|
|
|
Can't Play DVD burned with Nero
|
|
|
stosh
Newbie
|
15. September 2005 @ 08:16 |
Link to this message
|
|
I apologize if this question had been answered previously.
I received a DVD disc (DVD +RW) from a friend of mine that I am unable to play in any of DVD players. My home stereo player (a Sony DVP-650) says there is no disc inserted. When I try to play the disc using the WinXP media player in my computer DVD player, (an NEC 2510), brings up the menu screen but when i try to play a chapter, it displays the exclamation amrk next to each chapter as it cycles through them, only playing the last chapter with an error message saying that it can't play the disc. I am, however, intermittently able to view the contents of the disc in Windows Explorer. I tried copying the files to my hard drive and re-burning them on one of my dvd discs that I know works on all my players- but I have the same problem.
In looking at the contents of the disc the other day, I noticed that next to the "vob" files, it says "nero Showtime 2 file". I assumed that that meant the discs were burned using Nero. So, I opened the Showtime 2 player in WIndows, and to my surprise, the DVD played fine - but it doesn't play anywhere else.
Would someone please enlighten me as to what is causing this problem? I'm grateful that I am able to play the disc on my computer, but I would really like to play it on my home entertainment system.
thanks.
|
|
Advertisement
|
 |
|
|
|
stosh
Newbie
|
15. September 2005 @ 19:42 |
Link to this message
|
|
*bump*
I'd really appreciate it if someone could help me out...
|
Moderator
|
16. September 2005 @ 06:28 |
Link to this message
|
not at all standalone players can play rewritables, even my players wouldn't play them after booktyping to dvd-rom format...
for me/us to properly analyse this, can you pls provide LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log (this is provided the last thing in your log was from when you reburnt the rewritable to this new disc) or just make sure to provide the section of log pertaining to the burning of that last disc...
Nero logs provide a very good insight into a system's settings for burning, so generally analysing a logfile can get people up and burning quite quickly...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
stosh
Newbie
|
17. September 2005 @ 10:44 |
Link to this message
|
Hi creaky,
thanks so much for your reply.
Here is the contents of the log file you mentioned:
====== *** Nero-Burning Rom, History File *** ======
Home
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 7:53:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.20
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.16 - HA 1 TA 1 - 6.3.1.20
Adapter driver: <IdeChnDr> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-ROM DVD-106 >Version: 1.22 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <IdeChnDr> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-106 IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A IdeChnDr Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-ROM DVD-106 D: CDRom0
_NEC DVD_RW ND-2510A E: CDRom1
Generic DVD-ROM F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 164MB (168332kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.8.2005
UDF/ISO compilation
8:44:19 AM #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started
8:44:19 AM #2 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.IFO has been modified
8:44:19 AM #3 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.BUP has been modified
8:44:19 AM #4 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VTS_01_0.IFO has been modified
8:44:19 AM #5 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VTS_01_0.BUP has been modified
8:44:19 AM #6 Phase 113 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed
8:44:19 AM #7 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:44:19 AM #8 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted
8:44:19 AM #9 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in EEPROM, command version 2
8:44:19 AM #10 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in EEPROM, command version 2
8:44:19 AM #11 Text 0 File Reader.cpp, Line 126
Reader running
8:44:19 AM #12 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running
8:44:19 AM #13 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:44:19 AM #14 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:44:19 AM #15 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media
8:44:19 AM #16 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2132095 (473:47.70, 4164MB)
8:44:19 AM #17 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
8:44:19 AM #18 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD+R
8:44:19 AM #19 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:44:19 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2132096 (2132096) = #2132096/473:47.71
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2132096 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------
8:44:19 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4366532608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2132096 | lead-out | 1 | 0x00 | 0x41
8:44:20 AM #22 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
8:44:20 AM #23 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
8:44:20 AM #24 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
8:44:20 AM #25 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 6x (8,310 KB/s)
8:44:20 AM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:44:20 AM #27 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x034D6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
8:44:20 AM #28 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in EEPROM, command version 2
8:44:20 AM #29 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in EEPROM, command version 2
8:44:20 AM #30 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in EEPROM, command version 2
8:44:20 AM #31 Text 0 File DVDR.cpp, Line 4661
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM
8:44:20 AM #32 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 8:56,377 (536377ms) -> OK
8:44:20 AM #33 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
8:53:57 AM #34 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2132096 (208880h), lenght 0 blocks
8:53:57 AM #35 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:54:23 AM #36 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
8:54:23 AM #37 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2
8:54:23 AM #38 Text 0 File DVDR.cpp, Line 5367
Booktype counter: 500, Booktype selected in RAM, command version 2
8:54:23 AM #39 Text 0 File DVDR.cpp, Line 4661
Drive: _NEC DVD_RW ND-2510A
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM
8:54:23 AM #40 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
8:54:23 AM #41 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 6x (8,310 KB/s)
8:54:23 AM #42 Phase 78 File dlgbrnst.cpp, Line 1855
Data verification started
8:54:39 AM #43 SCSI -1093 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x037B4000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x20 0x88 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x20 0x88 0x60 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
8:54:39 AM #44 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
Error during reading the sector: 2132064
9:04:35 AM #45 Text 0 File UDFCompilationImpl.cpp, Line 1385
Total files=11, identical=11, different=0, inaccessible=0, skipped=0.
9:04:35 AM #46 Phase 80 File dlgbrnst.cpp, Line 1855
Data verification completed successfully
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 7:53:46 PM
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 4/22/2002 1:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
I'm 99% sure that this is the log of the disc that I burned from the discs I received. I was mistkane about one thing though. The disc I received is a Memorex "DVD +R" I think previouslt I thought it was a "DVD +RW" which is incorrect.
Please let me know what you think. As I mentioned before the VOB and ifo files on the disc are listed as "Nero SHowtime" files. I was thinking that that was maybe causing the problem, but I'm not sure.
thanks again.
Stosh
|
Moderator
|
17. September 2005 @ 11:01 |
Link to this message
|
Quote:
Nero version: 6.3.1.20
- too old, update to 6.6.0.16 from here - http://www.nero.com/en/nero-up.php
Quote:
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.16
- burner's firmware is 2 versions behind, 2.18 is here - http://forum.rpc1.org/dl_firmware.php?download_id=1837
Quote:
DiskPeripheral : MAXTOR 6L080J4 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-106 IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A IdeChnDr Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
- i'm not sure i've come across 'IdeChnDr' drivers before, but DMA needs to be ON. reload your motherboard's drivers
Quote:
Physical memory : 511MB (523744kB)
Free physical memory: 164MB (168332kB)
Memory in use : 67 %
- sufficient total memory but you need to close down more programs prior to burning
Quote:
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD+R
- yup, firmware's out of date, this should be a 3-liner similar to this -
Quote:
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Error during reading the sector: 2132064
- your firmware needs updating as mention further up my reply.
As to the VOB and IFO files listed being listed as Nero Showtime files, that's not the cause of your problem..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 17. September 2005 @ 11:02
|
|
stosh
Newbie
|
18. September 2005 @ 05:54 |
Link to this message
|
Hi creaky,
ok, lets see how I did. After looking on the net, I found that the "IdeChnDr " you mentioned earlier has to do with the Intel Application Accelerator. I had to uninstall that before installing the Nero update. I was unable to find where I turn on the DMA for the drives, and I didn't have an "Advanced" tab in the "Properties" of the DVD Player, and if this program was installed, there wasn't the advanced tab so I uninstalled it(it didn't make a difference I don't think). So, now DMA is enabled, except for where it lists the "generic DVD player". I don't what that is. I only have the DVD Player, so I'm not sure what that is.
I updated the firmware on the burner, as per your suggestion. However, in the log file (pasted below), it still only lists one line.
So, after doing these things, I tried burned the dvd again, and the result was pretty much the same, the only difference was that it was able to play the disc, but really slowly, and lots of freeze frames - I eventually gave up because it seemed like it was just sitting there.
ANyway, please let me know what you think. I wanted to mention again, that before I received this disc, I never had a problem playing or burning a dvd. It is only this disc that I am unable to play, and even if I copy the files tomy hard drive and burn it onto one of my discs, I get the same result.
------Nero log file--------------
====== *** Nero-Burning Rom, History File *** ======
Home
serial removed
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 7:53:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.18 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-ROM DVD-106 >Version: 1.22 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-106 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-ROM DVD-106 D: CDRom3
_NEC DVD_RW ND-2510A E: CDRom4
Generic DVD-ROM F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572320kB)
Free physical memory: 959MB (982084kB)
Memory in use : 37
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.9.2005
UDF/ISO compilation
1:20:08 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
1:20:08 AM #2 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.IFO has been modified
1:20:08 AM #3 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.BUP has been modified
1:20:08 AM #4 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.IFO has been modified
1:20:08 AM #5 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.BUP has been modified
1:20:08 AM #6 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed
1:20:08 AM #7 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:20:08 AM #8 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
1:20:08 AM #9 Text 0 File Reader.cpp, Line 127
Reader running
1:20:08 AM #10 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2510A running
1:20:08 AM #11 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:20:08 AM #12 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:20:08 AM #13 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
1:20:09 AM #14 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2028895 (450:51.70, 3962MB)
1:20:09 AM #15 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
1:20:09 AM #16 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD+R
1:20:09 AM #17 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:20:09 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2028896 (2028896) = #2028896/450:51.71
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2028896 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------
1:20:09 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4155179008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2028896 | lead-out | 1 | 0x41 | 0x00
1:20:09 AM #20 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:20:09 AM #21 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
1:20:09 AM #22 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:20:09 AM #23 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 6x (8,310 KB/s)
1:20:09 AM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:20:09 AM #25 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04C70600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
1:20:09 AM #26 SCSI -1065 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03A15600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
1:20:09 AM #27 SCSI -1065 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03A15600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
1:20:09 AM #28 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
1:29:21 AM #29 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2028896 (1EF560h), lenght 0 blocks
1:29:21 AM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:29:44 AM #31 SCSI -1065 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03A15600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
1:29:44 AM #32 SCSI -1065 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03A15600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
1:29:44 AM #33 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 7:53:46 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
thanks again...
|
Moderator
|
18. September 2005 @ 06:11 |
Link to this message
|
|
that'll teach me - i didn't do any searching for "IdeChnDr ", otherwise i'd have known ut was the pesky Intel Application Accelerator, and all i seem to see about that is people recommended to ditch the blessed thing!. (i've heard of it, just not heard of the drivers being called "IdeChnDr ").
just having a look at the log now
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Moderator
|
18. September 2005 @ 06:15 |
Link to this message
|
ok, have read the rest of your reply/been thru the log, and you're right, Quote:
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD+R
- still only 1 line.
Thus the media has to be newer than your firmware knows what to do with. All i can think of here is for you to download dvd identifier (free) from here - http://www.afterdawn.com/software/video_software/dvd_tools/dvd_id... and 'identify' that disc from the log, and paste here. That's not gonna help you burn but we can verify more about the disc...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
stosh
Newbie
|
18. September 2005 @ 09:04 |
Link to this message
|
Hi creaky,
Is this the right information?:
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:RITEK-R02-001]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [Not Available]
Manufacturer Name : [Ritek Corp.]
Manufacturer ID : [RITEK]
Media Type ID : [R02]
Product Revision : [001]
Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)]
Recording Speeds : [1x-2.4x , 4x]
----------------------------------------------------------------------------
** INFO : Drive = _NEC DVD_RW ND-2510A [FW 2.18]
** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW
** INFO : Write Capabilities = DVD-R DVD-RW
** INFO : Disc = [DVD+R:RITEK-R02-001]
** INFO : Reference Speed : 1x DVD = 1385 kBps
** INFO : An Writeable Disc Is Recommended For Accurate Results
** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below
** INFO : GET PERFORMANCE Write Speed Descriptor(s)
Descriptor #1 = 5408 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 3245 kBps ( 2.40x) - [CLV/Non-Pure CAV]
** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]
** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported
Descriptor #1 = 5645 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 4234 kBps ( 3.06x) - [CLV/Non-Pure CAV]
Descriptor #3 = 3528 kBps ( 2.40x) - [CLV/Non-Pure CAV]
Descriptor #4 = 2822 kBps ( 2.04x) - [CLV/Non-Pure CAV]
Descriptor #5 = 1411 kBps ( 1.00x) - [CLV/Non-Pure CAV]
Descriptor #6 = 706 kBps ( 0.51x) - [CLV/Non-Pure CAV]
----------------------------------------------------------------------------
** INFO : Hex Dump Of 'Media Code'-Block Listed Below
** INFO : 4-Byte Header Preceding 'Media Code'-Block Discarded
** INFO : Format 11h (Method 1) - ADIP Information
0000 : a1 0f 02 00 00 03 00 00 00 26 05 3f 00 00 00 00 .........&.?....
0010 : 00 00 01 52 49 54 45 4b 00 00 00 52 30 32 01 38 ...RITEK...R02.8
0020 : 23 54 37 09 00 3c 65 00 a0 5f 14 14 0a 0a 0a 0a #T7..<e.._......
0030 : 01 19 1b 0b 0b 0e 0f 01 00 00 00 00 00 00 00 00 ................
0040 : 01 00 38 38 00 25 62 3f 05 30 22 10 08 20 1c 01 ..88.%b?.0".. ..
0050 : 00 00 00 25 62 3f 05 30 22 10 08 20 1c 01 00 00 ...%b?.0".. ....
0060 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0070 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0080 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0090 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00f0 : 00 00 00 00 00 00 00 00 ........
----------------------------------------------------------------------------
[ DVD Identifier - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------
|
Moderator
|
18. September 2005 @ 10:46 |
Link to this message
|
|
yup. i'm no Ritek expert but those look like 4x discs to me, either way i dunno why your firmware can't deal with 'em. i'll go PM gurnard, he's a Ritek man, t'would be better than me cheating and doing a google search...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
18. September 2005 @ 12:57 |
Link to this message
|
|
@ stosh hi :)
@creaky hi :)
shit comp! don't know if you got my PM so will repeat here just in case
G05 should be ok.
haven't had any experience of +R02 because i was into -R then..i believe they were the + version of the -R 4x G04
maxel ritek mxlrG02=RITEK R02
of course the 8x R03 have superceeded them.
the burn speed is a tad high for the R02 and GO4. 2.4x would be better and 4x for the GO5
hope this helps
 gif by ireland
we cant help if you wont help yourself This message has been edited since posting. Last time this message was edited on 18. September 2005 @ 13:09
|
|
stosh
Newbie
|
19. September 2005 @ 05:45 |
Link to this message
|
|
Hi creaky, gurnard
seems that we've beaten this one to death? My gut feeling is (like yours) in that thre is something with this disk and/or the way it was burned that is making it unplayable. In most cases it wouldn't be a big deal, but in this case since it is a compilation disc of rare music footage, I do.
The other strange part is that now, I can't play the disk-in-question at all - it plays like one frame at a time (really slowly). I think I'll try re-installing the Intel Application Accelerator and see if that helps.
Anyway, if you have any other ideas/suggestions, please let me know.
thanks for your help...
This message has been edited since posting. Last time this message was edited on 19. September 2005 @ 05:47
|
Moderator
|
19. September 2005 @ 09:05 |
Link to this message
|
|
have you tried copy/pasting (via windows explorer) the 'video_ts' folder to your hard drive ?, then you could reburn to a.n.other disc....
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
stosh
Newbie
|
19. September 2005 @ 10:58 |
Link to this message
|
|
yea, I have. That was one of the first things I tried. I did email the guy who sent me the dvd's and asked him what burning software he uses.
That's why I've been thinking that the problem is file related. The disk I copied the files to (copied them to the heard drive first, then to the new disk), have always worked fine for me. In fact, after I made the updates you suggested, I burned another disk hoping that whatever was odd about the original disc would be corrected by the updates and that files would be copied over and the disk would play perfectly. No suck luck - however, I do have 2 very nice cup coasters if you're interested.
:-)
|
|
Advertisement
|
|
|
Moderator
|
24. September 2005 @ 02:51 |
Link to this message
|
well i think you're gonna have to try some different discs (i'm loathe to say that though, as those Riteks aren't new so should work fine in your drive i'd have thought. tell you what, do a 'simulation burn' thus only going thru the motions with a blank disc, not creating a coaster, and paste the section of log that it produces, just to check the basics again...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
