|
|
|
Nero failing to verify DVD writing
|
|
|
digiD
Suspended due to non-functional email address
|
22. September 2005 @ 04:14 |
Link to this message
|
|
I suddenly developed errors in writing dvd backups. THe writer can read & write all CDs without any problems, can also read DVDs without any problem but I am getting error while verifing the written data.
What is causing this?
Need help.
Here the Log file
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <SAMSUNG DVD R/RW SH-W08A>Version: 1S30 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <IdeChnDr> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8525B >Version: 1.03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <IdeChnDr> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP4002H IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP8004H IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD R/RW SH-W08A IdeChnDr Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8525B H: CDRom0
SAMSUNG DVD R/RW SH-W08A G: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514864kB)
Free physical memory: 81MB (83044kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.9.2005
ISO compilation
1:41:56 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:41:57 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
1:41:57 PM #3 Text 0 File Writer.cpp, Line 122
Writer SAMSUNG DVD R/RW SH-W08A running
1:41:57 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:42:05 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
1:42:05 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285071 (507:47.46, 4463MB)
1:42:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
1:42:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SAMSUNG DVD R/RW SH-W08A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
1:42:05 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:42:05 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2285072 (2285072) = #2285072/507:47.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285072 blocks [SAMSUNG DVD R/RW SH-W08A]
--------------------------------------------------------------
1:42:05 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SAMSUNG DVD R/RW SH-W08A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4679827456, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285072 | lead-out | 1 | 0x41 | 0x00
1:42:06 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:43:50 PM #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
1:43:50 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:43:50 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
1:43:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:43:51 PM #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
1:43:51 PM #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
1:43:51 PM #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
1:43:51 PM #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:04:23 PM #21 Text 0 File WriterStatus.cpp, Line 116
<SAMSUNG DVD R/RW SH-W08A> start writing Lead-Out at LBA 2285072 (22DE10h), lenght 0 blocks
2:04:23 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:04:23 PM #23 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2285071
2:05:37 PM #24 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
2:05:37 PM #25 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
2:10:27 PM #26 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B690A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x06 0xC9 0x30 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x06 0xC9 0x35 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
2:10:32 PM #27 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B690A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x06 0xCE 0x40 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x06 0xCE 0x48 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
2:10:32 PM #28 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 444720 to 444735
2:10:55 PM #29 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B690A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x06 0xE2 0xF0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x06 0xE2 0xF4 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
2:10:55 PM #30 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 446016 to 446031
_______________________________________________________
The file say the same error to various sectors
______________________________________________________
2:41:10 PM #990 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 517216 to 517231
2:41:14 PM #991 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user
2:41:16 PM #992 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B690A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x07 0xE5 0x30 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x07 0xE5 0x37 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
2:41:16 PM #993 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 517344 to 517359
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 3:58:14 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 4/22/2002 12:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
digiD
Suspended due to non-functional email address
|
23. September 2005 @ 10:07 |
Link to this message
|
|
Hope someone can answer this issue, I have burned 8 DVDs with all failing to verify.
|
AfterDawn Addict
|
23. September 2005 @ 10:56 |
Link to this message
|
|
CdRomPeripheral : SAMSUNG DVD R/RW SH-W08A IdeChnDr Port 1 ID 1 DMA: Off
DMA should be on for this device
DPhysical memory : 502MB (514864kB)
Free physical memory: 81MB (83044kB)
Free up more memory:shut down Anti-vir prog?
Think you can do a simulation burn with disc in drive, but won't sacrifice disc.
|
Moderator
|
23. September 2005 @ 12:01 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
roysubs
Newbie
|
25. September 2005 @ 01:58 |
Link to this message
|
Hi, thank you for this posting, I thought it was just me that was getting this problem. Verification used to work perfectly, but I get verify errors on EVERY disc now (Nero 6.6.0.3). Whether an Intel or Microsoft update or whatever has caused this, I would like to do verification myself after the burn. How can I do this !?!?
robocopy is not really ideal ?
some kind of crc sha md5 checker and run it on the original folder on hard disk and then on the DVD ?
some other DVD-VERIFICATION tool that basically just takes as input a hard disk folder and a dvd and then compares files and verifies if the disc is ok ?
I can't really rely on Nero at the moment, as I've got reproducable proof that the verification is wrong, but please, if anynoe can advise of a good DVD Verification tool, I will turn off Nero verification and use that instead ?
Hopefully some way around this can be found, as verification failure on every DVD that I write (according to Nero) does not give me a warm-and-friendly feeling about my archived data !
Thanks/Regards,
Roy.
|
|
digiD
Suspended due to non-functional email address
|
25. September 2005 @ 08:51 |
Link to this message
|
|
Thanks for all the replies.
For some reason I cannot un-install intel application accelator, & yes I am indeed struggeling to figure out where is that option disappeared where I could switch ON the DMA. Now I know the problem.
I am going to try further & post the results.
Thanks again.
|
AfterDawn Addict
|
25. September 2005 @ 09:01 |
Link to this message
|
|
|
|
digiD
Suspended due to non-functional email address
|
25. September 2005 @ 20:58 |
Link to this message
|
Thanks for that pdf,
I had tried earlier to that, but after un-installing & rebooting it still does not show me the advance setting tabs.............seems I need to get rid of intel AA, & somehow I cant uninstall it.
I took the suggestions 1 by 1 & tried a sucessful DVD burn with verification all going right. I turned down all application, so the Ram is all available to Nero.
It finally worked......seems the ram is also an issue.
Will report back after the DMA is turned ON.
Thanks.
|
|
digiD
Suspended due to non-functional email address
|
25. September 2005 @ 21:45 |
Link to this message
|
|
I reinstalled the Intel AA & then sucessfully un-installed it, rebooted & there you go......................DMA is now available & its now ON on all devices.
Thanks you all for solving this issue.
|
|
digiD
Suspended due to non-functional email address
|
25. September 2005 @ 22:43 |
Link to this message
|
Problem still not solved
Tried doing a dvd & verification still failed, now could it be firmware isuue or bad dvd media, though I am using the same batch media past 3 months now.
This time DMA is enabled on all devices, 250 mb ram remains free, still having problems.
Here is the log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <SAMSUNG DVD R/RW SH-W08A>Version: 1S30 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8525B >Version: 1.03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP4002H atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP8004H atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD R/RW SH-W08A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8525B G: CDRom0
SAMSUNG DVD R/RW SH-W08A H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514864kB)
Free physical memory: 250MB (256388kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.9.2005
ISO compilation
11:28:19 AM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:28:20 AM #2 Text 0 File Reader.cpp, Line 127
Reader running
11:28:20 AM #3 Text 0 File Writer.cpp, Line 122
Writer SAMSUNG DVD R/RW SH-W08A running
11:28:20 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:28:29 AM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:28:30 AM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2256879 (501:31.54, 4407MB)
11:28:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
11:28:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SAMSUNG DVD R/RW SH-W08A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
11:28:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:28:30 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2256880 (2256880) = #2256880/501:31.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2256880 blocks [SAMSUNG DVD R/RW SH-W08A]
--------------------------------------------------------------
11:28:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SAMSUNG DVD R/RW SH-W08A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4622090240, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2256880 | lead-out | 1 | 0x41 | 0x00
11:28:30 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:30:58 AM #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
11:30:58 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:30:59 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
11:31:00 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:31:00 AM #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
11:31:00 AM #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
11:31:00 AM #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
11:31:00 AM #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:52:10 AM #21 Text 0 File WriterStatus.cpp, Line 116
<SAMSUNG DVD R/RW SH-W08A> start writing Lead-Out at LBA 2256880 (226FF0h), lenght 0 blocks
11:52:10 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:52:10 AM #23 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2256879
11:53:25 AM #24 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
11:53:26 AM #25 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
11:53:59 AM #26 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:01 AM #27 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x10 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:05 AM #28 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x20 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:07 AM #29 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x30 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x30 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:12 AM #30 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x40 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:14 AM #31 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x50 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x50 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:19 AM #32 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x60 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:21 AM #33 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x70 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x70 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:27 AM #34 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x80 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x80 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:32 AM #35 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x00 0xA0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0xA0 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:54:32 AM #36 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 0 to 143
11:54:35 AM #37 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x00 0xC0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0xC0 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:54:35 AM #38 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 160 to 175
11:54:36 AM #39 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x00 0xD0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0xD1 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:54:41 AM #40 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x00 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0xE0 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:54:43 AM #41 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x00 0xF0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0xF0 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:48 AM #42 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:50 AM #43 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x10 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x10 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:54:55 AM #44 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x20 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x20 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:54:58 AM #45 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x30 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x30 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:55:02 AM #46 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x40 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x40 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:55:03 AM #47 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x50 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x50 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:55:09 AM #48 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x60 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x60 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:55:11 AM #49 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x70 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x70 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:55:17 AM #50 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x80 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x80 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:55:19 AM #51 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x90 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x90 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:55:22 AM #52 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x01 0xA0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0xA0 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:55:29 AM #53 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x06
CDB Data: 0x28 0x00 0x00 0x00 0x01 0xC0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0xC0 0x0A
0x00 0x00 0x00 0x00 0x11 0x06
11:55:29 AM #54 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 192 to 431
11:55:31 AM #55 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0xE0 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:55:31 AM #56 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 448 to 463
11:55:36 AM #57 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:55:36 AM #58 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 480 to 495
11:55:41 AM #59 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x20 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:55:41 AM #60 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 512 to 527
11:55:43 AM #61 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x02 0x30 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x30 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:55:50 AM #62 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x02 0x50 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x51 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:55:50 AM #63 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 544 to 575
11:55:53 AM #64 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user
11:55:54 AM #65 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x02 0x70 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x70 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
11:55:54 AM #66 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 592 to 607
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 3:58:14 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
Moderator
|
26. September 2005 @ 02:34 |
Link to this message
|
@digiD -
Quote:
Recorder: <SAMSUNG DVD R/RW SH-W08A>Version: 1S30
- your firmware's one version behind, 1S31 is here - http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=28
Quote:
Recorder: SAMSUNG DVD R/RW SH-W08A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
- can't help you there, i don't know much about Fuji discs
Quote:
Burn process completed successfully at 8x (11,080 KB/s)
- most people recommend 4x burns for movies
Quote:
Data verification started
Sense Key: 0x03 (KEY_MEDIUM_ERROR) - many occurrences of this error
Read errors from sector 592 to 607
- that burner's not a happy bunny with something. see if updating the firmware and lowering burn speed helps...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
