|
|
|
''Could not perform Fixation'' error!!
|
|
|
_Sonic_
Suspended due to non-functional email address
|
28. September 2005 @ 16:41 |
Link to this message
|
|
Hi, I'm using Nero 6.6.0.16 and when I try to make a MP3 cd I get this error saying that Fixation cannot be performed... why do I get this and how do I solve it?
I'll never look back,
I've got no regrets,
'Cause time doesn't wait for me,
I choose to go my own way
|
|
Advertisement
|
|
|
|
Moderator
|
28. September 2005 @ 18:04 |
Link to this message
|
pls post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
scuzz0
Newbie
|
9. October 2005 @ 07:56 |
Link to this message
|
Here si tyhe history of my last burn, it is driving me carzy it stupid. Anyways im gunna buy DVD-RW eventually but only if i know this wont occur on that. Still can some one help me out with this current problem
thank you
log
16:40:31 #11 Phase 24 File dlgbrnst.cpp, Line 1436
Caching of files started
16:40:31 #12 Phase 25 File dlgbrnst.cpp, Line 1436
Caching of files completed
16:40:31 #13 Phase 36 File dlgbrnst.cpp, Line 1436
Burn process started at 10x (1,500 KB/s)
16:40:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
16:40:31 #15 Text 0 File Mmc.cpp, Line 14476
Set BUFE: Super Link -> ON
16:42:11 #16 SCSI -1064 File Cdrdrv.cpp, Line 1390
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03A11078
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x8B 0x23 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02
16:42:11 #17 mmc -1064 File Writer.cpp, Line 316
Invalid block address
16:42:11 #18 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
16:42:20 #19 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
16:42:20 #20 CDR -201 File WriterStatus.cpp, Line 184
Invalid writestate
16:42:20 #21 TRANSFER -18 File WriterStatus.cpp, Line 184
Could not perform EndTrack
16:42:20 #22 SCSI -1176 File Cdrdrv.cpp, Line 1186
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
16:42:20 #23 mmc -1176 File WriterStatus.cpp, Line 223
Session fixation error
16:42:20 #24 TRANSFER -19 File WriterStatus.cpp, Line 223
Could not perform Fixation
16:42:20 #25 Text 0 File WriterStatus.cpp, Line 232
falling back to disc fixation
16:42:20 #26 SCSI -1176 File Cdrdrv.cpp, Line 1186
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
16:42:20 #27 mmc -1176 File WriterStatus.cpp, Line 223
Session fixation error
16:42:20 #28 TRANSFER -19 File WriterStatus.cpp, Line 223
Could not perform Fixation
16:42:20 #29 Phase 38 File dlgbrnst.cpp, Line 1436
Burn process failed at 10x (1,500 KB/s)
16:42:20 #30 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 19/10/2001 11:56:26
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 25/09/2005 20:45:20
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 25/09/2005 20:45:20
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 08/10/2005 15:02:32
File 'IoSubsys\CDUDF.VXD': Ver=5.10 (115), size=136969 bytes, created 14/09/2001 11:36:26
File 'IoSubsys\CDUDFRW.VXD': Ver=5.10 (115), size=173303 bytes, created 14/09/2001 11:37:24
File 'IoSubsys\CDRPWD.VXD': Ver=5.10 (115), size=76287 bytes, created 14/09/2001 11:38:12
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
====== *** Nero-Burning Rom, History File *** ======
stupid copier
|
Moderator
|
9. October 2005 @ 08:01 |
Link to this message
|
|
hi, you're missing the first bit up to that section you posted. the way to tell the start of a section is to look for this "====== *** NeroAPI, History File *** ====== "
i'll work with what i've got for now..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
scuzz0
Newbie
|
9. October 2005 @ 08:05 |
Link to this message
|
|
Sorry about that this help is greatly appreciated --
====== *** Nero-Burning Rom, History File *** ======
na
na
1502-1000-****-****-****-****
Windows 98 4.90 (ME)
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
Nero Version: 5.5.6.0
Recorder: <BTC BCE2410IM> Version: A.23 - HA 0 TA 1 - 5.5.6.0
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
CD-ROM: < LG CD-ROM CRD-8322B>Version: 1.05 - HA 0 TA 0 - 5.5.6.0
Adapter driver: <ESDI_506> HA 0
LG CD-ROM CRD-8322B (Target 0, E:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
BTC BCE2410IM (Target 1, F:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 28311552 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 191MB (196020kB)
Free physical memory: 0MB (208kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: On
CD-ROM (ISO)
8.10.2005
13:55:35 #1 Phase 89 File dlgbrnst.cpp, Line 1436
Super Link activated
13:55:36 #2 Text 0 File Reader.cpp, Line 117
Reader running
13:55:36 #3 Text 0 File Writer.cpp, Line 122
Writer BCE2410IM running
13:55:36 #4 ISO9660GEN -11 File geniso.cpp, Line 4306
First writeable address = 0 (0x00000000)
13:55:36 #5 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 339437 (339437) = #339437/75:25.62
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
13:55:38 #6 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 339439 (75:27.64)
13:55:39 #7 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder: BTC BCE2410IM;
CDR code: 00 97 17 06; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
13:55:41 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder BCE2410IM for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 695474176
13:55:41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
13:55:41 #10 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 339437 (339437) = #339437/75:25.62
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 339435 blocks [BCE2410IM ]
--------------------------------------------------------------
13:55:41 #11 Phase 24 File dlgbrnst.cpp, Line 1436
Caching of files started
13:55:41 #12 Phase 25 File dlgbrnst.cpp, Line 1436
Caching of files completed
13:55:41 #13 Phase 36 File dlgbrnst.cpp, Line 1436
Burn process started at 24x (3,600 KB/s)
13:55:41 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
13:55:41 #15 Text 0 File Mmc.cpp, Line 14476
Set BUFE: Super Link -> ON
13:57:41 #16 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 00 02 6C 00 00 1F 00 00 00
13:57:41 #17 CDR -1175 File Cdrdrv.cpp, Line 1304
Internal trace
Command timeout occured: timeout 90000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
13:57:41 #18 SCSI -26 File Cdrdrv.cpp, Line 1335
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0397E110
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
13:57:41 #19 SCSI -26 File Cdrdrv.cpp, Line 1390
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0397E110
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
13:57:41 #20 CDR -26 File Writer.cpp, Line 316
SCSI/ATAPI command timeout error
13:57:42 #21 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
13:57:46 #22 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
13:57:56 #23 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 10000ms, CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
13:57:56 #24 SCSI -1000 File Cdrdrv.cpp, Line 1186
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
13:57:56 #25 CDR -1175 File Cdrdrv.cpp, Line 1202
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
13:57:56 #26 SCSI -26 File Cdrdrv.cpp, Line 1230
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
13:59:12 #27 CDR -1000 File WriterStatus.cpp, Line 181
SCSI/IDE error
13:59:12 #28 TRANSFER -18 File WriterStatus.cpp, Line 181
Could not perform EndTrack
13:59:12 #29 CDR -201 File WriterStatus.cpp, Line 184
Invalid writestate
13:59:12 #30 TRANSFER -18 File WriterStatus.cpp, Line 184
Could not perform EndTrack
13:59:12 #31 SCSI -1176 File Cdrdrv.cpp, Line 1186
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
13:59:12 #32 mmc -1176 File WriterStatus.cpp, Line 223
Session fixation error
13:59:12 #33 TRANSFER -19 File WriterStatus.cpp, Line 223
Could not perform Fixation
13:59:12 #34 Text 0 File WriterStatus.cpp, Line 232
falling back to disc fixation
13:59:12 #35 SCSI -1176 File Cdrdrv.cpp, Line 1186
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
13:59:12 #36 mmc -1176 File WriterStatus.cpp, Line 223
Session fixation error
13:59:12 #37 TRANSFER -19 File WriterStatus.cpp, Line 223
Could not perform Fixation
13:59:12 #38 Phase 38 File dlgbrnst.cpp, Line 1436
Burn process failed at 24x (3,600 KB/s)
13:59:12 #39 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 19/10/2001 11:56:26
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 25/09/2005 20:45:20
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 25/09/2005 20:45:20
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 25/09/2005 20:45:20
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
====== *** Nero-Burning Rom, History File *** ======
na
na
1502-1000-0125-0591-3952-5380
Windows 98 4.90 (ME)
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
Nero Version: 5.5.6.0
Recorder: <BTC BCE2410IM> Version: A.23 - HA 0 TA 1 - 5.5.6.0
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
CD-ROM: < LG CD-ROM CRD-8322B>Version: 1.05 - HA 0 TA 0 - 5.5.6.0
Adapter driver: <ESDI_506> HA 0
LG CD-ROM CRD-8322B (Target 0, E:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
BTC BCE2410IM (Target 1, F:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 28311552 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 191MB (196020kB)
Free physical memory: 0MB (320kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: On
CD-ROM (ISO)
9.10.2005
16:40:24 #1 Phase 89 File dlgbrnst.cpp, Line 1436
Super Link activated
16:40:25 #2 Text 0 File Reader.cpp, Line 117
Reader running
16:40:25 #3 Text 0 File Writer.cpp, Line 122
Writer BCE2410IM running
16:40:25 #4 ISO9660GEN -11 File geniso.cpp, Line 4306
First writeable address = 0 (0x00000000)
16:40:27 #5 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 335977 (335977) = #335977/74:39.52
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
16:40:28 #6 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 335979 (74:41.54)
16:40:29 #7 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder: BTC BCE2410IM;
CDR code: 00 97 17 06; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
16:40:31 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder BCE2410IM for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 688388096
16:40:31 #9 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
16:40:31 #10 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 335977 (335977) = #335977/74:39.52
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 335975 blocks [BCE2410IM ]
--------------------------------------------------------------
16:40:31 #11 Phase 24 File dlgbrnst.cpp, Line 1436
Caching of files started
16:40:31 #12 Phase 25 File dlgbrnst.cpp, Line 1436
Caching of files completed
16:40:31 #13 Phase 36 File dlgbrnst.cpp, Line 1436
Burn process started at 10x (1,500 KB/s)
16:40:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
16:40:31 #15 Text 0 File Mmc.cpp, Line 14476
Set BUFE: Super Link -> ON
16:42:11 #16 SCSI -1064 File Cdrdrv.cpp, Line 1390
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03A11078
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x8B 0x23 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02
16:42:11 #17 mmc -1064 File Writer.cpp, Line 316
Invalid block address
16:42:11 #18 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
16:42:20 #19 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
16:42:20 #20 CDR -201 File WriterStatus.cpp, Line 184
Invalid writestate
16:42:20 #21 TRANSFER -18 File WriterStatus.cpp, Line 184
Could not perform EndTrack
16:42:20 #22 SCSI -1176 File Cdrdrv.cpp, Line 1186
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
16:42:20 #23 mmc -1176 File WriterStatus.cpp, Line 223
Session fixation error
16:42:20 #24 TRANSFER -19 File WriterStatus.cpp, Line 223
Could not perform Fixation
16:42:20 #25 Text 0 File WriterStatus.cpp, Line 232
falling back to disc fixation
16:42:20 #26 SCSI -1176 File Cdrdrv.cpp, Line 1186
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
16:42:20 #27 mmc -1176 File WriterStatus.cpp, Line 223
Session fixation error
16:42:20 #28 TRANSFER -19 File WriterStatus.cpp, Line 223
Could not perform Fixation
16:42:20 #29 Phase 38 File dlgbrnst.cpp, Line 1436
Burn process failed at 10x (1,500 KB/s)
16:42:20 #30 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 19/10/2001 11:56:26
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 25/09/2005 20:45:20
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 25/09/2005 20:45:20
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 08/10/2005 15:02:32
File 'IoSubsys\CDUDF.VXD': Ver=5.10 (115), size=136969 bytes, created 14/09/2001 11:36:26
File 'IoSubsys\CDUDFRW.VXD': Ver=5.10 (115), size=173303 bytes, created 14/09/2001 11:37:24
File 'IoSubsys\CDRPWD.VXD': Ver=5.10 (115), size=76287 bytes, created 14/09/2001 11:38:12
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
====== *** Nero-Burning Rom, History File *** ======
stupid copier
This message has been edited since posting. Last time this message was edited on 9. October 2005 @ 08:23
|
Moderator
|
9. October 2005 @ 08:08 |
Link to this message
|
|
no worries.
oops, because you've now posted more than one logfile section your serial number has crept in one or more times. edit them out via the pencil icon at top right of post, i have enough to go on now i think
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
scuzz0
Newbie
|
9. October 2005 @ 08:19 |
Link to this message
|
|
lol though id only got thought it looked a bit big ill get rid cheers for letting me know
stupid copier
|
Moderator
|
9. October 2005 @ 08:19 |
Link to this message
|
Quote:
Nero Version: 5.5.6.0
- that's way too old, update (free) to 5.5.10.56 - i think it's the last 5.x update they released - http://www.softpedia.com/progDownload/Nero-Burning-Rom-Download-5...
Quote:
Recorder: <BTC BCE2410IM> Version: A.23
- firmware is up to date
Quote:
LG CD-ROM CRD-8322B (Target 0, E:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
BTC BCE2410IM (Target 1, F:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
- DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 191MB (196020kB)
Free physical memory: 0MB (208kB)
Memory in use : 80 %
- there's one of your problems, you need to free up more memory by closing more programs prior to all burns
Quote:
Recorder: BTC BCE2410IM;
CDR code: 00 97 17 06; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
- CD burning is usually very forgiving but i don't like the look of the 'CD manufacturer unknown'. try better media
Quote:
SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 00 02 6C 00 00 1F 00 00 00
Internal trace
Command timeout occured: timeout 90000ms, counter 1
Sense Key: 0x00 (KEY_NO_SENSE)
SCSI/ATAPI command timeout error
SCSI/IDE error
Could not perform EndTrack
Invalid writestate
Session fixation error
- see if ALL the other suggestions make a difference
Quote:
Sense Key: 0x00 (KEY_NO_SENSE)
- sorry, i had to quote that again just for comedy value, it's a classic error!
Quote:
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
- you have no free memory left, see comments above
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
scuzz0
Newbie
|
9. October 2005 @ 08:24 |
Link to this message
|
|
Thank you im gunna try them now ill keep you updated
stupid copier
|
|
scuzz0
Newbie
|
9. October 2005 @ 09:22 |
Link to this message
|
Heres my latest log it failed i did what u suggested, i struggled a little with the dma bit i can find DMA controller which i enabled both of them but cnt find a dma channel. The info u gave me was an xp and im on me. I still know how to access the device manager though ne ways ehre the latest log
na
na
Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
Nero Version: 5.5.10.56
Recorder: <BTC BCE2410IM> Version: A.23 - HA 0 TA 1 - 5.5.10.56
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < LG CD-ROM CRD-8322B>Version: 1.05 - HA 0 TA 0 - 5.5.10.56
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
LG CD-ROM CRD-8322B (Target 0, E:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
BTC BCE2410IM (Target 1, F:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 32505856 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 191MB (196020kB)
Free physical memory: 51MB (52684kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
9.10.2005
CD-ROM (ISO)
18:10:00 #1 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
18:10:01 #2 Phase 89 File dlgbrnst.cpp, Line 1655
Super Link activated
18:10:01 #3 Text 0 File Reader.cpp, Line 115
Reader running
18:10:01 #4 Text 0 File Writer.cpp, Line 125
Writer BTC BCE2410IM running
18:10:01 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
18:10:02 #6 Text 0 File Burncd.cpp, Line 3773
Turn on Track-At-Once, using CD-R/RW media
18:10:02 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 339033 (339033) = #339033/75:20.33
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
18:10:02 #8 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 339032 (75:22.32)
18:10:02 #9 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE
18:10:02 #10 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: BTC BCE2410IM;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
18:10:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder BTC BCE2410IM for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 694646784
18:10:02 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
18:10:02 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 339033 (339033) = #339033/75:20.33
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 339031 blocks [BTC BCE2410IM ]
--------------------------------------------------------------
18:10:02 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
18:10:02 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
18:10:02 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 20x (3,000 KB/s)
18:10:02 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
18:10:02 #18 Text 0 File Mmc.cpp, Line 19546
Set BUFE: Super Link -> ON
18:12:01 #19 Text 0 File Scsicmd.cpp, Line 2085
SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 00 02 6C 00 00 1F 00 00 00
18:12:01 #20 CDR -1175 File Cdrdrv.cpp, Line 1361
Internal trace
Command timeout occured: timeout 90000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
18:12:01 #21 SCSI -26 File Cdrdrv.cpp, Line 1392
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03CB0000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
18:12:01 #22 SCSI -26 File Cdrdrv.cpp, Line 1447
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03CB0000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
18:12:01 #23 CDR -26 File Writer.cpp, Line 333
SCSI/ATAPI command timeout error
18:12:01 #24 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
18:12:02 #25 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
18:12:12 #26 Text 0 File Scsicmd.cpp, Line 2085
SCSI timeout (2), 10000ms, CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
18:12:12 #27 SCSI -1000 File Cdrdrv.cpp, Line 1243
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
18:12:12 #28 CDR -1175 File Cdrdrv.cpp, Line 1259
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
18:12:12 #29 SCSI -26 File Cdrdrv.cpp, Line 1287
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
18:13:31 #30 CDR -1000 File WriterStatus.cpp, Line 191
SCSI/IDE error
18:13:31 #31 TRANSFER -18 File WriterStatus.cpp, Line 191
Could not perform EndTrack
18:13:31 #32 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state
18:13:31 #33 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack
18:13:31 #34 Text 0 File Mmc.cpp, Line 14537
<BTC BCE2410IM > start Close Session
18:13:31 #35 SCSI -1176 File Cdrdrv.cpp, Line 1243
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
18:13:31 #36 MMC -1176 File WriterStatus.cpp, Line 233
Session fixation error
18:13:31 #37 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation
18:13:31 #38 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation
18:13:31 #39 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 20x (3,000 KB/s)
18:13:31 #40 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 11:55:38
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 25/09/2005 20:45:20
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 25/09/2005 20:45:20
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 08/10/2005 15:02:32
File 'IoSubsys\CDUDF.VXD': Ver=5.10 (115), size=136969 bytes, created 14/09/2001 11:36:26
File 'IoSubsys\CDUDFRW.VXD': Ver=5.10 (115), size=173303 bytes, created 14/09/2001 11:37:24
File 'IoSubsys\CDRPWD.VXD': Ver=5.10 (115), size=76287 bytes, created 14/09/2001 11:38:12
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
Registry Keys:
====== *** Nero-Burning Rom, History File *** ======
stupid copier
|
Moderator
|
9. October 2005 @ 10:22 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
scuzz0
Newbie
|
9. October 2005 @ 10:39 |
Link to this message
|
|
i enabled dma and still mad no difference dont matter ill buy a new drive and hope for the best thanx for all your help its greatly appreciated
stupid copier
|
|
Advertisement
|
|
|
Moderator
|
9. October 2005 @ 10:45 |
Link to this message
|
|
that'll probably sort it!, but just keep an eye on that memory...
no worries, you're welcome..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
