|
|
|
Nero Unable to Burn to CD-R
|
|
|
xantiboix
Newbie
|
28. September 2005 @ 10:12 |
Link to this message
|
|
I'm new here so forgive me if I'm a bit off my rocker when trying to make this understandable! :)
I bought a CD-R/RW just a little over a year ago and it has been working perfect. I wasn't keen on the "good" and "bad" types of CDs you can get, but I had been using Imation and TDK and they both worked well for me... About 3 months ago I bought pack of Maxwell and just tried to burn a disc and it burns and gives the "completed" message, but it says the CD is blank and when it's put into my stero it also says it's blank. Could this just be a problem with the Maxwell brand? I'm hopping for a little help before I spend more $$ on CDs that won't work. I uninstalled my driver and program and reinstalled and it still does the same thing.
-Dustin
|
|
Advertisement
|
  |
|
|
Moderator
|
28. September 2005 @ 10:21 |
Link to this message
|
hia and welcome. pls post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
..then i or one of the other guys can help you out....
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
xantiboix
Newbie
|
28. September 2005 @ 10:28 |
Link to this message
|
Here's the log.. I think this is all.
The music I'm trying to burn was ripped from brother's CD.. it couldn't be something wrong in the ripping? That may sound stupid, but willing to try anything, LOL!
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 06/25/2002 10:34:54 AM
Nero Version: 5.5.9.14
Recorder: <CyberDrv CW099D CD-R/RW> Version: 120M - HA 0 TA 1 - 5.5.9.14
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <CyberDrv CW099D CD-R/RW> Version: 120M - HA 0 TA 1 - 5.5.9.14
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST320413A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : CyberDrv CW099D CD-R/RW atapi Port 0 ID 1 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 126MB (129584kB)
Free physical memory: 28MB (29020kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
28.9.2005
Audio CD
9:02:32 AM #1 CDADOC -1 File Cdadoc.cpp, Line 1620
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 04:20.03, Pause frames: 150, Filters: 0, Name: 'Alter Bridge - Metalingus.mp3'.
Total size: 04:22.03
9:02:32 AM #2 Phase 89 File dlgbrnst.cpp, Line 1571
Super Link activated
9:02:32 AM #3 Text 0 File Reader.cpp, Line 118
Reader running
9:02:32 AM #4 Text 0 File Writer.cpp, Line 127
Writer CyberDrv CW099D CD-R/RW running
9:02:32 AM #5 Text 0 File Burncd.cpp, Line 3588
Turn on Disc-At-Once, using CD-R/RW media
9:02:32 AM #6 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (original item values)
0: TRM_AUDIO_NOPRE (Alter Bridge - Metalingus.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 19503 (19503) = #19503/4:20.3
relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------
9:02:33 AM #7 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 19502 ( 4:22.02)
9:02:33 AM #8 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE
9:02:33 AM #9 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: CyberDrv CW099D CD-R/RW;
CDRW code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
9:02:34 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 812
Prepare recorder CyberDrv CW099D CD-R/RW for write in raw writing
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_AUDIO_ULTRARAW96, 2448/0x0, ISRC "", FilePos 0 367200 48110544
9:02:34 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (Alter Bridge - Metalingus.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 19503 (19503) = #19503/4:20.3
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 19503 blocks [CyberDrv CW099D CD-R/RW ]
--------------------------------------------------------------
9:02:34 AM #12 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 52x (7,800 KB/s)
9:02:34 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1948
Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0
9:02:34 AM #14 Text 0 File Mmc.cpp, Line 12620
StartDAO : CD-Text - On
9:02:34 AM #15 Text 0 File Mmc.cpp, Line 17168
Set BUFE: Super Link -> ON
9:03:54 AM #16 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
9:03:54 AM #17 Phase 37 File dlgbrnst.cpp, Line 1571
Burn process completed successfully at 52x (7,800 KB/s)
9:03:54 AM #18 Text 0 File Burncd.cpp, Line 4655
Buffer underrun error was avoided 2 times.
9:03:54 AM #19 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 08/29/2002 1:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
-Dustin
|
Moderator
|
28. September 2005 @ 10:56 |
Link to this message
|
Quote:
Nero Version: 5.5.9.14
- if you're only doing CD's, version 5 is fine, however the last update i remember ever using was 5.5.10.78 i think, so you are way out of date. see if you update to latest 5.5.10.x update
Quote:
Recorder: <CyberDrv CW099D CD-R/RW> Version: 120M
- your firmware is 2 revisions behind, 140M is here - http://forum.rpc1.org/dl_firmware.php?download_id=1444
Quote:
DiskPeripheral : ST320413A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : CyberDrv CW099D CD-R/RW atapi Port 0 ID 1 DMA: Off
- DMA needs to be ON. fix it via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 126MB (129584kB)
Free physical memory: 28MB (29020kB)
Memory in use : 77 %
- omg!, 126MB is barely sufficient for XP. you're gonna have to try to free up more memory prior to burns, though that'll be hard with only 128MB to start with..
Quote:
Recorder: CyberDrv CW099D CD-R/RW;
CDRW code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
- if the other recommendations don't solve the problem, try different media
Quote:
Burn process completed successfully at 52x (7,800 KB/s)
- wow, the most i do for audio is 16x, the most for data is 24x
Quote:
Buffer underrun error was avoided 2 times.
- i don't think i've ever seen buffer underrun quoted as being avoided. see if other recommendations work. if not buy more memory
Quote:
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
- see previous comment
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 28. September 2005 @ 10:56
|
|
xantiboix
Newbie
|
28. September 2005 @ 23:15 |
Link to this message
|
Thanks for your reply!
I installed the 140M, but don't know how to turn my DMA on. I went into the Device Manager and though I had did it, but the new log still say it's off. I downloaded a program to free up RAM and since I did that my PC is loading faster.
Also, do you know anywhere I can download a newer update for Nero? I was at there site and tried to get 5.5.10.56 but it wouldn't download and I searched other boards and none of the links would download...
I also changed the speed to 16x and tested and still nothing... Here's the newest log:
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 06/25/2002 10:34:54 AM
Nero Version: 5.5.9.14
Recorder: <CyberDrv CW099D CD-R/RW> Version: 140M - HA 0 TA 1 - 5.5.9.14
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <CyberDrv CW099D CD-R/RW> Version: 140M - HA 0 TA 1 - 5.5.9.14
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST320413A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : CyberDrv CW099D CD-R/RW atapi Port 0 ID 1 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 126MB (129584kB)
Free physical memory: 56MB (57468kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
29.9.2005
Audio CD
12:41:37 AM #1 CDADOC -1 File Cdadoc.cpp, Line 1620
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 03:31.44, Pause frames: 150, Filters: 0, Name: 'The Weekend - 80's Rockstar.mp3'.
Total size: 03:33.44
12:41:37 AM #2 Phase 89 File dlgbrnst.cpp, Line 1571
Super Link activated
12:41:38 AM #3 Text 0 File Reader.cpp, Line 118
Reader running
12:41:38 AM #4 Text 0 File Burncd.cpp, Line 3588
Turn on Disc-At-Once, using CD-R/RW media
12:41:38 AM #5 Text 0 File Writer.cpp, Line 127
Writer CyberDrv CW099D CD-R/RW running
12:41:38 AM #6 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (original item values)
0: TRM_AUDIO_NOPRE (The Weekend - 80's Rockstar.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 15869 (15869) = #15869/3:31.44
relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------
12:41:38 AM #7 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 15868 ( 3:33.43)
12:41:38 AM #8 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE
12:41:38 AM #9 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: CyberDrv CW099D CD-R/RW;
CDRW code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
12:41:38 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 812
Prepare recorder CyberDrv CW099D CD-R/RW for write in raw writing
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_AUDIO_ULTRARAW96, 2448/0x0, ISRC "", FilePos 0 367200 39214512
12:41:38 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (The Weekend - 80's Rockstar.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 15869 (15869) = #15869/3:31.44
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 15869 blocks [CyberDrv CW099D CD-R/RW ]
--------------------------------------------------------------
12:41:38 AM #12 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 16x (2,400 KB/s)
12:41:39 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1948
Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0
12:41:39 AM #14 Text 0 File Mmc.cpp, Line 12620
StartDAO : CD-Text - On
12:41:39 AM #15 Text 0 File Mmc.cpp, Line 17168
Set BUFE: Super Link -> ON
12:42:34 AM #16 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
12:42:34 AM #17 Phase 37 File dlgbrnst.cpp, Line 1571
Burn process completed successfully at 16x (2,400 KB/s)
12:42:34 AM #18 Text 0 File Burncd.cpp, Line 4655
Buffer underrun error was avoided 3 times.
12:42:34 AM #19 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 08/29/2002 1:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
-Dustin
|
|
Advertisement
|
|
|
Moderator
|
29. September 2005 @ 00:04 |
Link to this message
|
Quote:
I installed the 140M, but don't know how to turn my DMA on
- try this way, but be very careful with regedit.... Quote:
Run REGEDIT. Go to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}
It has subkeys like 0000, 0001, 0002, etc. Normally 0001 is the primary IDE channel, 0002 the secondary, but other numbers can occur under certain circumstances. You have to go through these subkeys and check the DriverDesc value until you find the proper IDE channel.
Delete MasterIdDataChecksum or SlaveIdDataChecksum, depending on whether the device in question is attached as master or slave, but it can't actually hurt to delete both. Reboot. The drive DMA capabilities will be redetected.
Open Device Manager again and check whether the device is now actually using DMA mode. If so, congratulations, you've made it (at least until the next time Windows disables DMA).
Quote:
I downloaded a program to free up RAM and since I did that my PC is loading faster.
- oh no, which program is this, some of these programs are bad news
Quote:
Also, do you know anywhere I can download a newer update for Nero? I was at there site and tried to get 5.5.10.56 but it wouldn't download and I searched other boards and none of the links would download...
- 5.5.10.42 is here - http://www.oldversion.com/program.php?n=nero
Quote:
Physical memory : 126MB (129584kB)
Free physical memory: 56MB (57468kB)
Memory in use : 55 %
- as i said before, - omg!, 126MB is barely sufficient for XP. you're gonna have to try to free up more memory prior to burns, though that'll be hard with only 128MB to start with..
Quote:
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
- see if other recommendations work. if not buy more memory
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
