|
|
|
External Burning and Nero
|
|
|
denret
Suspended due to non-functional email address
|
5. September 2005 @ 06:31 |
Link to this message
|
|
Been experiencing some of the same problems as you'all..burning errors. I'm attempting to use Nero OEM 6.6.0.15. Using a Coolmax CD 510-u2 external enclosure and a NEC 3520a drive.
After much trial and error, I'm convinced it's Nero. I contacted Nero technical support and they came back with the same old song about removing all other burning software, updating all of my drivers, flashing the ROM on the burner, blah, blah, blah.
Desperate, I dragged an old copy of NEO out of my archives. I can burn flawlessly all of the time with NEO DVD on the same hardware configuration.
Personally, I think Nero is a huge disappointment, not only for this issue, but for others I've previously tried to get resolutions to.
|
|
Advertisement
|
|
|
|
Moderator
|
5. September 2005 @ 13:27 |
Link to this message
|
|
will happily have a go at getting your Nero up and running - post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar.
am gonna no doubt recommend some of the things as Nero support, but that's because the logfiles are extremely good at giving a picture of your setup. Once we fix any settings that potentially need tweaking, we should have you up and burning.
Have requested thread be teleported to Nero forum also.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 5. September 2005 @ 13:30
|
Moderator
|
5. September 2005 @ 13:52 |
Link to this message
|
|
Teleported :)
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33 |
Moderator
|
5. September 2005 @ 13:57 |
Link to this message
|
@Nephilim - why thank you kind sir.
@denret - just reread your post. the word enclosure stands out to me. There's a few long-running threads on afterdawn re enclosures and Nero, so one thing i'd like to possibly try at some point is get you to mount the drive internally and do some 'simulation' burns (thus not wasting any discs)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
denret
Suspended due to non-functional email address
|
5. September 2005 @ 15:50 |
Link to this message
|
Thanks for the feedback...sorry, but I can't find a way to attach the log file to this reply. I'm not sure it will be of any use anyway. The error message from Nero the last couple attempts has been "unidentified atapi error" and then the machine locks up and requires reboot. Thus, I'm not sure anything usable is being generated.
FYI....since my last post, I downloaded a trial copy of Deepburner Pro.
Burns like a champ...no errors or coasters, as well as does NEO.
In response to a late post, yes I am attempting in an External configuration, and yes this DVD drive did work perfectly internally before moving to the External application.
My references to NEO and Deepburner are in the External burning mode.
They work flawlessly with precisely the same hardware setup. Nero does not...
I'm almost to the conclusion that if it quacks like a duck and it walks like a duck....
Ill forward the log file if you'll kindly send some detailed instructions.
Thanks again
|
Moderator
|
5. September 2005 @ 23:29 |
Link to this message
|
i pasted info on the location of Nero log further up the thread..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
denret
Suspended due to non-functional email address
|
6. September 2005 @ 05:24 |
Link to this message
|
Attached are the last two dumps from the Nero log file:
..===== *** Nero-Burning Rom, History File *** ======
Personal
Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/04 6:35:34 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD+RW DRU-120A>Version: 1.31 - HA 0 TA 1 - 6.6.0.15
Adapter driver: <ESDI_506> HA 0
PHILIPS PCRW804 (Target 0, E:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
SONY DVD+RW DRU-120A (Target 1, F:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
_NEC DVD_RW ND-3520A (Target 0, G:): Autoinsert On, DMA ?, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261588kB)
Free physical memory: 49MB (50444kB)
Memory in use : 63
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.8.2005
UDF/ISO compilation
9:08:32 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
9:08:32 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
9:08:32 AM #3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
9:08:32 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
9:08:32 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
9:08:32 AM #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3520A running
9:08:33 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:08:33 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:08:33 AM #9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
9:08:33 AM #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
9:08:33 AM #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
9:08:33 AM #12 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: _NEC DVD_RW ND-3520A, Media type: DVD+R
9:08:33 AM #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:08:33 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-3520A]
--------------------------------------------------------------
9:08:33 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-3520A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
9:08:33 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
9:08:33 AM #17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
9:08:33 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
9:08:33 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
9:08:33 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:08:33 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05707A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
9:08:33 AM #22 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x057F0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
9:08:33 AM #23 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x057F0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
9:08:33 AM #24 Text 0 File DVDPlusRW.cpp, Line 663
Start write address at LBA 0
DVD high compatibility mode: Yes
9:08:49 AM #25 SCSI -1 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02C60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
9:08:49 AM #26 CDR -1 File Writer.cpp, Line 311
Unspecified Recorder Error
_NEC DVD_RW ND-3520A\H1 T0
9:08:49 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:08:50 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:09:04 AM #29 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
9:09:57 AM #30 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x057F0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
9:09:57 AM #31 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x057F0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
9:09:57 AM #32 CDR -1093 File WriterStatus.cpp, Line 167
No seek complete
_NEC DVD_RW ND-3520A\H1 T0
9:09:57 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
9:09:57 AM #34 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 3/2/01 8:55:54 PM
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1030), size=20047 bytes, created 3/2/01 8:55:54 PM
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 8/9/04 3:51:46 PM
File 'IoSubsys\CDUDF.VXD': Ver=3.01 (165), size=62845 bytes, created 8/9/04 3:54:32 PM
File 'IoSubsys\CDUDFRW.VXD': Ver=3.01 (164), size=151295 bytes, created 8/9/04 3:54:32 PM
File 'IoSubsys\CDRPWD.VXD': Ver=3.01 (162), size=44551 bytes, created 1/18/00 3:01:00 AM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2222, size=9360 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2222, size=9825 bytes, created 4/23/99 10:22:00 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\CDRBSVSD.VXD': Ver=1.1.3, size=9851 bytes, created 2/2/02 1:13:02 AM
Registry Keys:
====== *** Nero-Burning Rom, History File *** ======
Personal
Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/04 6:35:34 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD+RW DRU-120A>Version: 1.31 - HA 0 TA 1 - 6.6.0.15
Adapter driver: <ESDI_506> HA 0
PHILIPS PCRW804 (Target 0, E:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
SONY DVD+RW DRU-120A (Target 1, F:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
_NEC DVD_RW ND-3520A (Target 0, G:): Autoinsert On, DMA ?, Disconnect On, SyncDataXfer On
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261588kB)
Free physical memory: 3MB (3992kB)
Memory in use : 80
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.8.2005
UDF/ISO compilation
6:07:21 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
6:07:21 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
6:07:21 PM #3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:07:21 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
6:07:21 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
6:07:21 PM #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3520A running
6:07:21 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:07:21 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:07:21 PM #9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
6:07:22 PM #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
6:07:22 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
6:07:22 PM #12 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: _NEC DVD_RW ND-3520A, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 0
6:07:22 PM #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:07:22 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-3520A]
--------------------------------------------------------------
6:07:22 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-3520A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
6:07:22 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
6:07:22 PM #17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
6:07:22 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
6:07:22 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
6:07:22 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:07:22 PM #21 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: INFODISC
Media type ID: A01
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 49 4E 46 4F 44 - 49 53 43 41 30 31 02 39 ...INFODISCA01.9
23 00 8E 7A 56 02 1A 00 - 90 83 64 02 1E 00 86 7E #..zV.....d....~
5E 02 1E 04 04 10 F0 00 - 00 00 00 00 00 00 00 00 ^...............
6:07:23 PM #22 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x057F0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
6:07:23 PM #23 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x057F0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
6:07:23 PM #24 Text 0 File DVDPlusRW.cpp, Line 663
Start write address at LBA 0
DVD high compatibility mode: Yes
6:07:38 PM #25 SCSI -1 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02C60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
6:07:38 PM #26 CDR -1 File Writer.cpp, Line 311
Unspecified Recorder Error
_NEC DVD_RW ND-3520A\H1 T0
6:07:39 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:07:39 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:07:54 PM #29 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x057F0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
6:07:54 PM #30 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x057F0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
6:07:54 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 3/2/01 8:55:54 PM
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1030), size=20047 bytes, created 3/2/01 8:55:54 PM
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 8/9/04 3:51:46 PM
File 'IoSubsys\CDUDF.VXD': Ver=3.01 (165), size=62845 bytes, created 8/9/04 3:54:32 PM
File 'IoSubsys\CDUDFRW.VXD': Ver=3.01 (164), size=151295 bytes, created 8/9/04 3:54:32 PM
File 'IoSubsys\CDRPWD.VXD': Ver=3.01 (162), size=44551 bytes, created 1/18/00 3:01:00 AM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2222, size=9360 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2222, size=9825 bytes, created 4/23/99 10:22:00 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\CDRBSVSD.VXD': Ver=1.1.3, size=9851 bytes, created 2/2/02 1:13:02 AM
Registry Keys:
====== *** Nero-Burning Rom, History File *** ======
|
Moderator
|
6. September 2005 @ 06:04 |
Link to this message
|
bear with me, i've not as good at reading the Win98's 'Existing drivers' section at the end of the log as well as WinXP....
Quote:
Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04
- you firmware's out of date, 3.05 is here - http://forum.rpc1.org/dl_firmware.php?download_id=2005
Quote:
Physical memory : 255MB (261588kB)
Free physical memory: 3MB (3992kB)
Memory in use : 80
- OMG! 3MB free, that's a record for me. First of all 255MB is not the most ideal amount for DVD work (even under Windows 98, though i'll admit the oldest OS i used for dvd work was Win2000). Either way, something's used up ALL your memory which is bad news anyway, and bad news for any dvd burning
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
- you're burning too close to the edge of the disc(s). If you use DVD Shrink, set target size in Shrinl's preferences to 4300MB, thus avoiding outer edge of discs and not sacrificing much space
Quote:
Recorder: _NEC DVD_RW ND-3520A, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 0
- not sure if INFODISC is of too good a quality , but it's a rewritable so hopefully cranking back the target size should be sufficient
Quote:
Sense Key: 0x00 (KEY_NO_SENSE)
- sorry, had to quote that purely for comedy value, that's a great error!
Quote:
Unspecified Recorder Error
Burn process failed at 2.4x (3,324 KB/s)
- as i say, no free memory, the firmware's out of date and the target size needs adjusting.
Quote:
Existing drivers:
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 3/2/01 8:55:54 PM
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1030), size=20047 bytes, created 3/2/01 8:55:54 PM
- those 2 look suspiciously like Roxio (or Easy CD Creator as it used to be known) - Roxio and Nero don't play well, try uninstalling Roxio and fully removing it via Roxio Zapper (which you just need to google search for)
Some/all of these things have probably been suggested/advised by Nero support, but i've simply gone thru the log and highlighted the problems within. I'm certainly not gonna bend your arm towards any burning software, however until all the problems are addressed Nero won't work properly for you. I can't comment on the other 2 softwares you mention as haven't used those myself..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
6. September 2005 @ 06:16 |
Link to this message
|
|
I use the same version of Nero with TWO burners in external enclosures on my laptop via USB... That leads me to believe that it is definitely not Nero... I uninstalled all the Roxio/Sonic crap as directed prior to adding my burners and they were plug and play when I did...
Dropbox: http://db.tt/p5P9bH1d
System 1: Core2Quad Q6600 O/Ced @ 3.15 GHz, Gigabyte GA EP35 DS4 mobo, Zalman 9700, 4GB PC6400 RAM, Sapphire Radeon 2600HD Pro, Samsung 920BW 19" Widescreen LCD, Hauppauge! PVR-350.
System 2: Core2Duo E6400 O/Ced @ 3.2 GHz, Gigabyte GA 965P S3 mobo, Arctic Cooling Freezer 7 Pro, 2GB PC6400 RAM, PNY GeForce 6600, Hyundai B70A 17" LCD.This message has been edited since posting. Last time this message was edited on 6. September 2005 @ 06:18
|
AfterDawn Addict
|
6. September 2005 @ 06:35 |
Link to this message
|
|
|
denret
Suspended due to non-functional email address
|
7. September 2005 @ 04:52 |
Link to this message
|
Thanks for your effort and feedback. I will attempt to implement some or all of your observations. However, I'm beginning to think Nero is over-engineered...everthing in your computer has to be Nero's way or else.
The other two burner applications I referred to were "NEO DVD", a burner program available from "Mediostream". It's been around awhile and works well in most applications. The other one, "Deepburner" is something I saw on this forum and just decide to try for purposes of testing my hardware setup. Both of these programs burn any kind of DVD flawlessly with all of the same hardware...no tweaking.
It could be that Nero just doesn't like Windows 98se. If so, they should state that fact. As stated earlier, given all of the hype thats thown Neros' way, I'm very much disappointed.
Thanks again
|
|
Advertisement
|
|
|
Moderator
|
7. September 2005 @ 05:08 |
Link to this message
|
I myself have been using Nero for donkeys years, across win98, w2k and xp. I have never had an issue with Nero. Before that I used easy cd creator without issue thru various versions, until 5.0 when I had loads of bugs, then I moved to Nero and never looked back. But that's just my own experience.
Whether you or I like Nero or not/ whether its over-engineered or not, doesn't matter at this point, as the logfile shows you have fundamental issues on your machine, such as old firmware for instance. That's separate to burning prog, as firmware is what allows your burner to deal with media/newer media, and burn speeds. Until you correct the things I've poined out, you will have problems. It just happens that the other programs are working for you at the moment. As I said before, I'm not here to persuade you to choose one prog over another, but if you try and use Nero with these incorrect or out of date settings, those settings are still out of date or incorrect. If you don't want to do these basic things like get your stuff up to date then all I can suggest is you stick to the other programs until they in turn let you down at some point due to those self-same things in the logfiles...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
