|
Nero burns DVD's all day long fine, but will not burn Music or Data CD's on a brand new NEC DVD-RW.....HELP!
Is there a setting I need to change when not burning DVD's?
Here is the log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 1/21/2005 12:00:00 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <_NEC DVD_RW ND-3520AW> Version: 3.05 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <nvata> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD-ROM DDU1615 >Version: FYS1 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <nvata> HA 1
=== Scsi-Device-Map ===
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 0 ID 31 DMA: Off
CdRomPeripheral : SONY DVD-ROM DDU1615 nvata Port 1 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3520AW nvata Port 1 ID 1 DMA: Off
DiskPeripheral : ST3250823AS nvata Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD-ROM DDU1615 D: CDRom0
_NEC DVD_RW ND-3520AW E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096624kB)
Free physical memory: 1539MB (1576524kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.9.2005
CD-ROM (ISO)
2:54:22 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:54:22 PM #2 Text 0 File Burncd.cpp, Line 2948
_NEC DVD_RW ND-3520AW
Buffer underrun protection activated
2:54:22 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
2:54:22 PM #4 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3520AW running
2:54:22 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:54:22 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media
2:54:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 205258 ( 45:38.58)
2:54:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
2:54:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-3520AW;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
2:54:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:54:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 205259 (205259) = #205259/45:36.59
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 205257 blocks [_NEC DVD_RW ND-3520AW]
--------------------------------------------------------------
2:54:23 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-3520AW] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 420677632, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
205259 | lead-out | 1 | 0x41 | 0x00
2:54:23 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 205259 -> 205257.
2:54:23 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:54:23 PM #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
2:54:23 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:54:23 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7,200 KB/s)
2:54:23 PM #18 SCSI -1189 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03AF5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02
2:54:23 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:54:23 PM #20 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
2:54:31 PM #21 SCSI -1106 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0BCD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
2:54:31 PM #22 CDR -1106 File Writer.cpp, Line 311
Power calibration error
2:54:31 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:54:31 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:54:31 PM #25 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
_NEC DVD_RW ND-3520AW\H1 T1
2:54:31 PM #26 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
2:54:31 PM #27 Text 0 File Mmc.cpp, Line 16352
<_NEC DVD_RW ND-3520AW> start Close Session
2:54:31 PM #28 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04
2:54:31 PM #29 CDR -1176 File WriterStatus.cpp, Line 249
Session fixation error
2:54:31 PM #30 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
2:54:31 PM #31 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
2:54:31 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 48x (7,200 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 8/27/2005 6:57:46 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\nvata.sys': Ver=5.10.2600.0534 built by: WinDDK, size=92800 bytes, created 5/17/2005 5:45:08 PM (Adapter driver for rec)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0475 built by: WinDDK, size=86144 bytes, created 11/3/2004 1:58:20 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
- i take it the burner is external or in a USB enslosure etc, just checking
Quote:
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 0 ID 31 DMA: Off
CdRomPeripheral : SONY DVD-ROM DDU1615 nvata Port 1 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3520AW nvata Port 1 ID 1 DMA: Off
DiskPeripheral : ST3250823AS nvata Port 3 ID 0 DMA: Off
- reload your motherboard drivers to turn on DMA
Quote:
Recorder: _NEC DVD_RW ND-3520AW;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
- CMC Magnetics make some of the most evil quality DVD discs out there, so i wouldn't be surprised if these CD's are the cause of your grief. Also, apparently dvd burners have 2 lasers, one for CD's and one for DVD's. it's always possible it's faulty, but is more likely to be you just need to follow ALL the suggestions i'm making here..
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
- if following ALL suggestions doesn't work, try better quality CD's
Quote:
Power calibration error
- quote from ' http://www.nero.com/en/FAQs_Error_Messages.html#9 - '
Quote:
"9. I get a 'Power calibration error' or 'Calibration area (almost) full' error message. Why?
Power Calibration is controlled by the recorder.
Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). During the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC).
This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times.
If you receive the "Power calibration error" or "Power calibration area is (amost) full" error message, the cause will be either poor media, poor power, or a defective recorder.
Please try the following solutions:
Update the firmware of your recorder. Please check the manufacturer's website for the latest version.
Try another brand of CD-R or CD-RW media.
Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal.
Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
Send the recorder in for service."
Quote:
Invalid write state
Could not perform EndTrack
Session fixation error
- splat!, see previous comments
Quote:
Burn process failed at 48x (7,200 KB/s)
- i only ever do 16x max on CD's, maybe 24x sometimes, but i'd never do 48x, whether it's data or audio
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 25. September 2005 @ 07:13
|
