|
|
|
How to burn files to dvd and leave the session open ?
|
|
|
marcos90
Newbie
|
6. September 2005 @ 20:13 |
Link to this message
|
|
Hi,
I'd like to run a test and burn DVD-R with session left open, in order to see whether my standalone divx player Philips 642, will be able to read the divx avi files from such DVD.
I know for sure 642 was able to read files from open sessioned CD's, which was very convenient for me, just adding the files to CD-R's as I wanted.
Now I'd like to repeat the same with my new DVD burner, LG4163b.
However, Nero 6 does not provide an option to 'leave session open', nor there is a option to burn DVD 'track at once' (it is greyed), which should imho result in dvd left with opened session.
I tried multisession dvd burns, but such burns as expected result in only the first session visible on standalone 642. Therefore hoping for more luck with open sessons.
If anyone knows on Nero 6 option to do it, or any other dvd burning sw, please comment...
Thanks,
|
|
Advertisement
|
|
|
|
Moderator
|
7. September 2005 @ 03:43 |
Link to this message
|
|
you'll find that your problem is due to not all players bing able to properly read discs that aren't finalised or 'closed'
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
marcos90
Newbie
|
7. September 2005 @ 11:28 |
Link to this message
|
Yes, but I would like to know , why , Nero doesnt accept Track at once write method only for DVD-R and DVD+R ??
|
Moderator
|
7. September 2005 @ 11:31 |
Link to this message
|
pls post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
marcos90
Newbie
|
7. September 2005 @ 14:11 |
Link to this message
|
I checked the filelog history , but unfortunatly , last night i was recording some audio cd-rs , and it looks like the data from past
dvd-rs logs are gonne away ... And i wouldnt like to burn another DVD-R multisession dvd , because I already spend away 6 dvd-rs without sucess to read multiple sessions on 642k player phillips or another old Pc dvd players .
By the way , heres the pic of what going on :
This message has been edited since posting. Last time this message was edited on 7. September 2005 @ 14:12
|
Moderator
|
7. September 2005 @ 15:22 |
Link to this message
|
|
Can't see the pic as I'm replying via my handheld so will look at in the morning as I'm retiring for the night. Anyway, what I was gonna say is you can do 'simulation burns' which go thru the motions with a ank disc and don't write to the discs, and appends to the logfile..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
marcos90
Newbie
|
7. September 2005 @ 16:05 |
Link to this message
|
Thanks for the tip man .. I didnt knew about simulation . Well I did and I guess this is what was appeared when I started a multisession DVD-R :
7.9.2005
ISO compilation
20:56:49 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:56:50 #2 Text 0 File Reader.cpp, Line 127
Reader running
20:56:50 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
20:56:50 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
20:56:50 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
20:56:50 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 85999 ( 19:06.49, 167MB)
20:56:50 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
20:56:51 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
20:56:51 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:56:51 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 86000 (86000) = #86000/19:6.50
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 86000 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
20:56:54 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 176128000, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
86000 | lead-out | 1 | 0x41 | 0x00
20:56:55 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
20:56:55 #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
20:56:55 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
20:56:55 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11,080 KB/s)
20:56:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:56:55 #17 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode for Multisession
20:56:55 #18 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
20:56:55 #19 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
20:56:55 #20 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:56:55 #21 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type
20:57:34 #22 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 86000 (14FF0h), lenght 0 blocks
20:57:34 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:57:34 #24 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 85999
20:57:36 #25 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
20:57:38 #26 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD+R
Book Type setting not supported for the loaded disc type
20:57:38 #27 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 22:59:44 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
|
Moderator
|
7. September 2005 @ 22:33 |
Link to this message
|
you're missing the first part of that section of logfile; newer firmware is here but need the first bit of logfile to verify exactly which firmware you need (if at all) - http://forum.rpc1.org/dl_firmware.php?download_id=1973
And there's a few other vital bits of info in that missing section of log..
Quote:
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD+R
Book Type setting not supported for the loaded disc type
Nero's trying to book type -R discs, you can't booktype -R. My Nero is set to 'auto' for booktyping and it only booktypes +R, and doesn't try to do -R
Quote:
Simulation completed successfully at 8x (11,080 KB/s)
most people recommend 4x for movies
Quote:
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 22:59:44 (Adapter driver for rec)
- atapi drivers aren't loaded correctly, try this - http://home.comcast.net/~bbmayo/FAQ.htm
ps that screenshot appears to me to suggest you've put a blank disc in AFTER presing burn so the drive can't detect speed info from the disc - Nero then picks max speed
...unless of course you just did that screenshot without a disc in, to illustrate what you were saying...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
marcos90
Newbie
|
8. September 2005 @ 06:55 |
Link to this message
|
you're missing the first part of that section of logfile; newer firmware is here but need the first bit of logfile to verify exactly which firmware you need (if at all) - http://forum.rpc1.org/dl_firmware.php?download_id=1973
1- My firmware version is A-104 . And i think I still dont need to update to A-105 since I dont have any problem with recognition with most of the types medias dvd-rs
And there's a few other vital bits of info in that missing section of log..
Quote:
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD+R
Book Type setting not supported for the loaded disc type
Nero's trying to book type -R discs, you can't booktype -R. My Nero is set to 'auto' for booktyping and it only booktypes +R, and doesn't try to do -R
2- Humm...I guess , here is the point ...To tell the truth , I didn't used any DVD+R for multisession yet ... I only had used DVD-R if I remember correctly . Because , DVD+R is little hard to find here .But , I will gonna buy some couple of these to do the multisession disk .
Quote:
Simulation completed successfully at 8x (11,080 KB/s)
most people recommend 4x for movies
3- I did 8X because it was a test . I allways use 4x to burn dvds , because of my limitation of the PC . It is an older Celeron 1.1Ghz ,320RAM .
Quote:
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 22:59:44 (Adapter driver for rec)
- atapi drivers aren't loaded correctly, try this - http://home.comcast.net/~bbmayo/FAQ.htm
4- ok , i will gonna try that one too .
ps that screenshot appears to me to suggest you've put a blank disc in AFTER presing burn so the drive can't detect speed info from the disc - Nero then picks max speed
...unless of course you just did that screenshot without a disc in, to illustrate what you were saying...
5- Yes, you right , i was just trying to ilustrate that "problem" with write method box is "gray" .
6- Thanks again for your attention ,patient and the tips . I even didnt knew it about the differences betwen DVD+R and DVD-R types .As I said before , I will gonna buy some couples of DVD+R , and lets see , what wil gonna happens .
|
Moderator
|
8. September 2005 @ 09:26 |
Link to this message
|
no worries, glad to help.
ok, keep A105 firmware in mind cus at some point you'll buy different media and that's where the firmware comes in....and post that missing bit of logfile.
in the meantime...the line that separates the sections of logfile is like this Quote:
====== *** Nero-Burning Rom, History File *** ======
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
marcos90
Newbie
|
8. September 2005 @ 09:34 |
Link to this message
|
I got it . Like this ? :
====== *** Nero-Burning Rom, History File *** ======
user
user
xxxx-xxxx-xxxx-xxxx-xxxx-xxxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 17:35:34
Nero Version: 6.6.0.8
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI DVD-ROM GD-8000 >Version: 0008 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HITACHI DVD-ROM GD-8000 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
HL-DT-ST CD-RW GCE-8520B E: CDRom1
HITACHI DVD-ROM GD-8000 I: CDRom2
Generic DVD-ROM K: CDRom3
Generic DVD-ROM L: CDRom4
AXV CD/DVD-ROM H: CDRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 88MB (90660kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.9.2005
ISO compilation
20:56:49 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:56:50 #2 Text 0 File Reader.cpp, Line 127
Reader running
20:56:50 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
20:56:50 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
20:56:50 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
20:56:50 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 85999 ( 19:06.49, 167MB)
20:56:50 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
20:56:51 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
20:56:51 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:56:51 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 86000 (86000) = #86000/19:6.50
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 86000 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
20:56:54 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 176128000, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
86000 | lead-out | 1 | 0x41 | 0x00
20:56:55 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
20:56:55 #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
20:56:55 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
20:56:55 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11,080 KB/s)
20:56:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:56:55 #17 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode for Multisession
20:56:55 #18 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
20:56:55 #19 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
20:56:55 #20 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:56:55 #21 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type
20:57:34 #22 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 86000 (14FF0h), lenght 0 blocks
20:57:34 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:57:34 #24 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 85999
20:57:36 #25 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
20:57:38 #26 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD+R
Book Type setting not supported for the loaded disc type
20:57:38 #27 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
marcos90
Newbie
|
8. September 2005 @ 18:32 |
Link to this message
|
I bought some DVD+R medias and burned just one multisession disk . The result was the same :- ( . Only the first session it can be readed in the 642k or other more little older dvd player . When played in the driver recorder 4163b , it shows all sessions . I made 3 sessions ,first two I lefted open to test on 642k and pc dvd player .And the last session I closed the session and the disk .
Here are the log files of these 3 sessions :
Session 1 :
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 17:35:34
Nero Version: 6.6.0.8
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI DVD-ROM GD-8000 >Version: 0008 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HITACHI DVD-ROM GD-8000 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
HL-DT-ST CD-RW GCE-8520B E: CDRom1
HITACHI DVD-ROM GD-8000 I: CDRom2
Generic DVD-ROM K: CDRom3
Generic DVD-ROM L: CDRom4
AXV CD/DVD-ROM H: CDRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 130MB (134068kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.9.2005
ISO compilation
22:35:41 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:35:41 #2 Text 0 File Reader.cpp, Line 127
Reader running
22:35:41 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
22:35:41 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
22:35:41 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
22:35:41 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1948303 (432:57.28, 3805MB)
22:35:41 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
22:35:41 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
22:35:41 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:35:41 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1948304 (1948304) = #1948304/432:57.29
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1948304 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
22:35:56 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3990126592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1948304 | lead-out | 1 | 0x41 | 0x00
22:35:56 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
22:35:57 #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
22:35:57 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
22:35:57 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
22:35:57 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:35:57 #17 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
22:35:57 #18 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
22:35:57 #19 CDR -1211 File DVDR.cpp, Line 4763
Book Type set to: DVD-ROM
22:35:57 #20 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 0
DVD high compatibility mode: No
22:48:13 #21 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1948304 (1DBA90h), lenght 0 blocks
22:48:13 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
22:48:33 #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
marcos90
Newbie
|
8. September 2005 @ 18:33 |
Link to this message
|
Session 2 :
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 17:35:34
Nero Version: 6.6.0.8
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI DVD-ROM GD-8000 >Version: 0008 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HITACHI DVD-ROM GD-8000 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
HL-DT-ST CD-RW GCE-8520B E: CDRom1
HITACHI DVD-ROM GD-8000 I: CDRom2
Generic DVD-ROM K: CDRom3
Generic DVD-ROM L: CDRom4
AXV CD/DVD-ROM H: CDRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 130MB (133892kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.9.2005
ISO compilation
22:55:51 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:55:51 #2 Text 0 File Reader.cpp, Line 127
Reader running
22:55:51 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
22:55:51 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
22:55:51 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
22:55:53 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2000175 (444:29.00, 3906MB)
22:55:53 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
22:55:53 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
22:55:53 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:55:53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 49824 (49824) = #49824/11:4.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 49824 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
22:55:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 102039552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
1950352 | lead-in | 0 | 0x41 | 0x00
1950352 | 2 | 0 | 0x41 | 0x00
1950352 | 2 | 1 | 0x41 | 0x00
2000176 | lead-out | 1 | 0x41 | 0x00
22:55:54 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
22:55:54 #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
22:55:54 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
22:55:54 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
22:55:54 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #1950352
22:55:54 #17 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
22:55:54 #18 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
22:55:54 #19 CDR -1211 File DVDR.cpp, Line 4763
Book Type set to: DVD-ROM
22:55:54 #20 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 1950352
DVD high compatibility mode: No
22:56:27 #21 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2000176 (1E8530h), lenght 0 blocks
22:56:27 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
22:56:37 #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
marcos90
Newbie
|
8. September 2005 @ 18:34 |
Link to this message
|
Session 3:
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 17:35:34
Nero Version: 6.6.0.8
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI DVD-ROM GD-8000 >Version: 0008 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HITACHI DVD-ROM GD-8000 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
HL-DT-ST CD-RW GCE-8520B E: CDRom1
HITACHI DVD-ROM GD-8000 I: CDRom2
Generic DVD-ROM K: CDRom3
Generic DVD-ROM L: CDRom4
AXV CD/DVD-ROM H: CDRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 141MB (145340kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.9.2005
ISO compilation
23:04:01 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
23:04:01 #2 Text 0 File Reader.cpp, Line 127
Reader running
23:04:01 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
23:04:01 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
23:04:01 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
23:04:04 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2182175 (484:55.50, 4262MB)
23:04:04 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
23:04:04 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
23:04:04 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
23:04:04 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 179952 (179952) = #179952/39:59.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 179952 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
23:04:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 3 to 3:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 368541696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
2002224 | lead-in | 0 | 0x41 | 0x00
2002224 | 3 | 0 | 0x41 | 0x00
2002224 | 3 | 1 | 0x41 | 0x00
2182176 | lead-out | 1 | 0x41 | 0x00
23:04:05 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
23:04:05 #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
23:04:05 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
23:04:05 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
23:04:05 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #2002224
23:04:05 #17 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
23:04:05 #18 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
23:04:05 #19 CDR -1211 File DVDR.cpp, Line 4763
Book Type set to: DVD-ROM
23:04:05 #20 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 2002224
DVD high compatibility mode: Yes
23:05:26 #21 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2182176 (214C20h), lenght 0 blocks
23:05:26 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
23:05:37 #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
Moderator
|
8. September 2005 @ 23:15 |
Link to this message
|
Quote:
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A104
for info, don't forget A105, especially now you're trying different media... - http://forum.rpc1.org/dl_firmware.php?download_id=1973
Quote:
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 22:59:44 (Adapter driver for rec)
- atapi drivers still aren't loaded correctly, did you try this - http://home.comcast.net/~bbmayo/FAQ.htm if you tried that, it couldn't have worked, so let's try it the scary way (be very careful in regedit!) - Quote:
Run REGEDIT. Go to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}
It has subkeys like 0000, 0001, 0002, etc. Normally 0001 is the primary IDE channel, 0002 the secondary, but other numbers can occur under certain circumstances. You have to go through these subkeys and check the DriverDesc value until you find the proper IDE channel.
Delete MasterIdDataChecksum or SlaveIdDataChecksum, depending on whether the device in question is attached as master or slave, but it can't actually hurt to delete both. Reboot. The drive DMA capabilities will be redetected.
Open Device Manager again and check whether the device is now actually using DMA mode. If so, congratulations, you've made it (at least until the next time Windows disables DMA).
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
marcos90
Newbie
|
9. September 2005 @ 10:16 |
Link to this message
|
- atapi drivers still aren't loaded correctly, did you try this - http://home.comcast.net/~bbmayo/FAQ.htm if you tried that, it couldn't have worked, so let's try it the scary way (be very careful in regedit!) -
Actually , I went there , but I couldn't understand how can I do the ATAPI update process ......
|
|
marcos90
Newbie
|
29. September 2005 @ 21:44 |
Link to this message
|
Ok! Better later than never .. sorry to delay ... but here is the atapi fixed ;
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 19:18:06
Nero version: 6.3.1.6
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <HITACHI DVD-ROM GD-8000 >Version: X010 - HA 0 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HITACHI DVD-ROM GD-8000 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HITACHI DVD-ROM GD-8000 E: CDRom0
HL-DT-ST CD-RW GCE-8520B D: CDRom1
HL-DT-ST DVDRAM GSA-4163 I: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 132MB (135676kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.9.2005
ISO compilation
19:52:03 #1 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:52:03 #2 Text 0 File Reader.cpp, Line 118
Reader running
19:52:03 #3 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4163B running
19:52:03 #4 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
19:52:03 #5 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media
19:52:04 #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 734559 (163:14.09, 1434MB)
19:52:04 #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
19:52:04 #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-RW
Disc Manufacturer: OPTODI - SCW004
Disc Application Code: 2, Disc Physical Code: 214
19:52:04 #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:52:04 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 734560 (734560) = #734560/163:14.10
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 734560 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
19:52:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1504378880, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
734560 | lead-out | 1 | 0x00 | 0x41
19:52:04 #12 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
19:52:05 #13 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.
19:52:05 #14 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
19:52:05 #15 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
19:52:05 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:52:05 #17 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 4:55,146 (295146ms) -> OK
19:52:05 #18 Text 0 File DVDMinusRW.cpp, Line 281
Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.
19:52:05 #19 Phase 136 File dlgbrnst.cpp, Line 1841
Quick Format DVD-RW
19:52:18 #20 Phase 65 File dlgbrnst.cpp, Line 1841
Burn process started
19:52:18 #21 Text 0 File DVDR.cpp, Line 1619
Recording mode: Restricted Overwrite Mode
19:52:18 #22 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON
19:52:18 #23 Text 0 File DVDR.cpp, Line 1760
Start write address at LBA 0
DVD high compatibility mode: Yes
19:52:18 #24 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 3
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19:56:52 #25 Text 0 File WriterStatus.cpp, Line 115
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 734560 (B3560h), lenght 0 blocks
19:56:52 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
19:56:53 #27 Text 0 File DVDR.cpp, Line 1970
EndDAO: Last written address was 734559
19:56:55 #28 Phase 133 File dlgbrnst.cpp, Line 1841
Writing short lead-out
19:57:34 #29 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
19:57:34 #30 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
19:57:34 #31 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
Advertisement
|
|
|
Moderator
|
30. September 2005 @ 06:54 |
Link to this message
|
Quote:
Nero version: 6.3.1.6
- too old, you've gone back to a much older version than you had before.. update to latest, 6.6.0.16
Quote:
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
- yup, Nero isn't detecting the burner properly
Quote:
Physical memory : 383MB (392688kB)
Free physical memory: 132MB (135676kB)
Memory in use : 65 %
- you need to close more programs down prior to any burns to free up more memory
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
