|
|
|
Nero has given up on me
|
|
Junior Member
|
6. September 2005 @ 21:01 |
Link to this message
|
|
I've always used the same DVD-R disk with Nero and suddenly it burns up to about 97% and it will hang for an hour before giving me an error or it will finish and fail. I checked out this board and uninstalled my old version of Nero to the new version but I'm still having problems.
Here is my log, hopefully one of you can tell me what I can do to fix this problem.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2004 1:24:34 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVD SOHD-167T >Version: 9S16 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-167T atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVD SOHD-167T E: CDRom0
LITE-ON DVDRW SOHW-1633S F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 45MB (46088kB)
Memory in use : 91 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.9.2005
DVD-Copy on the fly
9:29:37 PM #1 SCSI -1065 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02A45600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xAC 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
9:29:45 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
9:29:45 PM #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
9:29:45 PM #4 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x04 Start 0 Len 1724016 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
9:29:45 PM #5 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 1724016 = 1724016, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
9:29:45 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:29:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1724015 (383:06.65, 3367MB)
9:29:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
9:29:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: AML -
Disc Application Code: 64, Disc Physical Code: 193
9:29:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:29:45 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1724016 (1724016) = #1724016/383:6.66
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1724016 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
9:29:45 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3530784768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1724016 | lead-out | 1 | 0x41 | 0x00
9:29:45 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
9:29:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
9:29:45 PM #15 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
9:29:45 PM #16 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
9:29:45 PM #17 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
9:29:45 PM #18 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:30:19 PM #19 Text 0 File Cdrdrv.cpp, Line 1286
21:30:19.265 - LITE-ON DVDRW SOHW-1633S\H1 T1 : Queue again later
9:41:15 PM #20 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 1724016 (1A4E70h), lenght 0 blocks
9:41:15 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:41:15 PM #22 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1724015
9:41:54 PM #23 SCSI -1194 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03B44A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x04
9:41:54 PM #24 CDR -1194 File ThreadedTransferInterface.cpp, Line 1909
PMA update failure
9:41:54 PM #25 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909
Could not perform end of Disc-at-once
9:41:54 PM #26 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1
9:41:54 PM #27 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
LITE-ON DVDRW SOHW-1633S\H1 T1
9:41:54 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
9:41:54 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 1:24:34 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 8/27/2003 3:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 9/13/2004 12:54:06 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 9/13/2004 12:54:46 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 9/13/2004 12:58:10 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 9/3/2002 9:27:33 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Moderator
|
7. September 2005 @ 03:19 |
Link to this message
|
Quote:
Physical memory : 510MB (523244kB)
Free physical memory: 45MB (46088kB)
Memory in use : 91 %
- wow that's bad, you have sufficient total memory but something's eaten the lot, you need to close much more down prior to burns to ensure sufficient free memory
Quote:
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: AML -
Disc Application Code: 64, Disc Physical Code: 193
- a-ha, subpar media. you nedd to use decent media..
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
PMA update failure
Invalid write state
Burn process failed at 4x (5,540 KB/s)
- splat!, problem with the media as previous comment.
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 9/13/2004 12:54:06 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 9/13/2004 12:54:46 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 9/13/2004 12:58:10 PM (InCD4 driver for win NT/2K/XP))
- uninstall Nero, uninstall Nero completely via Nero Clean Tools -
http://www.nero.com/en/Clean_Tools.html and reinstall Nero, WITHOUT installing Nero's InCD (packet writing software), doesn't always play well with standard Nero Burning Rom..
Quote:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 9/3/2002 9:27:33 AM (Adapter driver for rec)
- your atapi drivers aren't loaded correctly, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 7. September 2005 @ 03:21
|
Junior Member
|
7. September 2005 @ 09:24 |
Link to this message
|
|
I took your advice, removed all of Nero with about 4 of those cleaning tools (including in CD), installed the updated drivers and reinstalled. During reinstallation I don't remember seeing anything where I can pick INCD but when I looked on my program files, it wasn't available the 2nd time around so I'm assuming it didn't install it. So I tried another disk, even though it's cheap media, it's all I have until something new arrives. Even then, I don't want to damage my new expensive media because Nero doesn't feel like burning anything.
So I tried another disk, got another error, got about my 50th coaster and here's the error report. I really hope I can get this fixed, I have to use my DVD everyday.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2004 1:24:34 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVD SOHD-167T >Version: 9S16 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-167T atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVD SOHD-167T E: CDRom0
LITE-ON DVDRW SOHW-1633S F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 71MB (72924kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.9.2005
UDF/ISO compilation
8:04:45 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
8:04:45 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
8:04:45 AM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:04:45 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
8:04:45 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
8:04:45 AM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
8:04:45 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:04:45 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:04:45 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:04:46 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2252863 (500:38.13, 4400MB)
8:04:46 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:04:46 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: AML -
Disc Application Code: 64, Disc Physical Code: 193
8:04:46 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:04:46 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2252864 (2252864) = #2252864/500:38.14
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2252864 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
8:04:46 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4613865472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2252864 | lead-out | 1 | 0x41 | 0x00
8:04:47 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:04:47 AM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
8:04:47 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:04:47 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
8:04:48 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:04:48 AM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
8:04:48 AM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
8:04:48 AM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
8:04:48 AM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:05:12 AM #25 Text 0 File Cdrdrv.cpp, Line 1286
08:05:12.656 - LITE-ON DVDRW SOHW-1633S\H1 T1 : Queue again later
8:19:16 AM #26 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2252864 (226040h), lenght 0 blocks
8:19:16 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:19:16 AM #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2252863
8:19:53 AM #29 SCSI -1194 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03B14A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x04
8:19:53 AM #30 CDR -1194 File ThreadedTransferInterface.cpp, Line 1909
PMA update failure
8:19:53 AM #31 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909
Could not perform end of Disc-at-once
8:19:53 AM #32 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1
8:19:53 AM #33 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
LITE-ON DVDRW SOHW-1633S\H1 T1
8:19:53 AM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
8:19:53 AM #35 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 1:24:34 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 8/27/2003 3:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 9/3/2002 9:27:33 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Isn't there something in the registry I can delete that will fix all of this? I remember there was some solution erasing the sum files from something... I see it says the same thing under atapi. I unzipped the files and it said they were successful so I don't know why it's saying that.
This message has been edited since posting. Last time this message was edited on 7. September 2005 @ 09:32
|
Moderator
|
7. September 2005 @ 09:40 |
Link to this message
|
I've just copy/pasted some of my previous comments
Quote:
Physical memory : 510MB (523244kB)
Free physical memory: 71MB (72924kB)
Memory in use : 86 %
wow that's bad, you have sufficient total memory but something's eaten the lot, you need to close much more down prior to burns to ensure sufficient free memory
Quote:
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
i don't use this mode, i always choose compilation type of 'dvd-video' in Nero
Quote:
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: AML -
Disc Application Code: 64, Disc Physical Code: 193
a-ha, subpar media. you need to use decent media..
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
PMA update failure
Invalid write state
Burn process failed at 4x (5,540 KB/s)
splat!, problem with the media as previous comment.
Quote:
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 9/3/2002 9:27:33 AM (Adapter driver for rec)
those drivers still aren't right. try this method - Quote:
Run REGEDIT. Go to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}
It has subkeys like 0000, 0001, 0002, etc. Normally 0001 is the primary IDE channel, 0002 the secondary, but other numbers can occur under certain circumstances. You have to go through these subkeys and check the DriverDesc value until you find the proper IDE channel.
Delete MasterIdDataChecksum or SlaveIdDataChecksum, depending on whether the device in question is attached as master or slave, but it can't actually hurt to delete both. Reboot. The drive DMA capabilities will be redetected.
Open Device Manager again and check whether the device is now actually using DMA mode. If so, congratulations, you've made it (at least until the next time Windows disables DMA).
i forgot to say on previous reply, you don't need to waste discs. just do 'simulation burns' in Nero, which go thru the motions of a burn, and ask for a blank disc, but don't actually write to the discs..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Junior Member
|
7. September 2005 @ 15:48 |
Link to this message
|
|
Wow, I wish I knew about simulation before!
The Regedit fixed it, that's how I always fixed it with recording cd's before and I forgot how to access it. You rock! Thank you so much for your help and taking the time out to do it. I am forever grateful. ;c)
|
|
Advertisement
|
|
|
Moderator
|
7. September 2005 @ 22:35 |
Link to this message
|
|
no worries, you're welcome. i've always known about simulation but never need to use it. trouble is i rarely used to remember to recommend it, so now i always make a point of it...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
