|
|
|
Nero Write-Error
|
|
Member
|
28. August 2005 @ 19:55 |
Link to this message
|
Quote:
1A20-****-****-****-****-****
Edit out your Serial Number
Quote:
Nero version: 6.3.1.4 (Nero Express)
Your version is somewhat out of date, current one is 6.6.0.16. You can get it at aD 9http://www.afterdawn.com/software/cdr_software/cdr_applications/n...) or directly from Nero @ http://www.nero.com/us/nero-up.php
Quote:
Burn process failed at 52x (7,800 KB/s)
I would slow this down, your computer may not be able to keep up
From he looks of it you are using files already in VCD format.
Quote:
Physical memory : 1023MB (1048096kB)
Free physical memory: 661MB (677004kB)
Memory in use : 35 %
Looks like you have tons to play with, shouldn't be a problem
Quote:
Status: 0x04 (0x01, SCSI_ERR)
Not sure, but it doesn't sound good. Creaky should know :P
Scott
This message has been edited since posting. Last time this message was edited on 28. August 2005 @ 20:00
|
|
Advertisement
|
 |
|
|
|
Bigfatboy
Member
|
28. August 2005 @ 20:34 |
Link to this message
|
|
|
Moderator
|
30. August 2005 @ 02:16 |
Link to this message
|
let's have that latest section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
hopefully the other guys' suggestions will show up in that new log and we can go from there..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
SorFeS2
Newbie
|
1. September 2005 @ 03:43 |
Link to this message
|
Hi All,
I've been having a similar problem. I haven't burnt anything to cd for a few months but I've been trying to backup some files over the past couple of days without success. Nero did work fine with my dvd writer before.
First I got a power calibration error / power consumption error. I updated the drivers for my dvd player/writer. Then I started getting the write-error. I've tried various combinations of the tick boxes, including different write speeds but still not working. I have not updated by Nero files but it still isn't working. I haven't had any problems using these cds before - burnt onto some others previously from the same batch and have tried a number of the blank cds from this batch but no luck.
Would there be the possibility that my dvd player/writer isn't working properly? It will read ok from CD and dvd though I was noticing some problems with reading dvds... it just to start it up quickly but now it has to think about it and I do have one dvd that it wont play anymore (it works ok in the dvd player connected to the tv so it isn't the dvd)
Sorry for the long post. Will post my Nero log below. Maybe it will make more sense to some of you?
Many thanks
Victoria
>> From the last failed burn
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 20:01:02
ahead WinASPI: File 'C:\Program Files\Nero_Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <d346prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD+-RW DW-D56A E: CDRom0
Generic DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047784kB)
Free physical memory: 496MB (508508kB)
Memory in use : 51
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.9.2005
CD-ROM (ISO)
12:30:15 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:30:15 #2 Text 0 File Burncd.cpp, Line 2948
SONY DVD+-RW DW-D56A
Power-Burn activated
12:30:15 #3 Text 0 File Reader.cpp, Line 127
Reader running
12:30:15 #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD+-RW DW-D56A running
12:30:15 #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:30:15 #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media
12:30:16 #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 199915 ( 44:27.40)
12:30:16 #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
12:30:16 #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD+-RW DW-D56A;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
12:30:16 #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:30:16 #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 199916 (199916) = #199916/44:25.41
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 199914 blocks [SONY DVD+-RW DW-D56A]
--------------------------------------------------------------
12:30:16 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD+-RW DW-D56A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 409735168, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
199916 | lead-out | 1 | 0x41 | 0x00
12:30:16 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 199916 -> 199914.
12:30:16 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:30:58 #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
12:30:58 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:30:58 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 20x (3,000 KB/s)
12:30:58 #18 SCSI -1189 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03B35600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02
12:30:58 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:30:58 #20 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Power-Burn -> ON
12:31:42 #21 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x041D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x47 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
12:31:42 #22 CDR -1135 File Writer.cpp, Line 311
Write error
12:31:42 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:31:42 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:31:45 #25 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
SONY DVD+-RW DW-D56A\H1 T0
12:31:45 #26 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
12:31:45 #27 Text 0 File Mmc.cpp, Line 16352
<SONY DVD+-RW DW-D56A > start Close Session
12:31:58 #28 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x00
12:31:58 #29 CDR -1176 File WriterStatus.cpp, Line 249
Session fixation error
12:31:58 #30 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
12:31:58 #31 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
12:31:58 #32 Text 0 File Mmc.cpp, Line 16352
<SONY DVD+-RW DW-D56A > start Close Session
12:31:59 #33 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 20x (3,000 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11:53:28 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11:53:04 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11:53:30 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for rec)
File 'Drivers\d346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 12/03/2004 23:41:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
1. September 2005 @ 03:51 |
Link to this message
|
@SorFeS2 -
Quote:
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 20:01:02
- those question marks aren't right. Download and install ASPI 4.71 from here - http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm
Quote:
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7
- firmware is up to date, so that's ok
Quote:
Recorder: SONY DVD+-RW DW-D56A;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
- if fixing ASPI layer and removing InCD doesn't improve things, try better media
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Write error
Invalid write state
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Session fixation error
Could not perform Fixation
Burn process failed at 20x (3,000 KB/s)
- see previous comment
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11:53:28 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11:53:04 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11:53:30 (InCD4 driver for win NT/2K/XP)
- this is Nero's 'packet writing' software. uninstall Nero, uninstall completely via Nero's Clean Tools - ' http://www.nero.com/en/Clean_Tools.html ', reinstall Nero WITHOUT installing InCD.
As i said above, if fixing ASPI layer and removing InCD doesn't improve things, try better media
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 12. September 2005 @ 04:26
|
|
SorFeS2
Newbie
|
1. September 2005 @ 04:10 |
Link to this message
|
|
Thanks Creaky.
I meant to say in the previous post sorry for hijacking the thread.
Will try the stuff you've said. Fingers crossed!
What do you mean by 'better media'?
Many thanks.
V.
|
|
SorFeS2
Newbie
|
1. September 2005 @ 04:21 |
Link to this message
|
|
OK, being abit thick ...
Have downloaded the aspi from the site you gave Creaky.
When I click on the aspiinst.exe it says
Adaptec's ASPI installer will update the ASPI layer for Windows 98, Windows ME, Windows NT or Windows 2000.
Er... I'm running windows xp.
V.
|
Moderator
|
1. September 2005 @ 05:13 |
Link to this message
|
|
@SorFeS2 -
that's ok, the ASPI download is for XP also....
as i say, if fixing the things i pointed out don't fix your problems, buy better quality cd's as we've tweaked all your settings once you've applied those suggestions, thus all that's left is that your burner doesn't like those discs (if you still have problems after tweaks applied)...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
SorFeS2
Newbie
|
1. September 2005 @ 05:28 |
Link to this message
|
Thanks Creaky.
Have tried the apsi and getting rid of InCD but no luck.
Will probably have to wait til the weekend to remove and reinstall Nero.
Thanks again for the help.
V.
|
Moderator
|
1. September 2005 @ 05:33 |
Link to this message
|
|
no worries, keep me/us posted..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
SorFeS2
Newbie
|
2. September 2005 @ 02:44 |
Link to this message
|
Hi all,
Just a brief update since yesterday!
Haven't reinstalled Nero yet but have tried a number of different bradns of cd. The ones I had been trying are verbatim. I'm still having no luck with them. I have also now tried an 'imation' but that won't burn either. Finally I've tried my old liteon RW (max write speed 12x) and although the first time I tried it it said burn completed successful, there didn't seem to be anything on the cd when I looked! Nero has let me erase the stuff that was on it from ages ago - so now there is nothing on it. (was burning at 10x in this case)
So, can erase but still can't burn.
Oh, the error varies between 'write error' and 'power calibration error'.
|
Moderator
|
2. September 2005 @ 03:00 |
Link to this message
|
@SorFeS2 -
Quote:
Power calibration error
- quote from "Nero.com/en/FAQs_Error_Messages.html#9" class="korostus" target="_blank">http://www.Nero.com/en/FAQs_Error_Messages.html#9 - "
Quote:
"9. I get a 'Power calibration error' or 'Calibration area (almost) full' error message. Why?
Power Calibration is controlled by the recorder.
Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). During the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC).
This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times.
If you receive the "Power calibration error" or "Power calibration area is (amost) full" error message, the cause will be either poor media, poor power, or a defective recorder.
Please try the following solutions:
Update the firmware of your recorder. Please check the manufacturer's website for the latest version.
Try another brand of CD-R or CD-RW media.
Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal.
Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
Send the recorder in for service."
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
SorFeS2
Newbie
|
2. September 2005 @ 03:17 |
Link to this message
|
Yip, I've seen that FAQ.
Since I've now done the first two points on the what to do for that, it doesn't look good for my recorder! I'm working on a laptop.... *sigh* Still, I think its still under warrantry from Dell.
Will try reinstalling Nero just in case. If that doesn't work then I guess I contact Dell.
Thanks for the help though.
|
Moderator
|
2. September 2005 @ 03:20 |
Link to this message
|
|
no worries, that's what we're here for, to try and get you working without costing anything, if all else fails it's down to swapping components or other such drastic stuff
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
SorFeS2
Newbie
|
9. September 2005 @ 05:15 |
Link to this message
|
|
Thought I'd give an update, though it's not particularly helpful. I've finally decided my cd/dvd burner bit (hardware) is broken so tried ringing DELL - my laptop is not quite a year old. Couldn't get through, so I emailed them. They sent back a list of things to try like make sure you've put the cd in properly and that it has clicked in.... *grin*
Anyway, emailed back that I had already tried all their possible solutions, just to get an automated email as follows:
>>>
We have received your request for information on your Dell system.
Please note our e-mail queues are open between 8:00 am to 8:00 pm UK time.
We will respond to your communication as soon as possible and will
endeavour to reply within the next 48 hours.
In case of a delay in response we apologise as currently we are
experiencing technical difficulties due to high mail inflow.
Thank you for your co-operation.
>>>
Seemingly something has gone wrong with DELL computers in the UK, they not as good as they were (this from a computer support guy who has bought in a few hundred Dells for the office and has been having to call the dell engineer out just about everyday!). Anyway, have not as yet had any reply. Guess I will wait till next week and then try emailing again and hopefully they will just send out a new burner.
Thanks again for all the help.
|
|
Advertisement
|
|
|
Moderator
|
9. September 2005 @ 10:10 |
Link to this message
|
|
no worries, thanks for the update.. hope it works out
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
