|
|
|
Newbie here need help with Nero
|
|
|
Gurl588
Suspended due to non-functional email address
|
1. October 2005 @ 12:46 |
Link to this message
|
|
Ok I'm new here and i desperately need help with Nero. I don't know much about Nero but so far i never had problems burning dvds with Nero but all of a sudden today i couldn't burn my mom's movie for her. It says could not perform end of disc and i wasted so many dvd-r trying to burn. Please somebody help if u can and thank you very much. Here's a copy of the log.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/20/2003 8:26:59 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.10 (Nero Express)
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05 - HA 1 TA 1 - 6.3.1.10
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DTS5 - HA 1 TA 0 - 6.3.1.10
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800EB-11DJF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
JLMS XJ-HD166S D: CDRom0
_NEC DVD_RW ND-1300A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 247MB (253424kB)
Free physical memory: 53MB (54376kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.10.2005
UDF/ISO compilation
1:03:35 PM #1 Phase 112 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation started
1:03:35 PM #2 Phase 114 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation completed (no file modified)
1:03:36 PM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:03:36 PM #4 Phase 111 File dlgbrnst.cpp, Line 1841
DVD-Video files sorted
1:03:36 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
1:03:36 PM #6 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-1300A running
1:03:36 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
1:03:36 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
1:03:37 PM #9 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
1:03:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
1:03:37 PM #11 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
1:03:37 PM #12 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
1:03:37 PM #13 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:03:37 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [_NEC DVD_RW ND-1300A ]
--------------------------------------------------------------
1:03:37 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [_NEC DVD_RW ND-1300A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41
1:03:38 PM #16 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
1:03:38 PM #17 Text 0 File Burncd.cpp, Line 4210
Cache writing successful.
1:03:38 PM #18 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
1:03:38 PM #19 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 2.4x (3,312 KB/s)
1:03:38 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:03:38 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1185
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03466000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
1:03:38 PM #22 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes
1:04:22 PM #23 SCSI -1093 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04AC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x11 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
1:04:22 PM #24 CDR -1093 File Writer.cpp, Line 304
No seek complete
1:04:22 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:04:22 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
1:04:22 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1185
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
1:04:22 PM #28 SCSI -1176 File Cdrdrv.cpp, Line 1185
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
1:04:22 PM #29 Phase 127 File dlgbrnst.cpp, Line 1841
Generating DVD high compatibility borders
1:04:22 PM #30 CDR -1135 File WriterStatus.cpp, Line 164
Write error
_NEC DVD_RW ND-1300A\H1 T1
1:04:22 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
1:04:22 PM #32 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 2.4x (3,312 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 12/17/2002 12:32:46 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/20/2003 8:26:58 PM
File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 9:24:08 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Moderator
|
1. October 2005 @ 14:29 |
Link to this message
|
hi, and welcome to the forum...
Quote:
Nero version: 6.3.1.10 (Nero Express)
- too old, update to latest, 6.6.0.16
Quote:
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05
- wow, that firmware is out of the bible, 1.0C is here (you're 7 versions behind!) - http://forum.rpc1.org/dl_firmware.php?download_id=1517
Quote:
DiskPeripheral : WDC WD800EB-11DJF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: Off
- DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 247MB (253424kB)
Free physical memory: 53MB (54376kB)
Memory in use : 78 %
- 256MB is barely sufficient for XP, never mind DVD work on top. 512MB is what i consider the minimum for DVD work
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
- you're burnignto outer edge of discs. If you use DVD Shrink, set target size in Shrink's preferences to 4300MB, avoiding outer edge of discs and not sacrificing much space
Quote:
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
- your firmware is out of date, thus not recognising your media. update the firmware. this is an example of what you see when firmware's up to date, this kind of 3liner - Quote:
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
No seek complete
Write error
Burn process failed at 2.4x (3,312 KB/s)
- see previous comments
Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 12/17/2002 12:32:46 PM
- that's Roxio, which doesn't play well with Nero, uninstall it. To eradicate it completely You may have to google search for Roxio Zapper
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 1. October 2005 @ 14:29
|
|
Gurl588
Suspended due to non-functional email address
|
2. October 2005 @ 20:11 |
Link to this message
|
|
Oh my god creaky you are like the best. hehe. Thank u very much for your help. After following your suggestions, it works now. Now i just need better memory like u suggested 512 mb. I'm so stupid when it comes to computers so i need to ask someone how to do that. But once again, thank you very much.
|
Moderator
|
2. October 2005 @ 22:38 |
Link to this message
|
|
no worries, glad it helped. as to adding memory, it's simply a case of finding out what sort of memory you already have and how that 256MB is made up, ie if it's 2x 128MB or a single 256MB stick, have you got enough spare memory slots to add the other 256MB or do you need to take out what you have (amd sell it) and replace with a 512MB stick or 2x 256MB sticks etc etc.... we can look at that sometime if you like
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Gurl588
Suspended due to non-functional email address
|
3. October 2005 @ 20:43 |
Link to this message
|
Hi Creaky, guess what my Nero stopped working again. I'm wondering if it's Nero or the computer since now my DVD Shrink is running really slow too. And sometimes DVD Decrypter just closes by itself when i'm decrypting. Ok back to Nero, it will burn to 100 percent but then it would say burn failed and etc. Do u think it has to do with the memory but it was never a problem before? Could u pls offer any advice? Thanks a lot. Here's the log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/20/2003 8:26:59 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DTS5 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800EB-11DJF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS XJ-HD166S D: CDRom0
_NEC DVD_RW ND-1300A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 247MB (253424kB)
Free physical memory: 53MB (54432kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.10.2005
DVD-Copy on the fly
9:14:44 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
9:14:44 PM #2 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
9:14:44 PM #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x04 Start 0 Len 2017824 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
9:14:44 PM #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 2017824 = 2017824, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
9:14:44 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:14:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2017823 (448:24.23, 3941MB)
9:14:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
9:14:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
9:14:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:14:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2017824 (2017824) = #2017824/448:24.24
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2017824 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
9:14:44 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4132503552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2017824 | lead-out | 1 | 0x41 | 0x00
9:14:44 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
9:14:45 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
9:14:45 PM #14 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09020600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
9:14:45 PM #15 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
9:27:22 PM #16 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2017824 (1ECA20h), lenght 0 blocks
9:27:22 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:27:54 PM #18 SCSI -1093 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
9:27:54 PM #19 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
9:27:54 PM #20 CDR -1093 File ThreadedTransferInterface.cpp, Line 1909
No seek complete
_NEC DVD_RW ND-1300A\H1 T1
9:27:54 PM #21 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909
Could not perform end of Disc-at-once
9:28:10 PM #22 SCSI -1093 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
9:28:10 PM #23 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
9:28:10 PM #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
9:28:10 PM #25 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
9:28:10 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/20/2003 8:26:58 PM
File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 9:24:08 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
4. October 2005 @ 04:09 |
Link to this message
|
hi. Quote:
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
- even though your firmware is up to date, your burner's still not recognising the media. I suspect you're trying to use 8x or higher media, that the firmware just can't cope with as the media is too new for the firmware to understand. (i do know this burner can do 4x max so i'm guessing it's firmware was never really gonna cater for much newer discs). i think that's your main problem (obviously your burner may be playing up, but the point of this troubleshooting is to do what we can with what we have). The low memory is definitely a factor, but i think here the firmware's the biggest problem.
There's nothing we can do to get that particular media to work on this burner, however it would be nice to find out what media you're trying to use. download dvd identifier (free) - http://www.afterdawn.com/software/video_software/dvd_tools/dvd_id... use it to 'identify' one of those problem discs and paste the results here..
The ultimate solution is to use 4x discs, that way the firmware can correctly use them, add more memord, and if all else fails, get another burner. but let's see what the dvd identifier shows...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
4. October 2005 @ 07:32 |
Link to this message
|
This is from the owners manual for that drive.
2.3.3 DVD WRITABLE MEDIA
a) DVD-R Media (4x/2x, 4.7GB For General DISC)
Mitsubishi (Verbatim). Taiyo-Yuden. PVC. Fuji Film. Ritck
b) DVD-RW Media (2x/lx)
JVC. Pioneer. Mitsubishi (Verbatim). TDK
c) DVD+R Media (4x/2.4x)
RICOH. Mitsubishi (Verbatim). Taiyo-Yuden. Sony
d) DVD+RW Media (2.4x)
RICOH. Mitsubishi (Verbatim). TDK
e) DVD-R W+RW Rewrite
1000 times
|
|
Gurl588
Suspended due to non-functional email address
|
11. October 2005 @ 21:34 |
Link to this message
|
|
Hi Creaky, i just wanted to say thx for all your help. Everything is working now but i had to get my computer fixed because it went bananas on me and the hard drive was all screwed up. But now everything is working and i got someone to add more memory to my computer. I just wanted to say i really appreciate your help. Thanks a lot.
|
|
Advertisement
|
|
|
Moderator
|
11. October 2005 @ 23:40 |
Link to this message
|
|
no worries, you're quite welcome. happy burning
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
