing VIDEO_TS.IFO at sector 544
1:28:53 AM #50 Text 0 File BurnAtOnceRecorder.cpp, Line 3171
Writing VIDEO_TS.VOB at sector 560
1:28:54 AM #51 Text 0 File BurnAtOnceRecorder.cpp, Line 2971
Writing VIDEO_TS.BUP at sector 608
1:29:31 AM #52 Phase 177 File APIProgress.cpp, Line 276
Disc finalized successfully
1:29:38 AM #53 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 7/4/2004 10:50:14 AM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 7/4/2004 10:50:14 AM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 6:06:00 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
|
Advertisement
|
|
|
Moderator
|
28. August 2005 @ 10:50 |
Link to this message
|
Quote:
Recorder: <ATAPI DVD RW 8XMax> Version: 150D
- is your burner one of these iomagic drives - http://www.iomagic.com/Firmware/FirmwareDownload.html - if so, which one ? as i see a choice of 2 it could be there, basically a rebadged Optorite DD0401 or DD0405
Quote:
DiskPeripheral : WDC WD800JB-00DUA3 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ATAPI DVD RW 8XMax atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
- a-ha, DMA needs to be on for the 8XMax burner, fix it via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
- that 2nd line's not good. my 'crap media detector' has just kicked in...
Here's an example of what it should look like Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202143 (489:21.68, 4301MB)
Quote:
Recorder: ATAPI DVD RW 8XMax, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
-a-ha, my crap media detector was indeed correct. This is THE most foul, most abhorrent dvd media on the market. the only good and consistent burning to be had from CMC Mags is in a wood burner, at 500C
Quote:
Burn process completed successfully at 8x (11,080 KB/s)
- try 4x, you're torturing that appalling CMC Mag media with 8x (ok it deserves torture, but hey!).
Quote:
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 7/4/2004 10:50:14 AM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 7/4/2004 10:50:14 AM
- you've got Roxio on the PC, it and Nero don't always play well. If you don't use it on the PC, uninstall Roxio, otherwise keep it on mind..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 28. August 2005 @ 10:52
|
|
