|
My error log is as follows:
1A20-030E-0300-1349-1215-9547
1A23-0609-4030-2333-6402-0097
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US01 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ELBY DVD-ROM >Version: 1.0 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <ElbyVCD> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 0 ID 0 DMA: Off
DiskPeripheral : HITACHI_DK23EA-30 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 2 ID 0 DMA: On
=== CDRom-Device-Map ===
ELBY DVD-ROM F: CDRom1
TOSHIBA DVD-ROM SD-R2312 D: CDRom0
TSSTcorp CD/DVDW TS-H552U E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 702MB (719856kB)
Free physical memory: 292MB (299820kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.10.2005
Burn DVD Image
20:03:11 #1 Text 0 File Reader.cpp, Line 127
Reader running
20:03:11 #2 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
20:03:11 #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
20:03:11 #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2294303 (509:50.53, 4481MB)
20:03:11 #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
20:03:12 #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
20:03:12 #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:03:12 #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2294304 (2294304) = #2294304/509:50.54
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294304 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
20:03:12 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4698734592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2294304 | lead-out | 1 | 0x41 | 0x00
20:03:12 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
20:03:12 #11 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
20:03:12 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
20:03:12 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
20:03:12 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
20:03:12 #15 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
20:03:12 #16 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
20:03:12 #17 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
20:03:12 #18 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:03:37 #19 Text 0 File Cdrdrv.cpp, Line 1286
20:03:37.318 - TSSTcorp CD/DVDW TS-H552U\H3 T0 : Queue again later
20:03:38 #20 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x07560000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
20:03:43 #21 SCSI -1114 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0CD61400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00
20:03:43 #22 CDR -1114 File Writer.cpp, Line 311
Reset occurred
20:03:43 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:03:43 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
20:03:43 #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 607
20:03:58 #26 CDR -1033 File WriterStatus.cpp, Line 167
Drive not ready
TSSTcorp CD/DVDW TS-H552U\H3 T0
20:03:58 #27 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
20:03:58 #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ElbyVCD.sys': Ver=4, 2, 0, 0, size=22016 bytes, created 28/11/2002 11:43:49 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
