|
|
|
[bold]Problem burning using nero 6.3[/bold]
|
|
|
pinfold
Newbie
|
15. September 2005 @ 09:50 |
Link to this message
|
|
I am having problems burning a copied dvd film to a blank dvd using nero 6.3, it reads ok but when i place the blank dvd in it starts burning ok till it goes to around 40% then it stops! I have tried different media but its the same.
|
|
Advertisement
|
|
|
|
Moderator
|
15. September 2005 @ 09:55 |
Link to this message
|
post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
pinfold
Newbie
|
15. September 2005 @ 11:07 |
Link to this message
|
|
[I]Creaky Could you explain a bit better as i am a virgin to this kind of thing on the computer!
|
Moderator
|
15. September 2005 @ 11:30 |
Link to this message
|
sorry, to help find out the cause(s) we need the LAST section of your Nero logfile, which is located as per my previous reply...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
pinfold
Newbie
|
15. September 2005 @ 11:50 |
Link to this message
|
Is this it!
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\nero\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1653S>Version: CS0K - HA 3 TA 0 - 6.6.0.16
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1653S>Version: CS0K - HA 3 TA 0 - 6.6.0.16
Adapter driver: <> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA740 DVD/CDRW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : H + H DVD-ROM DVD-41SD4.10 vcsmpdrv Port 2 ID 0 DMA: Off
CdRomPeripheral : H + H DVD-ROM DVD-41SD4.10 vcsmpdrv Port 2 ID 1 DMA: Off
CdRomPeripheral : H + H DVD-ROM DVD-41SD4.10 vcsmpdrv Port 2 ID 2 DMA: Off
=== CDRom-Device-Map ===
MATSHITA UJDA740 DVD/CDRW D: CDRom0
H + H DVD-ROM DVD-41SD CDRom1
H + H DVD-ROM DVD-41SD CDRom2
H + H DVD-ROM DVD-41SD CDRom3
LITE-ON DVDRW SOHW-1653S E: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 222MB (227824kB)
Free physical memory: 104MB (107308kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.9.2005
===== Disc-Copy over image - 1st step : Copy to image ...
13:01:08 #1 Text 0 File Reader.cpp, Line 127
Reader running
13:01:08 #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
13:01:08 #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 2288896 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
13:01:08 #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 2288896 = 2288896, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
13:01:08 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
13:01:08 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2288895 (508:38.45, 4470MB)
13:01:08 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
13:01:08 #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:01:08 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2288896 (2288896) = #2288896/508:38.46
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288896 blocks [Image Recorder]
--------------------------------------------------------------
13:01:08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4687659008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2288896 | lead-out | 1 | 0x41 | 0x00
13:01:08 #11 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
13:01:09 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
13:14:57 #13 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 2288896 (22ED00h), lenght 0 blocks
13:14:57 #14 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:15:00 #15 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
13:15:23 #1 Text 0 File Reader.cpp, Line 127
Reader running
13:15:23 #2 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1653S running
13:15:24 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4687659008
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=508:38.46 ( 2288896) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Paul Bryan\My Documents\TempImage.nrg>
13:15:24 #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
13:16:14 #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2288895 (508:38.45, 4470MB)
13:16:14 #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
13:16:14 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1653S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
13:16:14 #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
13:16:14 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2288896 (2288896) = #2288896/508:38.46
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288896 blocks [LITE-ON DVDRW SOHW-1653S]
--------------------------------------------------------------
13:16:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1653S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4687659008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2288896 | lead-out | 1 | 0x41 | 0x00
13:16:15 #11 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
13:16:15 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
13:16:15 #13 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
13:16:15 #14 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
13:16:15 #15 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
13:16:15 #16 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
13:16:47 #17 Text 0 File Cdrdrv.cpp, Line 1286
13:16:47.461 - LITE-ON DVDRW SOHW-1653S\H3 T0 : Queue again later
13:27:31 #18 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user
13:27:42 #19 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x032C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x13 0xD7 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
13:27:42 #20 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x09921400
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x13 0xD7 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
13:27:42 #21 Text 0 File Mmc.cpp, Line 19340
Writer-Buffer for LITE-ON DVDRW SOHW-1653S\H3 T0 reduced to 32768Bytes
13:27:42 #22 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x09921400
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x13 0xD7 0x80 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
13:27:42 #23 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
LITE-ON DVDRW SOHW-1653S\H3 T0
13:27:43 #24 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1300351
13:27:43 #25 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x039F4A88
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
13:27:43 #26 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x039F4A88
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
13:27:44 #27 CDR -500 File WriterStatus.cpp, Line 167
SCSI command aborted
LITE-ON DVDRW SOHW-1653S\H3 T0
13:27:44 #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
13:27:44 #29 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x039F4A88
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
13:27:44 #30 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x039F4A88
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
13:27:45 #31 CDR -500 File WriterStatus.cpp, Line 172
SCSI command aborted
LITE-ON DVDRW SOHW-1653S\H3 T0
13:27:45 #32 TRANSFER -39 File WriterStatus.cpp, Line 172
Could not perform EndSession
13:27:45 #33 Phase 39 File dlgbrnst.cpp, Line 1832
Burn process aborted
13:27:45 #34 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 03/01/2003 03:02:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
Moderator
|
15. September 2005 @ 12:44 |
Link to this message
|
@pinfold -
Quote:
Recorder: <LITE-ON DVDRW SOHW-1653S>Version: CS0K
- burner's firmware is 2 revisions out of date, CS0P is here - http://forum.rpc1.org/dl_firmware.php?download_id=2025
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
- that question mark suggests 1 of 2 things, either your device drivers aren't loaded correctly or this burner is an external burner, maybe a USB burner ??
Quote:
Physical memory : 222MB (227824kB)
Free physical memory: 104MB (107308kB)
Memory in use : 52
- wow that's bad, 256MB total memory is insufficient for XP, never mind dvd work on top. buy more memory.
Quote:
===== Disc-Copy over image - 1st step : Copy to image ...
Quote:
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2288895 (508:38.45, 4470MB)
- hmmm, that's no good, the source disc was written right to the outer edge of the disc. I saw that this disc copied to the hard drive correctly (you were lucky this time) however i would not not recommend using Nero's disc copy feature for this disc. i will explain in next paragraph
Quote:
===== Disc-Copy over image - 2nd step : Burn the image ...
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2288895 (508:38.45, 4470MB)
- because the source disc was written to edge of the disc, the destination discs has to also be written to 4470MB. not recommended. instead of using Nero's disc copy feature, use DVD Shrink to shrink the contents of the disc to a reasonable and safe size such as 4300MB. (download DVD Shrink from software section at top of page, guides for Shrink are also at top of page. Important here is to set 'target size' to 4300MB in DVD Shrink's preferences. Then to make a copy of that (as it's 'shrunk' to hard drive by then), use Nero to open a compilation type of 'dvd-video' and drag the contents of the video_ts folder (created by DVD Shrink) to left of screen in Nero and burn to blank DVD.
However you'll be lucky if even this method works properly (the burning to blank dvd section i mean) due to lack of memory.
Quote:
Recorder: LITE-ON DVDRW SOHW-1653S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
- i wonder if these discs are fakes of TY (and if so, inferior) discs ??. do you know if these are genuine TY (Taiyo Yuden) discs ??. for instance can you describe the discs ??, if they're just silver-topped with no obvious markings, paste here any letters/numbers stamped on the inner hub(s) of the disc
Quote:
Aborted by user
SCSI command aborted
Could not perform EndSession
Burn process aborted
- splat! (at least you kept to a sensible burn speed (4x)). address all the other stuff and we should get you sorted.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
pinfold
Newbie
|
15. September 2005 @ 13:33 |
Link to this message
|
|
Creaky you are a top person!! I will try your suggestions but i think your right about the memory is not big enough.
|
Moderator
|
15. September 2005 @ 13:35 |
Link to this message
|
|
no worries, pls keep me posted with progress good or bad (especially as that one took me ages to type!)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Advertisement
|
|
|
|
pinfold
Newbie
|
15. September 2005 @ 13:36 |
Link to this message
|
|
Also your right again i am using a external burner to my laptop.
|
|
