|
|
|
nero error: Could not perform EndTrack
|
|
|
gmatera
Newbie
|
17. September 2005 @ 09:39 |
Link to this message
|
|
Hi guys, can you help me? I don't know anything about hardwares and drives, so if you explain me all i have to do i would appreciate
a lot. Thanks.
It's the following log text:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero version: 6.3.1.15 (Nero Express)
Recorder: <LG CD-RW CED-8120B> Version: 1.03 - HA 1 TA 0 - 6.3.1.15
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LG DVD-ROM DRD8120B>Version: 1.04 - HA 1 TA 1 - 6.3.1.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLP AS20.5 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LG CD-RW CED-8120B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LG DVD-ROM DRD8120B atapi Port 1 ID 1 DMA: Off
DiskPeripheral : IOMEGA ZIP 100 13.A ultra Port 2 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
LG CD-RW CED-8120B E: CDRom0
LG DVD-ROM DRD8120B F: CDRom1
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261600kB)
Free physical memory: 99MB (102108kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.9.2005
CD-ROM (ISO)
14:10:39 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
14:10:39 #2 Text 0 File Reader.cpp, Line 118
Reader running
14:10:39 #3 Text 0 File Writer.cpp, Line 124
Writer LG CD-RW CED-8120B running
14:10:39 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
14:10:39 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Track-at-once, using CD-R/RW media
14:12:17 #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 357686 ( 79:31.11)
14:12:17 #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
14:12:17 #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: LG CD-RW CED-8120B;
CDR code: 00 97 28 26; OSJ entry from: Multi Media Masters && Machinary SA
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1C 1A (LI 97:28.26), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
14:12:17 #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
Compilation cannot be written on that medium type.
(Medium in drive: CD-ROM. Medium required by compilation: CD-R/RW.)
14:12:17 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 357687 (357687) = #357687/79:29.12
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 357685 blocks [LG CD-RW CED-8120B ]
--------------------------------------------------------------
14:12:17 #11 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [LG CD-RW CED-8120B ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 732850176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
357687 | lead-out | 1 | 0x00 | 0x41
14:12:17 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 357687 -> 357685.
14:12:17 #13 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
14:12:17 #14 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.
14:12:17 #15 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
14:12:17 #16 Phase 28 File dlgbrnst.cpp, Line 1845
Speed measurement started
14:12:17 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
14:13:11 #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:13:11 #19 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
14:13:11 #20 Phase 29 File dlgbrnst.cpp, Line 1796
Speed measurement completed: 92.9x (13.938 KB/s)
14:13:11 #21 Phase 32 File dlgbrnst.cpp, Line 1845
Simulation started at 12x (1.800 KB/s)
14:13:11 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
14:13:28 #23 SCSI -1066 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04E80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x23 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
14:13:28 #24 CDR -1013 File Writer.cpp, Line 304
Buffer underrun
LG CD-RW CED-8120B\H1 T0
14:13:28 #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:13:29 #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
14:13:29 #27 CDR -201 File WriterStatus.cpp, Line 154
Invalid write state
LG CD-RW CED-8120B\H1 T0
14:13:29 #28 TRANSFER -18 File WriterStatus.cpp, Line 154
Could not perform EndTrack
14:13:29 #29 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
14:13:29 #30 Phase 34 File dlgbrnst.cpp, Line 1845
Simulation failed at 12x (1.800 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 3/8/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Gmatera
|
Moderator
|
17. September 2005 @ 10:35 |
Link to this message
|
Quote:
Nero version: 6.3.1.15 (Nero Express)
- too old, update to 6.6.0.16 from here - ' http://www.nero.com/en/nero-up.php '
Quote:
Recorder: <LG CD-RW CED-8120B> Version: 1.03
- your firmware is a little out of date, however as you say say you're not au fait with hardware etc, it should keep for another day..
Quote:
DiskPeripheral : QUANTUM FIREBALLP AS20.5 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LG CD-RW CED-8120B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LG DVD-ROM DRD8120B atapi Port 1 ID 1 DMA: Off
DiskPeripheral : IOMEGA ZIP 100 13.A ultra Port 2 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID 0 DMA: Off
DMA needs to be ON, fix it via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 255MB (261600kB)
Free physical memory: 99MB (102108kB)
Memory in use : 60 %
- make sure to close down more programs prior to burning, you're running out of free memory
Quote:
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
- not sure if you're intending to do multisession discs or not ?
Quote:
Recorder: LG CD-RW CED-8120B;
CDR code: 00 97 28 26; OSJ entry from: Multi Media Masters && Machinary SA
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1C 1A (LI 97:28.26), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
- good grief, if never heard of that disc manufacturer before
Quote:
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
Compilation cannot be written on that medium type.
(Medium in drive: CD-ROM. Medium required by compilation: CD-R/RW.)
- dunno what's going on there ?...
Quote:
Buffer underrun
Invalid write state
- splat!
Quote:
Simulation failed at 12x (1.800 KB/s)
- simulation is a good idea for testing your setup without actually writing to discs.
Quote:
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 3/8/2004 22:59:44 (Adapter driver for rec)
- those question marks are saying your drivers aren't loaded correctly. Fixing DMA as described further up my reply, will sort this bit out.
Basically you need to sort out the DMA drivers, and i would update Nero too.. see how you get on and report back with progress good or bad.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 17. September 2005 @ 10:35
|
AfterDawn Addict
|
17. September 2005 @ 10:58 |
Link to this message
|
Edited.... Creaky beat me to it.
Quote:
Recorder: <LG CD-RW CED-8120B> Version: 1.03
Your LG CD burner's firmware is old, the current firmware is 2.0 - go here http://forum.rpc1.org/dl_firmware.php?download_id=533 and download the lattest 2.0 to run and it will update your burner's drive. Updating your firmware can be very useful, it will recognize more cd-r media and codes - not only that but it will increase compatibility and performances as well. (NOTE: make sure no cd is inside your drive in prior to updating.)
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLP AS20.5 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LG CD-RW CED-8120B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LG DVD-ROM DRD8120B atapi Port 1 ID 1 DMA: Off
DiskPeripheral : IOMEGA ZIP 100 13.A ultra Port 2 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID 0 DMA: Off
Your DMA is OFF, all of them needs to be ON. To enable your DMA back on (for Windows XP users).
((To enable DMA back ON by "uninstalling" it's driver ?for Win XP users?))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on +sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your dvd-rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the ?IDE ATA/ATAPI Controllers?
(A) left click on + sign of IDE ATA/ATAPI Controllers
(B) double left click on either "Primary" or "Secondary IDE Channel" (NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the next step.
(C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
NOTE: To verify your dvd burner/dvd-rom drivers with Nero:
Open up "StartSmart", click on "Nero Toolkit", then click on "Nero InfoTool" (InfoTool will run and retrieve all drivers), now click on "Configuration" - this should show you where your DVD Burner/DVD-ROM is installed under either Primary or Secondary <--- make good note of that and you're ready to "uninstall" your dvd burner/dvd-rom drivers now.
Quote:
Physical memory : 255MB (261600kB)
Free physical memory: 99MB (102108kB)
Memory in use : 60 %
This is kind of low for burnings, you need to disable some of your running programs that you don't neccessary need it, and release/free up more memory if you can (to do that, go to Start, Run, type: msconfig and enter, then STARTUP and disable any programs you don't need to run. Or "ctrl+alt+delete", Processes, and End Process any of the running programs you don't need at this time. It would be nice if you can upgrade another 256MB to it. This definitely would help out a lot.
Quote:
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04E80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x23 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
Again, your LG cd burner doesn't like the media, and or it can't recognize the media at all. An update on the firmware will solve this.
Quote:
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
Compilation cannot be written on that medium type.
(Medium in drive: CD-ROM. Medium required by compilation: CD-R/RW.)
Since you're doing a "simulation", but your drive cannot read/recognize the blank media. See above reply.
Quote:
14:13:29 #30 Phase 34 File dlgbrnst.cpp, Line 1845
Simulation failed at 12x (1.800 KB/s)
Even if it's a CD burning, try to go at least 8X, it's much safer that way.
This message has been edited since posting. Last time this message was edited on 17. September 2005 @ 11:06
|
|
Advertisement
|
|
|
Moderator
|
17. September 2005 @ 11:15 |
Link to this message
|
|
no worries buddy, your reply looks better on the page than mine :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
