|
I have some problame with burning with Nero
Burn processes or simulation of burners it always reports errors so I saved the log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV8004H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 623MB (637972kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.9.2005
CueSheet
1:16:08 PM #1 Text 0 File Burncd.cpp, Line 2948
HL-DT-ST DVDRAM GSA-4163B
Buffer underrun protection activated
1:16:09 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
1:16:09 PM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
1:16:09 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using CD-R/RW media
1:16:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 207311 ( 46:06.11)
1:16:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
1:16:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4163B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
1:16:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:16:09 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 191562 (191562) = #191562/42:34.12
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 191562 blocks [HL-DT-ST DVDRAM GSA-4163B]
1: TRM_AUDIO_NOPRE (Cue Sheet Track)
2 indices, index0 (0) provided
original disc pos #0 + 15750 (15750) = #15750/3:30.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15750 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
1:16:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 450906624, ISRC ""
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 450906624 450906624 487950624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
191562 | 2 | 0 | 0x01 | 0x00
191562 | 2 | 1 | 0x01 | 0x00
207312 | lead-out | 1 | 0x01 | 0x00
1:16:09 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:16:09 PM #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
1:16:09 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:16:09 PM #14 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (1,200 KB/s)
1:16:09 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:16:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #191562
1:16:09 PM #17 Text 0 File Mmc.cpp, Line 16924
StartDAO : CD-Text - Off
1:16:09 PM #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
1:16:09 PM #19 Text 0 File Mmc.cpp, Line 17211
CueData, Len=40
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
01 02 01 00 00 2a 24 0c
01 aa 01 01 00 2e 06 0c
1:16:17 PM #20 Text 0 File Cdrdrv.cpp, Line 1286
13:16:17.531 - HL-DT-ST DVDRAM GSA-4163B\H1 T0 : Queue again later
1:16:37 PM #21 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04700000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x98 0x40 0xA6 0x80 0x08 0x03
1:16:37 PM #22 CDR -1024 File Writer.cpp, Line 311
Communication failure
1:16:37 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:16:37 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:16:49 PM #25 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 8x (1,200 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 6:07:00 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any ideas what can I do?
|
hiya...
Quote:
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103
- firmware's 2 revs out of date, A105 is here - http://forum.rpc1.org/dl_firmware.php?download_id=1973
Quote:
Recorder: HL-DT-ST DVDRAM GSA-4163B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
- if doing the firmware, and getting rid of InCD don't help, get better media..
Quote:
Communication failure
Simulation failed at 8x (1,200 KB/s)
- splat!
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
- get rid of Nero's InCD, uninstall Nero, uninstall completely via Nero's Clean Tools ' http://www.nero.com/en/Clean_Tools.html' then reinstall Nero WITHOUT InCD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 10. September 2005 @ 12:19
|
