|
Unable to get firmware for LVW 5005X?
|
|
|
NickoMcB
Newbie
|
13. September 2005 @ 13:37 |
Link to this message
|
|
I went to LiteOn's website, put in my serial number(for just the 5005 no x) and it comes back as wrong serial. I'm trying to disable mv, and catfreaks suggestion on just turning on the recorder 1st for 10 seconds then the dvd didn't work. Anyone hack a LVW 5005X yet?
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
14. September 2005 @ 20:22 |
Link to this message
|
DISCLAIMER: If you find a posting or message from me
offensive, inappropriate, or disruptive, please ignore it.
If you dont know how to ignore a posting, complain to
me and I will be only too happy to demonstrate . . .
This message has been edited since posting. Last time this message was edited on 14. September 2005 @ 20:25
|
|
NickoMcB
Newbie
|
15. September 2005 @ 03:46 |
Link to this message
|
|
Yea nobody has the firmware for a 5005x to hack in the first place. I guess I just have to wait a bit for one to come out.
|
|
GotSilk
Junior Member
|
19. September 2005 @ 02:36 |
Link to this message
|
|
I seems to me that someone in a previous post said something to the effect that all you needed to do to defeat M.V. was to hit record with the tray open and disc in; a few seconds before the movie starts and wala no M.V. I don't if that really works, but you can give it try just to see for yourself. Also be careful in using so called M.V. hacks as they have been known to screw up DVD recorders if applied incorrectly.
If knowledge is power then why do I so feel powerless
|
|
NickoMcB
Newbie
|
19. September 2005 @ 14:55 |
Link to this message
|
|
no dice, it won't even do anything with the tray still open...
|
AfterDawn Addict
|
20. September 2005 @ 07:28 |
Link to this message
|
|
What I posted in other threads (and I'll repost here) is: To defeat Macrovision on my LVW-5005 recorders is: First I start the recorder recording before I start the source .. Example . If I want to duplicate a DVD, I insert a DVD in the source and let it cycle until it comes to the menu. Then I start my recorder recording for about 5-10 seconds. I then start the source DVD. For a VHS, I press play on the VCR and then pause the tape . Then I start recording on the DVD recorder again for 5-10 seconds . I then press play on the VCR. This method has yet to fail for me on either of my recorders.
DISCLAIMER: If you find a posting or message from me
offensive, inappropriate, or disruptive, please ignore it.
If you dont know how to ignore a posting, complain to
me and I will be only too happy to demonstrate . . .
|
|
NickoMcB
Newbie
|
20. September 2005 @ 16:55 |
Link to this message
|
|
It doesn't work on mine, I tried it a couple of times exactly as you said, even letting it run for 20 seconds before turning on the dvd, still no luck..
|
|
btjorgens
Newbie
|
28. October 2005 @ 18:36 |
Link to this message
|
The firmware for the 5005x was posted on 10/13/2005 on the liteonamericas we site: http://www.liteonamericas.com/us/download_dvd.htm
This page does not ask for serial numbers.
The full link for the new file is:
http://www.liteonamericas.com/us/Download/CE_firmware/5005X/LNFC1...
I was able to download the new file, copy it to a cdr-r and upgrade my 5005x. I found that you must navigate to the LiteOn logo screen using the 'source' button on the remote or front panel to get the 5005x to recognize the upgrade CD.
After doing so, I was dissapointed to discover that 3 hour (LP) recording mode was not enabled.
I've been using my 5005x to copy tapes made with my old Video8 camcorder to DVD+R, so I started a copy session to see how it looked. The 5005x locked up 5 minutes into the process. After a powercycle, the DVD was not recognized and was thus added to my growing 'coaster' collection.
I then visited Mr. Wizard's site http://ilohacker.tripod.com/ and downloaded the ilo hacker utility and used it to patch the firmware file to disable macrovision and enable 3 hr record mode. After burning to disk, I upgraded my 5005x successfully. Per the recomendations on Mr. Wizard's, I restored the config to factory defaults both before and after the upgrade. To restore defaults, go to Setup->System->Default->Restore.
I've confirmed that 3 hour record mode is now available.
I started the recording the same Video8 tape as before to DVD+R using 2 hour (SP) mode and let it run until the disk became full. I wanted to see if the new firmware handled the full disk issue. No Joy. When the DVD becomes full, the 5005x hangs at the stopping stage. I've had better luck previously copying to DVD+RW and then copying this disk to DVD+R. DVD+RW doesn't need to be finalized.
I suspect that some of the issues I was having with recording on the 5005x were related to breaks in the video being falsely categorized as Macrovision copy protection frames. I'll need to do more testing before I know if the hacked FW with Macrovision disabled helps.
Bruce
|
AfterDawn Addict
|
28. October 2005 @ 20:14 |
Link to this message
|
It seems that the 5005x has some issues that the 5005 didn't have. Using a DVD+R, I have no problem running the disc all the way to the end. The disc stops and DVD is full is displayed on the TV screen. I then finalize the disc and everything is just fine. It was that way on both of my recorders and since I updated the firmware on the older one to match the newer one, I can now exchange unfinalized discs also. For some reason, neither drive ever recognized Macrovision, and I made sure not to U/D my firmware too far. As far as 3 hr mode, I never bothered with it.
I guess what I'm getting at is that after Christmas I was planning on purchasing another. I will make sure NOT to get a 5005x. I also plan to downgrade my F/W to match my other two.
DISCLAIMER: If you find a posting or message from me
offensive, inappropriate, or disruptive, please ignore it.
If you dont know how to ignore a posting, complain to
me and I will be only too happy to demonstrate . . .
|
|
fonzfree
Newbie
|
29. October 2005 @ 12:18 |
Link to this message
|
Quote:
I was able to download the new file, copy it to a cdr-r and upgrade my 5005x. I found that you must navigate to the LiteOn logo screen using the 'source' button on the remote or front panel to get the 5005x to recognize the upgrade CD.]
Can some please provide more details on how to update the 5005X firmware? I also have an LVW-5001 and it recognizes the CD-R and the firmware file just fine, but when I put the updated 5005X firmware file on CD-R into the 5005X, the unit just says "no disc". I tried going to the logo screen, but it didn't work or I didn't do something in exactly the right order. If you can provide any details on the specific steps or any other ideas, it would be greatly appreciated.
|
|
fonzfree
Newbie
|
29. October 2005 @ 12:19 |
Link to this message
|
Sorry, here's how my last post should have looked:
Quote:
I was able to download the new file, copy it to a cdr-r and upgrade my 5005x. I found that you must navigate to the LiteOn logo screen using the 'source' button on the remote or front panel to get the 5005x to recognize the upgrade CD.
Can some please provide more details on how to update the 5005X firmware? I also have an LVW-5001 and it recognizes the CD-R and the firmware file just fine, but when I put the updated 5005X firmware file on CD-R into the 5005X, the unit just says "no disc". I tried going to the logo screen, but it didn't work or I didn't do something in exactly the right order. If you can provide any details on the specific steps or any other ideas, it would be greatly appreciated.
|
|
fonzfree
Newbie
|
29. October 2005 @ 14:24 |
Link to this message
|
|
This is so weird. I had tried loading my CD-R and a CD-RW several times with no luck. I had the CD-RW in the drive and the screen saver was going. I hit the eject button to eject the disc and then reloaded it again. Bingo! It actually worked this time. The only difference this time was that the screen saver had been on. I don't know if that's what others have meant by the logo/splash screen, but it amazingly worked. Thank you!
|
|
btjorgens
Newbie
|
29. October 2005 @ 14:41 |
Link to this message
|
|
This is what I found I needed to do:
1) power on the 5005x
2) enter display mode by pressing 'display' on the remote.
3) navigate to the 'logo screen' using 'source' on the remote
4) open the tray with 'open/close' on the remote.
5) insert the CD-R disk with the LNFC1101.ESO file on it.
6) close the tray with 'open/close' on the remote.
The front panel display will flash 'LOAD' and then change to 'F-UP 0101'. At the same time the message 'System will be upgraded. Press Ok to proceed or Cancel to abort. OK CANCEL'
7) select 'OK' with the arrow keys on the remote.
8) press 'enter' on the remote.
The front panel display will change to 'A-UP NUM', where num starts at 00 and increments to 99 as the upgrade proceeeds. A warning is display on the screen at this point to let the upgrade proceed normally and not to interrupt it.
After the upgrade completes, a message is displayed to 'Power Off the unit and restart it.' If I remember correctly, the tray is ejected for you.
9) power off the 5005x using the 'power' button on the remote.
10) power on the 5005x using the 'power' button on the remote.
You will probably need to rescan your TV channels and some other settings after powering the upgrade.
Prior to the upgrade, my serial number read:
0107 1840 0098 G2BD (108-010D)
After the upgrade, my serial number read:
0107 1840 0101 G2BD (100-010D)
After hacking the file with Mr. Wizard's tool and performing the upgrade again, my serial number read:
0107 1840 0101 G2BD (000-010D)
Bruce
|
AfterDawn Addict
|
29. October 2005 @ 16:39 |
Link to this message
|
|
Did the Macrovision hack work with the 0101 firmware? On my 5005, I had to downgrade back to 0098 to disable Macrovision (no hack necessary)
|
|
btjorgens
Newbie
|
29. October 2005 @ 17:09 |
Link to this message
|
|
I hadn't tried explicitly attempting to copy something with 0098. With the hacked 0101 firmware, pressing the record button with 'Prince of Egypt' playing on the VCR into the AV1 inputs on the 5005x shows 'Protected Content' and does not start recording.
If I record 20 seconds of TV and then press play on the VCR, the 5005x starts recording, but within about 5 seconds, the 'Protected Content' message appears again and recording stops.
I bought my 5005x to record TV and to help copy my Video8 collection to DVD. I really don't care if Macrovision is disabled unless MV detection erroneously screws up my ability to use it.
Bruce
|
|
fonzfree
Newbie
|
29. October 2005 @ 17:10 |
Link to this message
|
|
catfreek, do you have the 5005 or the 5005X?
|
|
fonzfree
Newbie
|
29. October 2005 @ 17:19 |
Link to this message
|
|
btjorgens, is the 0098 for the 5005X? Where can I download it?
|
|
btjorgens
Newbie
|
29. October 2005 @ 18:44 |
Link to this message
|
|
fonzfree, my 5005x had 0098 on it when I bought it. To my knowledge, 0101 is the first firmware that LiteOn has released for the 5005x.
Bruce
|
AfterDawn Addict
|
29. October 2005 @ 19:37 |
Link to this message
|
|
I have two 5005 recorders but, as far as I understand, the firmware in interchangeable
|
|
NickoMcB
Newbie
|
31. October 2005 @ 01:30 |
Link to this message
|
|
btjorgens,
so the hack didn't disable mv? What about 3hr mode? I got the firmware, but haven't installed it yet. My serial is 0107 1840 0098 B20B btw. If all the hack did was get you the 3hr mode and you still have MV I don't think I'll chance it.
|
|
NickoMcB
Newbie
|
31. October 2005 @ 01:33 |
Link to this message
|
|
Did you do a system update also or just the firmware?
|
|
btjorgens
Newbie
|
31. October 2005 @ 05:36 |
Link to this message
|
|
I'm not aware of how to tell the difference between a system update and a firmware update. There is only one file available from liteon and it was the one I used.
And yes, with the hacked 0101 FW 3 hour mode is enabled and works fine.
Bruce
|
|
NickoMcB
Newbie
|
31. October 2005 @ 06:40 |
Link to this message
|
|
|
AfterDawn Addict
|
31. October 2005 @ 06:41 |
Link to this message
|
Quote:
I have two 5005 recorders but, as far as I understand, the firmware in interchangeable
Upon further investigation, I have learned that the firmware statement is not correct ... Sorry.
Here is a link to an interesting thread of another forum that is discussing the difference between the 5005 and the 5005x
http://club.cdfreaks.com/showthread.php?t=151282
DISCLAIMER: If you find a posting or message from me
offensive, inappropriate, or disruptive, please ignore it.
If you dont know how to ignore a posting, complain to
me and I will be only too happy to demonstrate . . .
This message has been edited since posting. Last time this message was edited on 31. October 2005 @ 06:42
|
|
Advertisement
|
|
|
|
NickoMcB
Newbie
|
31. October 2005 @ 07:23 |
Link to this message
|
|
so I bought a leftover piece of junk??
|
