|
|
|
Error burning Dual-Layers w/ Recode --- Help Please!
|
|
|
RossoC
Newbie
|
24. September 2005 @ 23:04 |
Link to this message
|
|
Hi, first post. I've been lurking on the forums for a bit and tried searching the archives, but can't seem to come up with a solution. Still kind of a newbie at burning DVD's, so my "expertise" in this field is somewhat limited. Your help is very much appreciated!
I went through a full 25-disk pin of DL's without any problems, now recently almost every disk I try ends up an expensive coaster! I'm still able to burn single-layers with no problems. I'll still get the occasional dual-layer that completes successfully somehow. It looks like it burns through the first layer fine, and when it starts with the second, it claims there's a write error. Sometimes it wraps up the session and state's the burn was unsuccessful. Other times the whole thing freezes up and doesn't even let me eject the disc and a restart is necessary.
Here's the logfile from one of the unsuccessful attempts:
********** Nero Recode 2 **********
Version: 2.2.6.17
Project type: Copy entire DVD
Target size: DVD9 (4152290)
21:41:57 File LangStreamPatcher.cpp, Line 56
Command table patching started...
21:41:57 File LangStreamPatcher.cpp, Line 101
VTS 2 - VTS_PGCITI - PGC 1 patched!
21:41:57 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTS_PGCITI - PGC 1 patched!
21:41:57 File LangStreamPatcher.cpp, Line 101
VTS 4 - VTS_PGCITI - PGC 1 patched!
21:41:57 File LangStreamPatcher.cpp, Line 101
VTS 6 - VTS_PGCITI - PGC 1 patched!
21:41:57 File LangStreamPatcher.cpp, Line 101
VTS 6 - VTS_PGCITI - PGC 5 patched!
21:41:57 File LangStreamPatcher.cpp, Line 101
VTS 6 - VTS_PGCITI - PGC 9 patched!
21:41:57 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: PHILIPS DVD+-RW DVD8631
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\XXXXX\My Documents\Nero Recode (185717231616 bytes free)
Direct burning: false
Target media: DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: true
21:41:59 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [2 vobus] 0.28MB -> 0.28MB [R 1.00]
Video: 0.27MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Menus Vobs [1 vobus] 0.22MB -> 0.22MB [R 1.00]
Video: 0.22MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Title Vobs [1 vobus] 0.01MB -> 0.01MB [not compressable]
Video: 0.01MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 0 streams
VTS_02 Title Vobs [22 vobus] 7.33MB -> 7.33MB [R 1.00]
Video: 7.05MB, extra: 0.27MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.23MB [enabled]
Subpicture: 0 streams
VTS_03 Title Vobs [22 vobus] 7.29MB -> 7.29MB [R 1.00]
Video: 7.03MB, extra: 0.25MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.21MB [enabled]
Subpicture: 0 streams
VTS_04 Title Vobs [21 vobus] 6.98MB -> 6.98MB [R 1.00]
Video: 6.71MB, extra: 0.27MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.23MB [enabled]
Subpicture: 0 streams
VTS_05 Menus Vobs [541 vobus] 210.27MB -> 210.27MB [R 1.00]
Video: 202.43MB, extra: 7.84MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 6.68MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.11MB [enabled]
VTS_05 Title Vobs [9504 vobus] 4578.86MB -> 4578.86MB [R 1.00]
Video: 4448.68MB, extra: 130.19MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 111.62MB [enabled]
Subpicture: 0 streams
VTS_06 Title Vobs [6938 vobus] 2696.92MB -> 2696.92MB [R 1.00]
Video: 2600.73MB, extra: 96.19MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 82.64MB [enabled]
Subpicture: 0 streams
21:41:59 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
21:42:00 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD+R DL
21:42:00 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 4152393 sectors (4173824)
21:42:00 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 4152393 sectors (3844376 required)
21:42:00 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 8110.14MB (7508.55MB obtained)
21:42:00 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
21:42:00 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 0.28MB -> Expected 0.28MB -> Output 0.28MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.27MB
Pictures Modified [I 0] [P 0] [B 0]
21:42:00 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Menus Vobs
VTS_01 Menus Vobs:
Original 0.22MB -> Expected 0.22MB -> Output 0.22MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.22MB
Pictures Modified [I 0] [P 0] [B 0]
21:42:00 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 0.01MB -> Expected 0.01MB -> Output 0.01MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.01MB
Pictures Modified [I 0] [P 0] [B 0]
21:42:00 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_02 Title Vobs
VTS_02 Title Vobs:
Original 7.33MB -> Expected 7.33MB -> Output 7.33MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 22
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.25MB
Source video size = 7.07MB
Pictures Modified [I 0] [P 0] [B 0]
21:42:01 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_03 Title Vobs
VTS_03 Title Vobs:
Original 7.29MB -> Expected 7.29MB -> Output 7.29MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 22
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.25MB
Source video size = 7.03MB
Pictures Modified [I 0] [P 0] [B 0]
21:42:01 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_04 Title Vobs
VTS_04 Title Vobs:
Original 6.98MB -> Expected 6.98MB -> Output 6.98MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 21
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.28MB
Source video size = 6.71MB
Pictures Modified [I 0] [P 0] [B 0]
21:42:08 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_05 Menus Vobs
VTS_05 Menus Vobs:
Original 210.27MB -> Expected 210.27MB -> Output 210.27MB
Finished error -0.00MB
Ratio encoded = 2
Original encoded = 539
Slide encoded = 0
StillImage encoded = 0
Output extra size = 7.41MB
Source video size = 202.86MB
Pictures Modified [I 0] [P 0] [B 0]
21:42:51 File NeroRecorder.cpp, Line 593
Added extra file VTS_05_2.VOB
21:43:24 File NeroRecorder.cpp, Line 593
Added extra file VTS_05_3.VOB
21:44:02 File NeroRecorder.cpp, Line 593
Added extra file VTS_05_4.VOB
21:44:36 File NeroRecorder.cpp, Line 593
Added extra file VTS_05_5.VOB
21:44:48 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_05 Title Vobs
VTS_05 Title Vobs:
Original 4578.86MB -> Expected 4578.86MB -> Output 4578.86MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 9504
Slide encoded = 0
StillImage encoded = 0
Output extra size = 129.27MB
Source video size = 4449.59MB
Pictures Modified [I 0] [P 0] [B 0]
21:45:25 File NeroRecorder.cpp, Line 593
Added extra file VTS_06_2.VOB
21:46:00 File NeroRecorder.cpp, Line 593
Added extra file VTS_06_3.VOB
21:46:18 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_06 Title Vobs
VTS_06 Title Vobs:
Original 2696.92MB -> Expected 2696.92MB -> Output 2696.92MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 6938
Slide encoded = 0
StillImage encoded = 0
Output extra size = 95.46MB
Source video size = 2601.46MB
Pictures Modified [I 0] [P 0] [B 0]
21:46:19 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (7508.54MB)
21:46:19 File NeroRecorderBase.cpp, Line 1096
Burning 29 files with total size of 7873277952 bytes on hard disk
21:46:19 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 16b
Recorder: <PHILIPS DVD+-RW DVD8631> Version: 9D03 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ARRAY iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-252S D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046612kB)
Free physical memory: 514MB (526616kB)
Memory in use : 49
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.9.2005
NeroAPI
9:46:20 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
9:46:20 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
9:46:20 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
9:46:20 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
9:46:20 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:46:20 PM #6 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW DVD8631 running
9:46:20 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:46:20 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:46:20 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3844943 (854:25.68, 7509MB)
9:46:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
9:46:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
9:46:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:46:20 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3844944 (3844944) = #3844944/854:25.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3844944 blocks [PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
9:46:20 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7874445312, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3844944 | lead-out | 1 | 0x41 | 0x00
9:46:20 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
9:46:20 PM #16 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
9:46:20 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
9:46:20 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
9:46:20 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:46:21 PM #20 Text 0 File DVDPlusDualLayer.cpp, Line 614
L0 Data Zone Capacity set to 1991424 (1E6300h, 3889MB) -> OK, confirmed setting
9:46:21 PM #21 CDR -1205 File DVDPlusDualLayer.cpp, Line 641
Burning Layer 1
9:46:21 PM #22 Text 0 File DVDPlusDualLayer.cpp, Line 651
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
9:46:21 PM #23 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 216300 h (LBN: 1E6300 h, 3889 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %7..(d.(d......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
9:46:21 PM #24 Text 0 File DVDR.cpp, Line 5896
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
9:46:21 PM #25 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: DVD-ROM
9:46:21 PM #26 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
10:07:13 PM #27 CDR -1206 File DVDPlusDualLayer.cpp, Line 1895
Burning Layer 2
10:07:13 PM #28 Text 0 File DVDPlusDualLayer.cpp, Line 1906
Perform layer 1 to 2 jump before writing at address 1991424 (1E6300h)
10:07:42 PM #29 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x08140000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1E 0x64 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
10:07:42 PM #30 CDR -1135 File Writer.cpp, Line 311
Write error
10:07:42 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:07:42 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:08:20 PM #33 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
10:08:20 PM #34 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
10:08:20 PM #35 Text 0 File DVDR.cpp, Line 5896
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
10:08:20 PM #36 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/31/2005 3:50:25 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
22:08:25 File NeroRecorderBase.cpp, Line 906
Burn failed (3)
22:08:26 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
This message has been edited since posting. Last time this message was edited on 4. October 2005 @ 10:25
|
|
Advertisement
|
|
|
|
|
RossoC
Newbie
|
3. October 2005 @ 18:31 |
Link to this message
|
|
[Bump]--Perhaps one more try...
Yet still more errors burning Dual Layers. This is driving me nuts. Single layers still working fine. If anyone has a clue, I'd appreciate some feedback. If I could provide any more info, just let me know. Thanks!!!
|
Moderator
|
3. October 2005 @ 23:32 |
Link to this message
|
hi and welcome to the forums
Quote:
1A23-*****************************
- EDIT OUT your serial number
Quote:
Recorder: <PHILIPS DVD+-RW DVD8631> Version: 9D03
- firmware is too old, update to GD30 here - http://forum.rpc1.org/dl_firmware.php?download_id=1978
Quote:
Recording mode: unknown Recording Mode
Perform layer 1 to 2 jump before writing at address 1991424 (1E6300h)
- dual layer disks are a tad expensive for me so i haven't ventured into dual layer yet. I'll call on one of my buddies to advice (actually i think he's mentioned a few times that he hasn't found Nero to handle the layer break too well; but as i'm not into dual layer i don't pay enough attention to the threads)
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Write error
- see if the firmware update helps.
Quote:
Existing drivers:
- sorry don't use Recode either as have no need for it, so am not 100% sure if the atapi drivers should be present in this section of the logfile (if they should be present here then that could be one of your problems). as i say i'll call for backup for this one....
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
AfterDawn Addict
|
3. October 2005 @ 23:44 |
Link to this message
|
i have used the same DL media as you have, the RitekD01s, mine are performing flawlessly so far...
i would suggest using DVD Decrypter for dual layer media~ ISO-read--->ISO-write~ so far, at least for me, decrypter handles the layer break quite well and i have YET to make an expensive DL coaster~ :)
the firmware NEEDs to be up to date, that is one of the big problems for your drive to recognize this fairly new media format...keep your burning @2.4x as you have, i'm with creaky on this one, update firmware and possibly use DVD Decrypter as i mentioned above for burning onto a dvd9~ :)
good luck~ let us know how u make out~ :)
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
Moderator
|
3. October 2005 @ 23:46 |
Link to this message
|
|
cheers buddy, i half thought of you knowing about this too. cool, cheers for the info...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
3. October 2005 @ 23:54 |
Link to this message
|
only 1/2 thought of me? gee thanks~! :) j/k~ LOL
while i might not have arniebear's experience in DL, i probably have more than most :) im assuming you were going to call HIM for advice right? hehe, actually, i learned from arniebear myself in regards to DVD Decrypter for DL media~ i have not looked back since~ i got about 50 under my belt now for DL media, about 30 of the Verbs DL (*grumble grumble* as you may have noticed in the media threads i got shot down 3 times in trying to purchase them, those bastards @bestbuy) and 20 of the Ritek Ridata w/ the RitekD01 coding, these are ALMOST as good as the Verbatims :) but very close~ :)
anyways, i'm not much of a recode guy myself as i prefer using decrypter for DL, so, can't say i HAVE tried burning it w/ nero~ :) i initially started out using Shrink and setting the burn size bigger to accomodate the DVD9, but, i had problems there...that's when arniebear turned me to dvd decrypter~ :) handles layer break MUCH better~
good day to YOU buddy~
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
Moderator
|
3. October 2005 @ 23:55 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Moderator
|
3. October 2005 @ 23:58 |
Link to this message
|
|
@kivory666, yup, you guess it, was gonna call on arniebear. will keep you in mind too next time :)
yup, been following your bestbuy replies avidly. I now subscribe to virtually all media threads nearly every day along with a few other forums in an attempt to keep up with stuff...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
RossoC
Newbie
|
4. October 2005 @ 10:34 |
Link to this message
|
|
Wow, thanks so much for the feedback everyone!!! I'll try the firmware update. I had used Decrypter previously, but not since this issue started, so I'll see if that'll "handle" the layer break better.
BTW, thanks for pointing out the SN mistake, I had edited it out from the top of the logfile, but didn't notice that it comes up again further down...oops!
Thanks again! I'll keep you guys posted on any progress, in case it might ever help somebody else out facing the same issue.
|
Moderator
|
4. October 2005 @ 11:33 |
Link to this message
|
|
cheers, good or bad progress is always good, if nothing else it serves as a reference for us regulars to use..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
RossoC
Newbie
|
4. October 2005 @ 12:07 |
Link to this message
|
Well, another error. :(
I updated the firmware using the posted link. This one was decoded using Decrypter. Luckily, it didn't freeze everything up this time--it burned well into the second layer till about about 98% complete before logging a "write error." It generated the borders and reported an unsuccessful burn.
Here's the logfile:
********** Nero Recode 2 **********
Version: 2.2.6.17
Project type: Copy entire DVD
Target size: DVD9 (4152290)
12:13:01 File LangStreamPatcher.cpp, Line 56
Command table patching started...
12:13:01 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: PHILIPS DVD+-RW DVD8631
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\xxxxx\My Documents\Nero Recode (129520635904 bytes free)
Direct burning: false
Target media: DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: true
12:13:10 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [133 vobus] 21.33MB -> 21.33MB [R 1.00]
Video: 17.79MB, extra: 3.54MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch Unspecified 3.15MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.13MB [enabled]
VTS_01 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_01 Title Vobs [171 vobus] 54.74MB -> 54.74MB [R 1.00]
Video: 50.50MB, extra: 4.25MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch English 3.91MB [enabled]
Subpicture: 0 streams
VTS_02 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_02 Title Vobs [1491 vobus] 462.95MB -> 462.95MB [R 1.00]
Video: 442.33MB, extra: 20.62MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 17.70MB [enabled]
Subpicture: 0 streams
VTS_03 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_03 Title Vobs [271 vobus] 87.17MB -> 87.17MB [R 1.00]
Video: 79.92MB, extra: 7.25MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch English 6.72MB [enabled]
Subpicture: 0 streams
VTS_04 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_04 Title Vobs [285 vobus] 85.05MB -> 85.05MB [R 1.00]
Video: 78.13MB, extra: 6.92MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch English 6.37MB [enabled]
Subpicture: 0 streams
VTS_05 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_05 Title Vobs [64 vobus] 19.14MB -> 19.14MB [R 1.00]
Video: 18.23MB, extra: 0.91MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.78MB [enabled]
Subpicture: 0 streams
VTS_06 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_06 Title Vobs [294 vobus] 94.65MB -> 94.65MB [R 1.00]
Video: 87.55MB, extra: 7.10MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch English 6.53MB [enabled]
Subpicture: 0 streams
VTS_07 Menus Vobs [443 vobus] 101.13MB -> 101.13MB [R 1.00]
Video: 94.56MB, extra: 6.57MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 5.00MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.70MB [enabled]
VTS_07 Title Vobs [12204 vobus] 4193.39MB -> 4193.39MB [R 1.00]
Video: 3400.92MB, extra: 792.47MB
Audio: 3 streams
0. 0. Dolby Digital 5.1-ch English 315.40MB [enabled]
1. 1. Dolby Digital 5.1-ch French 315.39MB [enabled]
2. 2. Dolby Digital 2-ch English 134.29MB [enabled]
Subpicture: 3 streams
0. 0. English 0.98MB [enabled]
1. 1. French 1.38MB [enabled]
2. 2. Spanish 1.20MB [enabled]
VTS_08 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_08 Title Vobs [5866 vobus] 1844.96MB -> 1844.96MB [R 1.00]
Video: 1763.32MB, extra: 81.64MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 69.87MB [enabled]
Subpicture: 1 streams
0. 0. English 0.32MB [enabled]
VTS_09 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_09 Title Vobs [150 vobus] 49.55MB -> 49.55MB [R 1.00]
Video: 45.47MB, extra: 4.09MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch English 3.79MB [enabled]
Subpicture: 0 streams
VTS_10 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_10 Title Vobs [65 vobus] 19.82MB -> 19.82MB [R 1.00]
Video: 18.90MB, extra: 0.91MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.78MB [enabled]
Subpicture: 0 streams
VTS_11 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_11 Title Vobs [64 vobus] 19.83MB -> 19.83MB [R 1.00]
Video: 18.93MB, extra: 0.90MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.77MB [enabled]
Subpicture: 0 streams
VTS_12 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_12 Title Vobs [305 vobus] 94.67MB -> 94.67MB [R 1.00]
Video: 90.75MB, extra: 3.91MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 3.32MB [enabled]
Subpicture: 0 streams
VTS_13 Menus Vobs [2 vobus] 0.03MB -> 0.03MB [not compressable]
Video: 0.02MB, extra: 0.01MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_13 Title Vobs [138 vobus] 42.54MB -> 42.54MB [R 1.00]
Video: 40.53MB, extra: 2.01MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 1.74MB [enabled]
Subpicture: 0 streams
12:13:10 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
12:13:10 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD+R DL
12:13:10 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 4152353 sectors (4173824)
12:13:10 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 4152353 sectors (3682321 required)
12:13:10 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 8110.06MB (7192.03MB obtained)
12:13:10 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
12:13:14 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 21.33MB -> Expected 21.33MB -> Output 21.33MB
Finished error 0.00MB
Ratio encoded = 58
Original encoded = 75
Slide encoded = 0
StillImage encoded = 0
Output extra size = 3.52MB
Source video size = 17.81MB
Pictures Modified [I 53] [P 221] [B 130]
12:13:14 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Menus Vobs
VTS_01 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error 0.00MB
Ratio encoded = 2
Original encoded = 0
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 2] [P 9] [B 0]
12:13:19 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 54.74MB -> Expected 54.74MB -> Output 54.74MB
Finished error -0.01MB
Ratio encoded = 4
Original encoded = 167
Slide encoded = 0
StillImage encoded = 0
Output extra size = 4.39MB
Source video size = 50.35MB
Pictures Modified [I 5] [P 16] [B 0]
12:13:19 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_02 Menus Vobs
VTS_02 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:13:41 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_02 Title Vobs
VTS_02 Title Vobs:
Original 462.95MB -> Expected 462.95MB -> Output 462.95MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 1491
Slide encoded = 0
StillImage encoded = 0
Output extra size = 20.28MB
Source video size = 442.67MB
Pictures Modified [I 0] [P 0] [B 0]
12:13:42 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_03 Menus Vobs
VTS_03 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:13:43 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_03 Title Vobs
VTS_03 Title Vobs:
Original 87.17MB -> Expected 87.17MB -> Output 87.17MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 271
Slide encoded = 0
StillImage encoded = 0
Output extra size = 6.85MB
Source video size = 80.31MB
Pictures Modified [I 0] [P 0] [B 0]
12:13:44 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_04 Menus Vobs
VTS_04 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:13:45 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_04 Title Vobs
VTS_04 Title Vobs:
Original 85.05MB -> Expected 85.05MB -> Output 85.05MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 285
Slide encoded = 0
StillImage encoded = 0
Output extra size = 7.22MB
Source video size = 77.83MB
Pictures Modified [I 0] [P 0] [B 0]
12:13:46 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_05 Menus Vobs
VTS_05 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:13:46 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_05 Title Vobs
VTS_05 Title Vobs:
Original 19.14MB -> Expected 19.14MB -> Output 19.14MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 64
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.88MB
Source video size = 18.26MB
Pictures Modified [I 0] [P 0] [B 0]
12:13:47 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_06 Menus Vobs
VTS_06 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:13:48 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_06 Title Vobs
VTS_06 Title Vobs:
Original 94.65MB -> Expected 94.65MB -> Output 94.65MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 294
Slide encoded = 0
StillImage encoded = 0
Output extra size = 7.42MB
Source video size = 87.23MB
Pictures Modified [I 0] [P 0] [B 0]
12:13:52 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_07 Menus Vobs
VTS_07 Menus Vobs:
Original 101.13MB -> Expected 101.13MB -> Output 101.13MB
Finished error -0.01MB
Ratio encoded = 0
Original encoded = 443
Slide encoded = 0
StillImage encoded = 0
Output extra size = 6.14MB
Source video size = 94.99MB
Pictures Modified [I 0] [P 0] [B 0]
12:14:27 File NeroRecorder.cpp, Line 593
Added extra file VTS_07_2.VOB
12:15:03 File NeroRecorder.cpp, Line 593
Added extra file VTS_07_3.VOB
12:15:38 File NeroRecorder.cpp, Line 593
Added extra file VTS_07_4.VOB
12:16:12 File NeroRecorder.cpp, Line 593
Added extra file VTS_07_5.VOB
12:16:12 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_07 Title Vobs
VTS_07 Title Vobs:
Original 4193.39MB -> Expected 4193.39MB -> Output 4178.65MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 12204
Slide encoded = 0
StillImage encoded = 0
Output extra size = 757.09MB
Source video size = 3421.56MB
Pictures Modified [I 0] [P 0] [B 0]
12:16:13 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_08 Menus Vobs
VTS_08 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:16:52 File NeroRecorder.cpp, Line 593
Added extra file VTS_08_2.VOB
12:17:18 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_08 Title Vobs
VTS_08 Title Vobs:
Original 1844.96MB -> Expected 1844.96MB -> Output 1844.96MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 5866
Slide encoded = 0
StillImage encoded = 0
Output extra size = 80.41MB
Source video size = 1764.55MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:19 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_09 Menus Vobs
VTS_09 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:20 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_09 Title Vobs
VTS_09 Title Vobs:
Original 49.55MB -> Expected 49.55MB -> Output 49.55MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 150
Slide encoded = 0
StillImage encoded = 0
Output extra size = 3.94MB
Source video size = 45.61MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:21 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_10 Menus Vobs
VTS_10 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:21 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_10 Title Vobs
VTS_10 Title Vobs:
Original 19.82MB -> Expected 19.82MB -> Output 19.82MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 65
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.88MB
Source video size = 18.94MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:21 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_11 Menus Vobs
VTS_11 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:22 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_11 Title Vobs
VTS_11 Title Vobs:
Original 19.83MB -> Expected 19.83MB -> Output 19.83MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 64
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.88MB
Source video size = 18.95MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:22 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_12 Menus Vobs
VTS_12 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:24 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_12 Title Vobs
VTS_12 Title Vobs:
Original 94.67MB -> Expected 94.67MB -> Output 94.67MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 305
Slide encoded = 0
StillImage encoded = 0
Output extra size = 4.16MB
Source video size = 90.51MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:25 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_13 Menus Vobs
VTS_13 Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:25 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_13 Title Vobs
VTS_13 Title Vobs:
Original 42.54MB -> Expected 42.54MB -> Output 42.54MB
Finished error -14.75MB
Ratio encoded = 0
Original encoded = 138
Slide encoded = 0
StillImage encoded = 0
Output extra size = 1.88MB
Source video size = 40.66MB
Pictures Modified [I 0] [P 0] [B 0]
12:17:26 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (7177.29MB)
12:17:26 File NeroRecorderBase.cpp, Line 1096
Burning 60 files with total size of 7525931008 bytes on hard disk
12:17:26 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 16b
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ARRAY iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-252S D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046612kB)
Free physical memory: 475MB (486484kB)
Memory in use : 53
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.10.2005
NeroAPI
12:17:26 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
12:17:26 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
12:17:26 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
12:17:26 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
12:17:26 PM #5 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW DVD8631 running
12:17:26 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:17:26 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:17:26 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:17:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3675359 (816:44.59, 7178MB)
12:17:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
12:17:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
12:17:27 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:17:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3675360 (3675360) = #3675360/816:44.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3675360 blocks [PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
12:17:27 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7527137280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3675360 | lead-out | 1 | 0x41 | 0x00
12:17:27 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
12:17:27 PM #16 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
12:17:27 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
12:17:27 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
12:17:27 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:17:27 PM #20 Text 0 File DVDPlusDualLayer.cpp, Line 614
L0 Data Zone Capacity set to 1842368 (1C1CC0h, 3598MB) -> OK, confirmed setting
12:17:27 PM #21 CDR -1205 File DVDPlusDualLayer.cpp, Line 641
Burning Layer 1
12:17:27 PM #22 Text 0 File DVDPlusDualLayer.cpp, Line 651
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
12:17:27 PM #23 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 1F1CC0 h (LBN: 1C1CC0 h, 3598 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %7..(d.(d......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
12:17:27 PM #24 Text 0 File DVDR.cpp, Line 5896
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
12:17:27 PM #25 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: DVD-ROM
12:17:27 PM #26 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
12:36:49 PM #27 CDR -1206 File DVDPlusDualLayer.cpp, Line 1895
Burning Layer 2
12:36:49 PM #28 Text 0 File DVDPlusDualLayer.cpp, Line 1906
Perform layer 1 to 2 jump before writing at address 1842368 (1C1CC0h)
12:55:47 PM #29 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06FA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x37 0x4E 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
12:55:47 PM #30 CDR -1135 File Writer.cpp, Line 311
Write error
12:55:47 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:55:47 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:55:47 PM #33 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03
12:55:47 PM #34 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
12:55:47 PM #35 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
12:55:47 PM #36 Text 0 File DVDR.cpp, Line 5896
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
12:55:47 PM #37 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/31/2005 3:50:25 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
12:55:53 File NeroRecorderBase.cpp, Line 906
Burn failed (3)
12:55:53 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
|
Moderator
|
4. October 2005 @ 12:19 |
Link to this message
|
oh dear. 98% doesn't sound like a layer break issue, however without having done any dual layer stuff i'm only guessing. however i thought the gist of what the other guys were saying is that they use Decrypter to do the burning due to Nero not handling the layer break properley ??
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
4. October 2005 @ 13:50 |
Link to this message
|
As far as I know why would you want to use Recode, you do not need to compress or change the file in anyway, all you want to do is do a straight copy, either use Nero Express or Burning Rom, Recode is not needed. But my recommendation is as suggested above use Decrypter in iso read then open MDS file and do iso write.
|
|
RossoC
Newbie
|
4. October 2005 @ 14:00 |
Link to this message
|
|
Ah, understand now! I'll try out those suggestions and let you know how it goes.
The one strange thing to me though is that I got through a whole spindle just fine, and then this started. Oh well...
Thanks again!
|
|
RossoC
Newbie
|
4. October 2005 @ 22:38 |
Link to this message
|
Cr@p! Another coaster. Using DVD Shrink and burning done by Nero Express. Looks like it got through the first layer again with the write error as it switched to the second layer.
I tried using DVD Decryptor to do the write in "ISO write" mode, but couldn't figure it out. Guess I gotta do some homework. I WILL figure this out!
Anyway, here's the logfile from the Express burn...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PHILIPS DVD+-RW DVD8631 >Version: GD30 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ARRAY iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-252S D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046612kB)
Free physical memory: 475MB (486772kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.10.2005
UDF/ISO compilation
10:58:13 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
10:58:14 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
10:58:14 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:58:14 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
10:58:14 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
10:58:14 PM #6 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW DVD8631 running
10:58:14 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:58:14 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:58:14 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:58:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4118415 (915:12.15, 8043MB)
10:58:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:58:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
10:58:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:58:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4118416 (4118416) = #4118416/915:12.16
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4118416 blocks [PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
10:58:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8434515968, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4118416 | lead-out | 1 | 0x41 | 0x00
10:58:15 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:58:15 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
10:58:15 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:58:15 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
10:58:15 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:58:15 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 614
L0 Data Zone Capacity set to 2067664 (1F8CD0h, 4038MB) -> OK, confirmed setting
10:58:15 PM #22 CDR -1205 File DVDPlusDualLayer.cpp, Line 641
Burning Layer 1
10:58:15 PM #23 Text 0 File DVDPlusDualLayer.cpp, Line 651
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
10:58:15 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 228CD0 h (LBN: 1F8CD0 h, 4038 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
10:58:15 PM #25 Text 0 File DVDR.cpp, Line 5896
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
10:58:15 PM #26 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: DVD-ROM
10:58:15 PM #27 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
11:19:56 PM #28 CDR -1206 File DVDPlusDualLayer.cpp, Line 1895
Burning Layer 2
11:19:56 PM #29 Text 0 File DVDPlusDualLayer.cpp, Line 1906
Perform layer 1 to 2 jump before writing at address 2067664 (1F8CD0h)
11:20:20 PM #30 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0BE50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1F 0x91 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
11:20:20 PM #31 CDR -1135 File Writer.cpp, Line 311
Write error
11:20:20 PM #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:20:20 PM #33 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:20:20 PM #34 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03
11:20:20 PM #35 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
11:20:20 PM #36 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
11:20:20 PM #37 Text 0 File DVDR.cpp, Line 5896
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
11:20:20 PM #38 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/31/2005 3:50:25 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
4. October 2005 @ 22:49 |
Link to this message
|
as i say i don't do/understand some of this stuff yet, just not interested in dual layer at all, but this stands out to my untrained eye - Quote:
11:19:56 PM #28 CDR -1206 File DVDPlusDualLayer.cpp, Line 1895
Burning Layer 2
11:19:56 PM #29 Text 0 File DVDPlusDualLayer.cpp, Line 1906
Perform layer 1 to 2 jump before writing at address 2067664 (1F8CD0h)
11:20:20 PM #30 SCSI -1135 File Cdrdrv.cpp, Line 1434
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
11:20:20 PM #31 CDR -1135 File Writer.cpp, Line 311
Write error
- looks like layer break problem to me...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 4. October 2005 @ 22:49
|
AfterDawn Addict
|
4. October 2005 @ 23:06 |
Link to this message
|
yes, this is definitely a LAYER BREAK issue w/ Nero...while using Nero burning rom/nero express as arniebear had stated earlier is a "better bet" than using recode all together; i have had MY success as suggested by arniebear initially to do EVERYTHING with dvd decrypter~
no need to use DVD Shrink to "compress" or encode, use DVD Decrypter for the ENTIRE process...from beginning to end...
my ONLY suggestion at this point would be to NOT use Nero in any way/shape or form for the burning aspect of it~ use decrypter's OWN burning engine to do a straight forward ISO READ- ISO WRITE~ :) bam there it is~ good luck RossoC~ :)
happy burning~
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
|
Advertisement
|
|
|
AfterDawn Addict
|
5. October 2005 @ 05:55 |
Link to this message
|
I have not had good luck using Nero for dl. With using Decrypter in iso mode you are backing up the exact image, with the exact layer break there is no question of where the disks breaks at. Decrypter is not placing it anywhere else. Plus it is an easy user friendly program. Mr LUK is back in a very scaled down way, you can read about his little program that is an extension of the burning part of Decrypter here.
http://www.imgburn.com/
|
|
