|
|
|
Burn Process Failed
|
|
|
Ardee
Junior Member
|
12. September 2005 @ 13:08 |
Link to this message
|
|
I am using DVD Decrypter and then DVD shrink. I have burned successfully in the past. I am no receiving an error after it writes the "lead in" phase. I then get the whole error box with everything that went wrong. My bunrer is a Sony external. I am using Hp 8x DVD's. Like I said I ahve burned successfully in the past with the same things. If you need any more information let me know, Thanks Ryan
|
|
Advertisement
|
|
|
|
|
kalvinkan
Newbie
|
12. September 2005 @ 14:53 |
Link to this message
|
hi, there. i have used Decryptor and Shrink before and got the same problem. My problem was that after using the computer for a long time(months) the harddrive is fragmented therefore it could not supply enough data to the burner. I switched to Nero and it burn fine. the Nero burning engine is smarter than the burning engine that is included it Shrink. Your problem may not be same as mine. but i would recommend that u dump Shrink for 2 reasons:
1. Shrink was meant for shrinking your movie down. burning was included for the sake of convience only.
2. I know that shrink if free, but the quality is not worth it if u are collecting movies.
if u still wanted to use shrink then u should defragment your harddrive before burning again.
|
|
Ardee
Junior Member
|
12. September 2005 @ 15:50 |
Link to this message
|
So tell me how you used Nero to burn. I am lost my friend told me to get those two things and then burn it with shrink, which burns with Nero. I dont want to defrag the drive cause it takes FOREVER! But finih helping me out. And thanks for the help already! Ryan
|
|
Ardee
Junior Member
|
12. September 2005 @ 19:27 |
Link to this message
|
|
Ok so I defraged my hard drive but still got no love. Im not sure how to burn a DVD without using Shrink, and just using Nero, Im not sure what file to select ISO/UDF ect.. If I select one of those will the other DVD fit on one disk? I have pasted my log from my most recent try. Hope someone can help. Itd not to long Thanks.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 6:06:00 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-720A> Version: JY02 - HA 2 TA 0 - 6.6.0.2
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8483B D: CDRom0
SONY DVD RW DRU-720A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (522224kB)
Free physical memory: 157MB (160920kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.9.2005
NeroAPI
9:16:02 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
9:16:02 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
9:16:02 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
9:16:02 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
9:16:02 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-720A running
9:16:02 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:16:02 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
9:16:02 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
9:16:02 PM #9 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-At-Once, using DVD media
9:16:03 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2259567 (502:07.42, 4413MB)
9:16:03 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
9:16:03 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY DVD RW DRU-720A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
9:16:03 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:16:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2259568 (2259568) = #2259568/502:7.43
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2259568 blocks [SONY DVD RW DRU-720A]
--------------------------------------------------------------
9:16:03 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4627595264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2259568 | lead-out | 1 | 0x00 | 0x41
9:16:03 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
9:16:03 PM #17 Text 0 File Burncd.cpp, Line 4004
Cache writing successful.
9:16:03 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
9:16:03 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
9:16:03 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2568
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:16:03 PM #21 Text 0 File DVDR.cpp, Line 2202
Recording mode: Sequential Recording Mode
9:16:03 PM #22 Text 0 File Mmc.cpp, Line 20869
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
9:16:03 PM #23 Text 0 File DVDR.cpp, Line 2343
Start write address at LBA 0
DVD high compatibility mode: Yes
9:16:03 PM #24 Text 0 File Cdrdrv.cpp, Line 8310
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:16:03 PM #25 Text 0 File DVDR.cpp, Line 5291
Drive: SONY DVD RW DRU-720A
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0
9:16:42 PM #26 Text 0 File Cdrdrv.cpp, Line 1283
21:16:42.032 - SONY DVD RW DRU-720A\H2 T0 : Queue again later
9:19:09 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00C70000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x0A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
9:19:09 PM #28 CDR -1046 File Writer.cpp, Line 311
Illegal disc
9:19:09 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:19:09 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
9:19:09 PM #31 Text 0 File DVDR.cpp, Line 2586
EndDAO: Last written address was 2751
9:19:09 PM #32 Text 0 File DVDR.cpp, Line 5291
Drive: SONY DVD RW DRU-720A
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0
9:19:09 PM #33 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
9:19:09 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
9:19:09 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\NeroCD2k.sys': Ver=1.0.0.9, size=44227 bytes, created 8/7/2005 10:19:39 PM
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 6:06:00 AM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 7/15/2005 12:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 8/9/2005 12:05:48 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 13. September 2005 @ 08:20
|
|
Ardee
Junior Member
|
12. September 2005 @ 19:38 |
Link to this message
|
So I figured out how to burn just using Nero after I decrypted. But i still got the same exact message ILLEGAL DISC. It pisses me off cause I ahve burned over 100 DVD's and now all of the sudden, it doesnt work. Someone please help me out!!!!!
|
Moderator
|
12. September 2005 @ 22:35 |
Link to this message
|
@Ardee -
Quote:
1A22-************************
- EDIT OUT your serial number, it's probably been stolen by now
Quote:
Nero API version: 6.6.0.2
- that's a little out of date now. update to latest, which is 6.6.0.16
Quote:
Recorder: <SONY DVD RW DRU-720A> Version: JY02
- your burner's firmware is 4 versions out of date
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
- this question mark means one of 2 things, either your atapi drivers aren't loaded correctly, or your burner is external (which you've said it is). i notice down the bottom in the existing drivers section that there's no mention of ataip drivers, however when you reload the atapi drivers, this particular line should probably still have an question mark
Quote:
Physical memory : 509MB (522224kB)
Free physical memory: 157MB (160920kB)
Memory in use : 69 %
- sufficient total memory, but make sure to close down more programs prior to future burns
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2259567 (502:07.42, 4413MB)
- that's not too bad, but i suspect your target size hasn't been set in DVD Shrink. Set target size in Shrink's preferences to 4300MB, thus avoiding outer edge of discs and not sacrificing much space
Quote:
Recorder: SONY DVD RW DRU-720A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
- a-ha - the worst most atrocious media money can buy. Buy DECENT media such as Verbatim datalifeplus
Quote:
Illegal disc
- splat!
Quote:
Burn process failed at 8x (11,080 KB/s)
- you're torturing that bad media with 8x. most people recommend 4x for movies
Quote:
Existing drivers:
File 'Drivers\NeroCD2k.sys': Ver=1.0.0.9, size=44227 bytes, created 8/7/2005 10:19:39 PM
- i'd not come across this driver before in a logfile, and found that it's fine (it just checks for updates). I've bookmarked this link for my own benefit, to help with any similar threads thats come along. plus the link is hysterical - http://www.cdrinfo.com/Forum/tm.asp?m=76702&mpage=1&key=
As i mentioned up further up the reply, this section should list your atapi drivers, so make sure they're loaded by following this - http://home.comcast.net/~bbmayo/FAQ.htm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 12. September 2005 @ 23:01
|
|
colw
Senior Member
|
12. September 2005 @ 23:47 |
Link to this message
|
Also for information, DVD Shrink cannot burn in its own right. It can use a third party software such as Nero to burn but does not have its own burning capacity.
|
|
Ardee
Junior Member
|
13. September 2005 @ 08:44 |
Link to this message
|
So basically all the problem was, was not updating often enough. Thats easy enough to fix. I bought better quality DVD's and made sure to set my shrink to right Mb. I knew that Shrink didnt burn, it used Nero to burn. But anyways, Just wanted to say thank you for the help. Im going to try and burn again. Ryan
|
Moderator
|
13. September 2005 @ 09:59 |
Link to this message
|
|
no worries, but make sure to provide latest section of log after the next burn. in fact you could just do a 'simulation burn' which'll go thru the motions with a blank disc but not write to the disc, and provide that section of log, whether the burn works or not. If nothing else we could check you've ditched the foul media :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Ardee
Junior Member
|
13. September 2005 @ 12:00 |
Link to this message
|
Alright I did all that you said(I Hope) I tried to burn with a Verb disc, but still got the same thing. So I read the post again and notice that you left me another post, so instead of wasting another good dvd, I used the bad one. Here is the log that i got, again with another Illegal Disc. Anything different on this one? Thanks Ryan
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 6:06:00 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD RW DRU-720A> Version: JYC4 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8483B D: CDRom0
SONY DVD RW DRU-720A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (522224kB)
Free physical memory: 172MB (176524kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.9.2005
NeroAPI
1:33:09 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
1:33:09 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
1:33:09 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
1:33:09 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
1:33:09 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-720A running
1:33:09 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
1:33:09 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:33:09 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:33:10 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
1:33:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202159 (489:22.09, 4301MB)
1:33:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
1:33:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-720A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
1:33:10 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:33:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202160 (2202160) = #2202160/489:22.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202160 blocks [SONY DVD RW DRU-720A]
--------------------------------------------------------------
1:33:10 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510023680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202160 | lead-out | 1 | 0x41 | 0x00
1:33:10 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
1:33:10 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
1:33:10 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
1:33:10 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
1:33:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:33:10 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
1:33:10 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
1:33:10 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
1:33:10 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:33:41 PM #25 Text 0 File Cdrdrv.cpp, Line 1286
13:33:41.293 - SONY DVD RW DRU-720A\H2 T0 : Queue again later
1:37:22 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00C50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
1:37:22 PM #27 CDR -1046 File Writer.cpp, Line 311
Illegal disc
1:37:22 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:37:22 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:37:22 PM #30 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 703
1:37:22 PM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
1:37:22 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
1:37:22 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\NeroCD2k.sys': Ver=1.0.0.9, size=44227 bytes, created 8/7/2005 10:19:39 PM
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 6:06:00 AM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 7/15/2005 12:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 8/9/2005 12:05:48 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
13. September 2005 @ 12:05 |
Link to this message
|
|
eeeeewwwwwwwwww! you used a CMC disc again :(
use one of those Verb's, do a simulation burn with it so as not to waste the disc and post the log for that
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 13. September 2005 @ 12:05
|
|
kalvinkan
Newbie
|
13. September 2005 @ 13:37 |
Link to this message
|
|
why don't u try to burn that dvd in your friends computer to verify the disc. try to burn any small file. if the disc is good then i think your drive is at the end of its life. cuz u said that u have burn over 100s of disc.
|
|
Ardee
Junior Member
|
13. September 2005 @ 14:21 |
Link to this message
|
|
There is no way my burner is at its end. Its not even a month old. Even if it is at its end its under warranty :). But I dont think that to be the cause of this all. I ave only burned about 100 not 100's. But we will soon get this all figured out. Creaky did you notice anything unusual in the last log? besides my cheap media? :) I am at work until 10 tonight so I wont be able to simulate a good disc. But I will post in the morning. Let me know if you noticed anything new or unusual. Thanks Ryan
|
|
Ardee
Junior Member
|
13. September 2005 @ 18:53 |
Link to this message
|
|
I tried in asense what you said about burning the disc at a friends house. However I took the whole burner to my friends house, used the Memorex dvd and burned without a problem. So whats the story here? Why does it burn on his computer and not mine? I defraged tried disk cleanup and all that junk, but i still got no love. So should i uninstall the burner and reload it? what are some troubleshooting things I can do? Ryan
|
Moderator
|
13. September 2005 @ 23:20 |
Link to this message
|
|
@Ardee - that's the problem with crap media - it's inconsistent. other than that your logfile is fine. you nedd to try decent media (simulation burn) and post the log....
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
kalvinkan
Newbie
|
14. September 2005 @ 13:44 |
Link to this message
|
|
I am glad that u brought the burner and the media to your friend's house. By doing that we can rule out the drive or the media's fault.
so it must be your computer. but there are many things that can go wrong. u can use the same method (trial and error) to rule each 1out OR u do a clean reinstall of windows. I used to fix computers for a living and the experiece that i learned is if i cannot fix something in 30 minutes then i will do a reinstall with the quick format. Obviously, u have wasted a day or 2 on this issue and still its not working. If u decide to do a clean reinstall and still it dosn't work then offer to fix it for u provided that u live in Toronto, Ontario. :-) if i can't fix it i will buy u a new computer!
ps. Memorex is not cheap media, they have been in bussiness for a long long time. i know that some cmc media is bad, but CMC will not dare to cheat Memorex.
|
|
Ardee
Junior Member
|
14. September 2005 @ 14:15 |
Link to this message
|
|
Well here is the story. I first tried a better brand DVD, but I didnt get any luck, so like i said i brought it over to the friends house used the memorex and it worked. So i just took it home shut down norton and some other programs that were running in back, did disck sweep and clean up and burned with the higher grade media, worked perfect! Burned 4 dvds today, it went well. Thanks for everyones help. Ryan
|
|
player19
Suspended due to non-functional email address
|
14. September 2005 @ 14:59 |
Link to this message
|
hey I have been trying to burn some dvds,but most of the time I get an erro. It always says that the burn process has failed. What can I do? here's my log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 11:06:00 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <MATSHITA DVD-RAM SW-9585>Version: B100 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA DVD-RAM SW-9585 >Version: B100 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00GVC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM SW-9585 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM SW-9585 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical
memory: 256MB (263040kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.9.2005
UDF/ISO compilation
3:29:19 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
3:29:19 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
3:29:19 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:29:19 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
3:29:20 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
3:29:20 PM #6 Text 0 File Writer.cpp, Line 122
Writer MATSHITA DVD-RAM SW-9585 running
3:29:20 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:29:20 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:29:20 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
3:29:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2000079 (444:27.54, 3906MB)
3:29:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
3:29:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MATSHITA DVD-RAM SW-9585, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
3:29:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:29:20 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2000080 (2000080) = #2000080/444:27.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2000080 blocks [MATSHITA DVD-RAM SW-9585]
--------------------------------------------------------------
3:29:20 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MATSHITA DVD-RAM SW-9585] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4096163840, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2000080 | lead-out | 1 | 0x41 | 0x00
3:29:20 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
3:29:20 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
3:29:20 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
3:29:20 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
3:29:20 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:29:20 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 09 00 3C 65 00 - A0 5F 14 14 0A 0A 0A 0A #T7..<e.._......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
3:29:20 PM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
3:34:43 PM #23 SCSI -400 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x033C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x11 0x94 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x11 0x91 0x00 0x0A
0x00 0x3C 0x00 0x00 0x03 0x01
3:34:43 PM #24 CDR -400 File Writer.cpp, Line 311
Unspecified target error
3:34:43 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:34:43 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:34:54 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
kalvinkan
Newbie
|
14. September 2005 @ 15:47 |
Link to this message
|
|
Player19, I think your problem is same as Ardee, too many software installed therefore conflict.
Reading the log file tells u: 1. your drive brand
2. your media brand
3. your burning process started
4. it failed.
nothing else that u and i don't already know.
So do the same thing as Ardee did, defrag your harddrive, shutdown all the background software and uninstall all the unecessary software. and then try again.
If all that doesn't work and u still don't have a clue then reinstall winxp. with a clean reinstallation there would be no conflict of anything. reinstallation is gaurante to work but it takes long time i know. :-) good luck
|
|
Ardee
Junior Member
|
14. September 2005 @ 18:40 |
Link to this message
|
|
Also make sure that your firmware and all your burning and decrypting software is up to date. On a reply that creaky left he leaves a link to the firmware site. All you need to do is find your make and model, then find the newest update and download it. Then run the file and it will update it automatically. It took me two days to figure out, but in the end it was just updating and making sure that I had decent media and not alot of junk on my computer. Good luck i know how you feel
|
|
Ardee
Junior Member
|
14. September 2005 @ 18:47 |
Link to this message
|
Playa Here is the link to the sire with the firmware http://forum.rpc1.org/dl_all.php also your version is out of date. you have b100 and the newest is b101, just like I said download it then run the file and it will update automatically. Make sure your nero version is the newest, you can visit nero's website and select the upgrade. Have fun
This message has been edited since posting. Last time this message was edited on 14. September 2005 @ 18:48
|
|
player19
Suspended due to non-functional email address
|
14. September 2005 @ 22:07 |
Link to this message
|
|
hey thanks for helping me. Unfortunately I don't know how to upgrade my firmware. This is all I know about my driver: D:/MATSHITADVD-RAM SW-9585. Please can somone explain wiht details what update I need for my driver. I will apriciate it.
|
Moderator
|
14. September 2005 @ 22:21 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
player19
Suspended due to non-functional email address
|
14. September 2005 @ 23:45 |
Link to this message
|
|
Thanks for your help creaky, but unfortunatly the update isn't good because every time I try to update the firmware a screen appears saying "download nogood". Is it supposed to do that? I wish I knew how to solve this problem. Please I need your help. Can you please help me? I am desperate!!!.
This message has been edited since posting. Last time this message was edited on 14. September 2005 @ 23:47
|
|
Advertisement
|
|
|
Moderator
|
15. September 2005 @ 00:16 |
Link to this message
|
@player19 - need more exact info re the firmware problem, ie is it downloading the file that you have a problem with, or running the firmware update ?
p.s. i forgot to mention, there's nothing wrong in your logfile, other than the firmwware being slightly out of date, everything else looks fine. so......re-checked thru the logfile and the firmware is actually recognising this particular disc fine, ie there 3 lines below -
Quote:
Recorder: MATSHITA DVD-RAM SW-9585, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
If the firmware wasn't up to date enough for these particular discs, you'd only see the 1st line out of those 3 lines, in your logfile..
so....not sure the firmware will help for these discs (will help for other discs though), therefore you have two choices here, update the firmware anyway, and if the problem still persists with these same discs, then you'll need to try better discs
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
