|
Here is the log file. Sometimes I can bur one then it will fail other times I can not burn at all even after a fresh reboot...here is the log file:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/13/2005 1:50:16 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15h
(Nero Express)
Recorder: <SONY DVD RW DW-D56A> Version: PFS3 - HA 0 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DW-D56A >Version: PFS3 - HA 0 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2100AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-D56A atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D56A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 434MB (444608kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.9.2005
===== Disc-Copy over image - 1st step : Copy to image ...
10:19:43 AM #1 Text 0 File Reader.cpp, Line 127
Reader running
10:19:43 AM #2 Phase 48 File dlgbrnst.cpp, Line 1832
Analyzing disc
10:19:43 AM #3 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
10:19:48 AM #4 CDCOPY -1 File CDCopy.cpp, Line 1912
The CD is copyrighted
10:19:49 AM #5 Text 0 File CDCopy.cpp, Line 2128
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 51111 51110 ( 11:23.35)
10:19:49 AM #6 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 51111 = 51111, data (TRM_DATA_MODE1, block size 2048)
10:19:49 AM #7 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using CD-R/RW media
10:19:49 AM #8 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 445499 ( 99:01.74)
Last address to be written: 51110 ( 11:23.35)
10:19:49 AM #9 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
10:19:49 AM #10 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
10:19:49 AM #11 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:19:49 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 51111 (51111) = #51111/11:21.36
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51111 blocks [Image Recorder]
--------------------------------------------------------------
10:19:49 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 104982528, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
51111 | lead-out | 1 | 0x41 | 0x00
10:19:49 AM #14 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
10:19:49 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:20:54 AM #16 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 51111 (C7A7h), lenght 0 blocks
10:20:54 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:20:57 AM #18 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
10:21:01 AM #1 Text 0 File Burncd.cpp, Line 2946
SONY DVD RW DW-D56A
Power-Burn activated
10:21:01 AM #2 Text 0 File Reader.cpp, Line 127
Reader running
10:21:01 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 104982528
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=11:21.36 ( 51111) RecDep=0x00
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Documents and Settings\Timl\My Documents\TempImage.nrg>
10:21:01 AM #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using CD-R/RW media
10:21:31 AM #5 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 51110 ( 11:23.35)
10:21:31 AM #6 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
10:21:31 AM #7 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: SONY DVD RW DW-D56A;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
10:21:31 AM #8 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
10:21:31 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) provided
original disc pos #0 + 51111 (51111) = #51111/11:21.36
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 51111 blocks [SONY DVD RW DW-D56A]
--------------------------------------------------------------
10:21:31 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DW-D56A] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 125486928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
51111 | lead-out | 1 | 0x41 | 0x00
10:21:31 AM #11 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3,600 KB/s)
10:21:31 AM #12 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03994E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x3A 0x00
10:21:31 AM #13 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03997600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x52 0x01 0x00 0x00 0x00 0xFF 0x00 0x00 0x1C 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x3A 0x00
10:21:31 AM #14 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03997800
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x25 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x3A 0x00
10:21:31 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:21:31 AM #16 Text 0 File Mmc.cpp, Line 16883
StartDAO : CD-Text - Off
10:21:31 AM #17 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03994E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x3A 0x00
10:21:31 AM #18 CDR -1080 File ThreadedTransferInterface.cpp, Line 1763
Disc not present
10:21:31 AM #19 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1763
Could not perform start of Disc-at-once
10:21:31 AM #20 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3,600 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/13/2005 1:50:16 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 1/12/2005 6:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 8:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
