|
|
|
Nero error with Sony DW-D22A burning DVD DL
|
|
|
blcdoc
Newbie
|
4. October 2005 @ 13:23 |
Link to this message
|
|
Hi. I am hoping someone can help me... please! When trying to burn CD's with Nero 6 the burning process is aborted in less than a minute, the program telling me that the burn process has failed. Reading other threads i updated the drive to the BYS3 version, removed InCD, and tried uninstalling the driver from device manager and let it be auto reinstalled, but still my problem persists (although this time it went for a record 4 minutes!). it Has cost me about 10 DL DVD's now so i am hoping for a solution before i can afford no more!! many thanks.
Below is a copy of the error log....
1a25-0006-7130-1825-8649-2589
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12
Nero version: 6.6.0.0
Recorder: <SONY DVD RW DW-D22A> Version: BFS1 - HA 0 TA 0 - 6.6.0.0
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0S24 - HA 0 TA 1 - 6.6.0.0
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: On
DiskPeripheral : RAID_Volume0 iaStor Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D22A E: CDRom0
HL-DT-ST DVD-ROM GDR8163 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047908kB)
Free physical memory: 379MB (388300kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.10.2002
ISO compilation
20:49:57 #1 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:49:57 #2 Text 0 File Reader.cpp, Line 127
Reader running
20:49:57 #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D22A running
20:49:57 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
20:49:57 #5 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media
20:49:58 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4171407 (926:58.57, 8147MB)
20:49:58 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
20:49:58 #8 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: SONY DVD RW DW-D22A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
20:49:58 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:49:58 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4171408 (4171408) = #4171408/926:58.58
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4171408 blocks [SONY DVD RW DW-D22A]
--------------------------------------------------------------
20:49:58 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [SONY DVD RW DW-D22A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8543043584, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
4171408 | lead-out | 1 | 0x00 | 0x41
20:49:58 #12 Phase 24 File dlgbrnst.cpp, Line 1861
Caching of files started
20:50:00 #13 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
20:50:00 #14 Phase 25 File dlgbrnst.cpp, Line 1861
Caching of files completed
20:50:00 #15 Phase 36 File dlgbrnst.cpp, Line 1861
Burn process started at 2.4x (3,324 KB/s)
20:50:00 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:50:00 #17 Text 0 File DVDPlusDualLayer.cpp, Line 474
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
20:50:01 #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 490
Burning Layer 1
20:50:01 #19 Text 0 File DVDPlusDualLayer.cpp, Line 498
Start writing layer 1 at address 0 (0h)
20:50:01 #20 Text 0 File Cdrdrv.cpp, Line 8259
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D7FF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 00 00 28 64 00 - 28 64 19 1B 0B 0B 0E 0F %%7..(d.(d......
01 00 00 00 00 19 1B 0B - 0B 0E 0F 01 00 00 00 00 ................
20:50:01 #21 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 42:40,465 (2560465ms) -> OK
20:50:01 #22 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: No
20:54:54 #23 SCSI -1135 File Cdrdrv.cpp, Line 1429
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03705000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
20:54:54 #24 SCSI -1064 File Cdrdrv.cpp, Line 1429
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03A90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x9B 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02
20:54:54 #25 CDR -1135 File Writer.cpp, Line 311
Write error
SONY DVD RW DW-D22A\H0 T0
20:54:54 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
20:54:54 #27 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
20:54:55 #28 Text 0 File DVDPlusRW.cpp, Line 755
Writing extended Lead-out supported: 01 h, return code: 0
supported / do not write extended Lead-out / revision 0.4x/1.xx style
20:54:55 #29 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
20:54:55 #30 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
20:54:55 #31 Phase 38 File dlgbrnst.cpp, Line 1861
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.34, size=23420 bytes, created 21/05/2005 03:29:42
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 18/02/2005 18:50:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 07:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Senior Member
|
5. October 2005 @ 00:01 |
Link to this message
|
|
Sorry I cant really help you but I was hopeing you could point me towards the BYS3 Firm, I cant find it anywhere
I Dont no how to read logs but I took notice that DMA is off.
I will see if I can get someone to help
|
Moderator
|
5. October 2005 @ 10:56 |
Link to this message
|
Quote:
1a25-
- EDIT OUT your serial number
Quote:
Nero version: 6.6.0.0
- i used this version for absolutely ages without problem, however you do have problems so you should update to latest (6.6.0.16) as part of troubleshooting your problems
Quote:
Recorder: <SONY DVD RW DW-D22A> Version: BFS1
- hmmm, thought you'd updated to BYS3... it's here - http://dhc014.rpc1.org/Files/DVDR/DW-D22A_BYS3b.zip
Quote:
CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: On
DiskPeripheral : RAID_Volume0 iaStor Port 1 ID 0 DMA: On
- DMA needs to be ON, fix it via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 1023MB (1047908kB)
Free physical memory: 379MB (388300kB)
Memory in use : 62 %
- i always have 600MB free when i burn, i'm only mentioning your memory as you should still keep more memory free
Quote:
Finalize CD : FALSE
- just checking, did you intend to not finalise the discs
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Write error
Burn process failed at 2.4x (3,324 KB/s)
- hopefully all the recommendations will get you sorted
Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.34, size=23420 bytes, created 21/05/2005 03:29:42
- uninstall Roxio, doesn't play well with Nero. You may have to google search for Roxio Zapper to fully eradicate Roxio
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 5. October 2005 @ 11:00
|
Senior Member
|
5. October 2005 @ 22:41 |
Link to this message
|
|
@creaky, I dont want to take over the thread but I cant flash my drive and I cant find an answers.This is my first time flashing.
I Ran ltnFW, I stick in the bin, check update, It goes right to 100% and says it's in progress then the start button goes unshaded like its done flashing but it stays at 100% it dont say done.
How long should this process take?
what could fix this problem????
Am I doing something wrong?
I tryed useing MTKflash but I get errors in my floppy drive when I try to make a boot disc(this looks hard to use anyways)
I been working on this since you pointed me to the firmware!
Do you know what this new firmware all upgrades?
Thank you so much
|
Moderator
|
5. October 2005 @ 22:47 |
Link to this message
|
got the readme file from the firmware update -
Quote:
Original RPC-2 Firmware version BYS3 for the SONY DVD RW DW-D22A
Flash in Windows using "LtnFW"
If the drive is not detected after a misflash, then flash in DOS with mtkflash (1.69 or higher)
Use this command: "mtkflash # w /b BYS3.bin"
Where # is replaced by one of the following numbers:
1 - Primary Master
2 - Primary Slave
3 - Secondary Master
4 - Secondary Slave
If using mtkflash 1.80.1, then do not include the "/b" flag. Use this command: "mtkflash # w BYS3.bin"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
blcdoc
Newbie
|
9. October 2005 @ 11:17 |
Link to this message
|
|
thanks so much for that creaky... that was invaluable advice i am sure i never would have figured so many thanks. a new problem i am afraid... me DELIGHT at finally to run a successful burn has been tempered by the fact that the disc cannot be read by the drive! or my dvd-rom drive, nor by my dvd player. is this a media issue?? once more i need some help. so frustrating!
|
|
blcdoc
Newbie
|
9. October 2005 @ 11:19 |
Link to this message
|
just in case... here is the successful log file...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD RW DW-D22A> Version: BYS3 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0S24 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: On
DiskPeripheral : RAID_Volume0 iaStor Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D22A E: CDRom0
HL-DT-ST DVD-ROM GDR8163B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047908kB)
Free physical memory: 498MB (510692kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.10.2005
ISO compilation
18:54:25 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
18:54:25 #2 Text 0 File Reader.cpp, Line 127
Reader running
18:54:25 #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D22A running
18:54:25 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:54:26 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
18:54:26 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4158879 (924:11.54, 8122MB)
18:54:26 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
18:54:26 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D22A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RICOHJPN, Media Type ID: D00, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
18:54:26 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:54:26 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4158880 (4158880) = #4158880/924:11.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4158880 blocks [SONY DVD RW DW-D22A]
--------------------------------------------------------------
18:54:26 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D22A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8517386240, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4158880 | lead-out | 1 | 0x41 | 0x00
18:54:26 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
18:54:30 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
18:54:30 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
18:54:30 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
18:54:30 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:54:30 #17 Text 0 File DVDPlusDualLayer.cpp, Line 459
Disc finalized, LBA total Image size: 4158880 (8122MB), Last LBA L0: 2079455 (4061MB)
18:55:02 #18 Text 0 File DVDPlusDualLayer.cpp, Line 614
L0 Data Zone Capacity set to 2079456 (1FBAE0h, 4061MB) -> OK, confirmed setting
18:55:02 #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 641
Burning Layer 1
18:55:02 #20 Text 0 File DVDPlusDualLayer.cpp, Line 651
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
18:55:02 #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22BADF h (LBN: 1FBADF h, 4061 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RICOHJPN
Media type ID: D00
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 43 4F 48 - 4A 50 4E 44 30 30 01 40 ...RICOHJPND00.@
25 25 37 11 00 34 64 00 - 34 64 20 21 0C 0D 12 12 %%7..4d.4d.!....
02 01 01 10 00 20 21 0C - 0D 12 12 02 01 01 10 00 ......!.........
18:55:02 #22 Text 0 File DVDR.cpp, Line 5618
Drive: SONY DVD RW DW-D22A
Book Type request [LO]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
18:55:02 #23 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: DVD-ROM
18:55:02 #24 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
19:16:15 #25 CDR -1206 File DVDPlusDualLayer.cpp, Line 1895
Burning Layer 2
19:16:15 #26 Text 0 File DVDPlusDualLayer.cpp, Line 1906
Perform layer 1 to 2 jump before writing at address 2079456 (1FBAE0h)
19:37:29 #27 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-D22A > start writing Lead-Out at LBA 4158880 (3F75A0h), lenght 0 blocks
19:37:29 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:37:47 #29 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03974A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x01
19:37:47 #30 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
19:37:47 #31 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
19:37:47 #32 Text 0 File DVDR.cpp, Line 5618
Drive: SONY DVD RW DW-D22A
Book Type request [LO]: DVD+R Double Layer
Changing the Book Type was finished successfully, return code 0
19:37:47 #33 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 18/02/2005 18:50:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 07:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
Moderator
|
9. October 2005 @ 12:10 |
Link to this message
|
@blcdoc -
Hi again, glad you sort of got working before.
However, i've not done any Dual Layer burning, nor do i intend to at DL prices!, though i'll do what i can.
Your thread's title suggests you're sure you have a Sony DW-D22A and whilst i don't doubt you, this same drive caused me some grief today - http://forums.afterdawn.com/thread_view.cfm/2/241639
Basically if it's a Sony then ignore that part of my reply..it's always worth checking the obvious. I can't see anything in the logfile that jumps ot to me. I do see the booktyping has been done successfully which should obviously help the disc work in more players. So maybe it is the Layer Break problem after all...
From what i keep reading from some of my buddies round here (two that spring to mind are arniebear and kivory666, not meaning to miss anyone out- i don't pay too much attention to the DL stuff yet), Nero's not currently much good at dealing with the Layer Break. Also i don't yet know how to tell much about Dual Layer from logfiles. The recommendations i know of are to try DVD Decrypter to burn Dual Layer as it can handle Layer Breaks properly. What may be worth trying also is 'imgburn' from the guy who developed DVD Decrypter (Lightning UK).
re imgburn (haven't got around to trying it myself so am slowly reading up on it) -
http://forums.afterdawn.com/thread_view.cfm/240201
http://forums.afterdawn.com/thread_view.cfm/240834
any DL burning threads i can find, sorry, will just give you some links as am gonna get off the PC for a change, wanna watch a movie as i get up far too early for work :(
http://forums.afterdawn.com/thread_view.cfm/238291
http://forums.afterdawn.com/thread_view.cfm/241545
http://forums.afterdawn.com/thread_view.cfm/239061
http://forums.afterdawn.com/thread_view.cfm/236398
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 9. October 2005 @ 12:11
|
|
